#Message ID: 34004
#[no translated message!]
#$$$$34004
#\\
#[English]
#Please select free address area used by PC-card controller

#Message ID: 34007
#[no translated message!]
#$$$$34007
#\\
#[English]
#PC-card controller uses memory area to get card information.
#Please specify an address that is not used by other devices.
#If you're uncertain of detailed specification of your hardware,
#leave it untouched (default == 0xd0000).
#If you use PC-9801 P, NS/A, NX/C, NL/R or PC-9821 Ne please 
#select [DA] here.

#Message ID: 34005
#[no translated message!]
#$$$$34005
#\\
#[English]
#PC-card controller uses memory area to get card information.
#Please specify an address that is not used by other devices.
#If you're uncertain of detailed specification of your hardware,
#leave it untouched (default == 0xd0000).

#Message ID: 34006
#[no translated message!]
#$$$$34006
#\\
#[English]
#Press F1 for more HELP

#Message ID: 34056
#[no translated message!]
#$$$$34056
#\\
#[English]
#Please specify the IRQs that may be used by PC-Cards

#Message ID: 34057
#[no translated message!]
#$$$$34057
#\\
#[English]
#(NOTE: remove any cards that will NOT be used for installation).
#The IRQs that you choose must be free (unshared), or you risk 
#subpar performance and/or a complete system lockup (choose wisely).
#One way to determine which IRQs are available is to "cheat" and
#use the Windows 9x/2000 Device Manager as a reference prior to the
#installation.

#Message ID: 34080
#[no translated message!]
#$$$$34080
#\\
#[English]
#Select Free IRQ for PC-Cardd

#Message ID: 34082
#[no translated message!]
#$$$$34082
#\\
#[English]
#Exit this menu

#Message ID: 34084
#[no translated message!]
#$$$$34084
#\\
#[English]
#Reset selected IRQ list

#Message ID: 34086
#[no translated message!]
#$$$$34086
#\\
#[English]
#IRQ 10 is often free (verify in BIOS)

#Message ID: 34088
#[no translated message!]
#$$$$34088
#\\
#[English]
#Verify IRQ 11 is not being used as PCI shared interrupt

#Message ID: 34090
#[no translated message!]
#$$$$34090
#\\
#[English]
#IRQ 3 is often free in most laptops

#Message ID: 34092
#[no translated message!]
#$$$$34092
#\\
#[English]
#IRQ 9 may be used by video or sound or USB

#Message ID: 34094
#[no translated message!]
#$$$$34094
#\\
#[English]
#IRQ 4, usually COM1 (disable in BIOS to make free)

#Message ID: 34096
#[no translated message!]
#$$$$34096
#\\
#[English]
#IRQ 7, usually LPT1 (disable in BIOS to make free)

#Message ID: 34098
#[no translated message!]
#$$$$34098
#\\
#[English]
#IRQ 5, usually ISA Audio (disable in BIOS to make free)

#Message ID: 34100
#[no translated message!]
#$$$$34100
#\\
#[English]
#IRQ 15, usually Secondary IDE channel

#Message ID: 34102
#[no translated message!]
#$$$$34102
#\\
#[English]
#IRQ 6 will be free if laptop only has USB floppy drive

#Message ID: 34064
#[no translated message!]
#$$$$34064
#\\
#[English]
#Found PC-card slot(s).
#Use PC-card device as installation media?

#Message ID: 34042
#[no translated message!]
#$$$$34042
#\\
#[English]
#Now we start initializing PC-card controller and cards.
#If you've executed this installer from a PC-card floppy
#drive, this is the last chance to replace it with
#installation media (PC-card Ethernet, CDROM, etc.).
#Please insert installation media and press [Enter].
#If you've not plugged the PC-card installation media
#in yet, please plug it in now and press [Enter].
#Otherwise, just press [Enter] to proceed.

#Message ID: 34043
#[no translated message!]
#$$$$34043
#\\
#[English]
#Initializing PC-card controller....

#Message ID: 34051
#[no translated message!]
#$$$$34051
#\\
#[English]
#Can't open PC-card controller %s.

#Message ID: 34110
#[no translated message!]
#$$$$34110
#\\
#[English]
#ioctl %s failed.

#Message ID: 34111
#[no translated message!]
#$$$$34111
#\\
#[English]
#Warning: unable to set pccard insertion beep type for %s

