#Message ID: 09001
#[no translated message!]
#$$$$09001
#\\
#[English]
#That option is not applicable here

#Message ID: 09610
#[no translated message!]
#$$$$09610
#\\
#[English]
#Unable to find disk %s!

#Message ID: 09002
#[no translated message!]
#$$$$09002
#\\
#[English]
#No disks found!  Please verify that your disk controller is being
#properly probed at boot time.  See the Hardware Guide on the
#Documentation menu for clues on diagnosing this type of problem.

#Message ID: 09040
#[no translated message!]
#$$$$09040
#\\
#[English]
#No devices suitable for installation found!
#Please verify that your disk controller (and attached drives)
#were detected properly.  This can be done by pressing the
#[Scroll Lock] key and using the Arrow keys to move back to
#the boot messages.  Press [Scroll Lock] again to return.

#Message ID: 09004
#[no translated message!]
#$$$$09004
#\\
#[English]
#You must assign disk labels before this option can be used.

#Message ID: 09201
#[no translated message!]
#$$$$09201
#\\
#[English]
#All filesystem information written successfully.

#Message ID: 09401
#[no translated message!]
#$$$$09401
#\\
#[English]
#Please specify a mount point for the partition

#Message ID: 09005
#[no translated message!]
#$$$$09005
#\\
#[English]
#You already have a mount point for %s assigned!

#Message ID: 09006
#[no translated message!]
#$$$$09006
#\\
#[English]
#Mount point must start with a / character

#Message ID: 09020
#[no translated message!]
#$$$$09020
#\\
#[English]
#A file system

#Message ID: 09021
#[no translated message!]
#$$$$09021
#\\
#[English]
#A swap partition.

#Message ID: 09022
#[no translated message!]
#$$$$09022
#\\
#[English]
#Please choose a partition type

#Message ID: 09023
#[no translated message!]
#$$$$09023
#\\
#[English]
#If you want to use this partition for swap space, select Swap.
#If you want to put a filesystem on it, choose FS.

#Message ID: 09402
#[no translated message!]
#$$$$09402
#\\
#[English]
#Please enter the newfs command and options you'd like to use in
#creating this file system.

#Message ID: 09024
#[no translated message!]
#$$$$09024
#\\
#[English]
#FreeBSD Disklabel Editor

#Message ID: 09025
#[no translated message!]
#$$$$09025
#\\
#[English]
#Part

#Message ID: 09055
#[no translated message!]
#$$$$09055
#\\
#[English]
#Part

#Message ID: 09026
#[no translated message!]
#$$$$09026
#\\
#[English]
#Mount

#Message ID: 09056
#[no translated message!]
#$$$$09056
#\\
#[English]
#Mount

#Message ID: 09027
#[no translated message!]
#$$$$09027
#\\
#[English]
#Size

#Message ID: 09057
#[no translated message!]
#$$$$09057
#\\
#[English]
#Size

#Message ID: 09028
#[no translated message!]
#$$$$09028
#\\
#[English]
#Newfs

#Message ID: 09058
#[no translated message!]
#$$$$09058
#\\
#[English]
#Newfs

#Message ID: 09029
#[no translated message!]
#$$$$09029
#\\
#[English]
#Disk: %s	Partition name: %s	Free: %d blocks (%dMB)

#Message ID: 09030
#[no translated message!]
#$$$$09030
#\\
#[English]
#The following commands are valid here (upper or lower case):

#Message ID: 09031
#[no translated message!]
#$$$$09031
#\\
#[English]
#C = Create        D = Delete   M = Mount pt.

#Message ID: 09061
#[no translated message!]
#$$$$09061
#\\
#[English]
#C = Create        D = Delete   M = Mount pt.

#Message ID: 09032
#[no translated message!]
#$$$$09032
#\\
#[English]
#W = Write

#Message ID: 09033
#[no translated message!]
#$$$$09033
#\\
#[English]
#N = Newfs Opts    Q = Finish   S = Toggle SoftUpdates

#Message ID: 09034
#[no translated message!]
#$$$$09034
#\\
#[English]
#T = Toggle Newfs  U = Undo     A = Auto Defaults    R = Delete+Merge

#Message ID: 09035
#[no translated message!]
#$$$$09035
#\\
#[English]
#Use F1 or ? to get more help, arrow keys to select.

#Message ID: 09007
#[no translated message!]
#$$$$09007
#\\
#[English]
#No disks found!

#Message ID: 09501
#[no translated message!]
#$$$$09501
#\\
#[English]
#You can only do this in a disk slice (at top of screen)

#Message ID: 09503
#[no translated message!]
#$$$$09503
#\\
#[English]
#You can only do this in a master partition (see top of screen)

#Message ID: 09504
#[no translated message!]
#$$$$09504
#\\
#[English]
#Not enough space to create an additional FreeBSD partition

#Message ID: 09403
#[no translated message!]
#$$$$09403
#\\
#[English]
#Please specify the partition size in blocks or append a trailing G for
#gigabytes, M for megabytes, or C for cylinders.
#%d blocks (%dMB) are free.

#Message ID: 09013
#[no translated message!]
#$$$$09013
#\\
#[English]
#The minimum filesystem size is %dMB

#Message ID: 09110
#[no translated message!]
#$$$$09110
#\\
#[English]
#Warning: This is smaller than the recommended size for a
#root partition.  For a variety of reasons, root
#partitions should usually be at least %dMB in size

#Message ID: 09016
#[no translated message!]
#$$$$09016
#\\
#[English]
#Unable to create the partition. Too big?

#Message ID: 09505
#[no translated message!]
#$$$$09505
#\\
#[English]
#Use the Disk Partition Editor to delete DOS partitions

#Message ID: 09506
#[no translated message!]
#$$$$09506
#\\
#[English]
#You don't need to specify a mountpoint for a swap partition.

#Message ID: 09018
#[no translated message!]
#$$$$09018
#\\
#[English]
#%s is an invalid mount point for a DOS partition!

#Message ID: 09601
#[no translated message!]
#$$$$09601
#\\
#[English]
#You've already written out your changes -
#it's too late to undo!

#Message ID: 09620
#[no translated message!]
#$$$$09620
#\\
#[English]
#Are you SURE you want to Undo everything?

#Message ID: 09602
#[no translated message!]
#$$$$09602
#\\
#[English]
#You've already written out your changes - if you
#wish to overwrite them, you'll have to restart
#sysinstall first.

#Message ID: 09603
#[no translated message!]
#$$$$09603
#\\
#[English]
#WARNING:  This should only be used when modifying an EXISTING
#installation.  If you are installing FreeBSD for the first time
#then you should simply type Q when you're finished here and your
#changes will be committed in one batch automatically at the end of
#these questions.
#Are you absolutely sure you want to do this now?

#Message ID: 09103
#[no translated message!]
#$$$$09103
#\\
#[English]
#Are you sure you want to go into Wizard mode?
#This is an entirely undocumented feature which you are not
#expected to understand!

#Message ID: 09019
#[no translated message!]
#$$$$09019
#\\
#[English]
#Can't find any disk devices!

#Message ID: 09507
#[no translated message!]
#$$$$09507
#\\
#[English]
#A most prudent choice!

#Message ID: 09604
#[no translated message!]
#$$$$09604
#\\
#[English]
#Invalid key %c - Type F1 or ? for help

#Message ID: 09041
#[no translated message!]
#$$$$09041
#\\
#[English]
#diskLabel:  No disk selected - can't label automatically.

#Message ID: 09042
#[no translated message!]
#$$$$09042
#\\
#[English]
#diskLabel: No disk device %s found!

#Message ID: 09043
#[no translated message!]
#$$$$09043
#\\
#[English]
#For slice entry %s, got an invalid detail entry of: %s

#Message ID: 09044
#[no translated message!]
#$$$$09044
#\\
#[English]
#Not enough free space to create partition: %s

#Message ID: 09045
#[no translated message!]
#$$$$09045
#\\
#[English]
#Unable to create from partition spec: %s. Too big?

#Message ID: 09046
#[no translated message!]
#$$$$09046
#\\
#[English]
#For slice entry %s, got an invalid detail entry of: %s

