#! /usr/libexec/platform-python -s
import asyncio
import asyncio.subprocess
import argparse
import datetime
import fcntl
import ipaddress
import io
import json
import logging
from logging.config import dictConfig
import os
import platform
import pwd
import random
import shlex
import shutil
import socket
import string
import subprocess
import sys
import tempfile
import time
import errno
import struct
import ssl
from enum import Enum
from typing import Dict, List, Tuple, Optional, Union, Any, NoReturn, Callable, IO, Sequence, TypeVar, cast, Set, Iterable
import re
import uuid
from configparser import ConfigParser
from contextlib import redirect_stdout
from functools import wraps
from glob import glob
from io import StringIO
from threading import Thread, Event
from urllib.error import HTTPError, URLError
from urllib.request import urlopen, Request
from pathlib import Path
FuncT = TypeVar('FuncT', bound=Callable)
# Default container images -----------------------------------------------------
DEFAULT_IMAGE = 'quay.ceph.io/ceph-ci/ceph:master'
DEFAULT_IMAGE_IS_MASTER = True
DEFAULT_IMAGE_RELEASE = 'quincy'
DEFAULT_PROMETHEUS_IMAGE = 'quay.io/prometheus/prometheus:v2.18.1'
DEFAULT_NODE_EXPORTER_IMAGE = 'quay.io/prometheus/node-exporter:v0.18.1'
DEFAULT_ALERT_MANAGER_IMAGE = 'quay.io/prometheus/alertmanager:v0.20.0'
DEFAULT_GRAFANA_IMAGE = 'quay.io/ceph/ceph-grafana:6.7.4'
DEFAULT_HAPROXY_IMAGE = 'docker.io/library/haproxy:2.3'
DEFAULT_KEEPALIVED_IMAGE = 'docker.io/arcts/keepalived'
DEFAULT_SNMP_GATEWAY_IMAGE = 'docker.io/maxwo/snmp-notifier:v1.2.1'
DEFAULT_REGISTRY = 'docker.io' # normalize unqualified digests to this
# ------------------------------------------------------------------------------
LATEST_STABLE_RELEASE = 'pacific'
DATA_DIR = '/var/lib/ceph'
LOG_DIR = '/var/log/ceph'
LOCK_DIR = '/run/cephadm'
LOGROTATE_DIR = '/etc/logrotate.d'
SYSCTL_DIR = '/usr/lib/sysctl.d'
UNIT_DIR = '/etc/systemd/system'
LOG_DIR_MODE = 0o770
DATA_DIR_MODE = 0o700
CONTAINER_INIT = True
MIN_PODMAN_VERSION = (2, 0, 2)
CGROUPS_SPLIT_PODMAN_VERSION = (2, 1, 0)
CUSTOM_PS1 = r'[ceph: \u@\h \W]\$ '
DEFAULT_TIMEOUT = None # in seconds
DEFAULT_RETRY = 15
SHELL_DEFAULT_CONF = '/etc/ceph/ceph.conf'
SHELL_DEFAULT_KEYRING = '/etc/ceph/ceph.client.admin.keyring'
DATEFMT = '%Y-%m-%dT%H:%M:%S.%fZ'
logger: logging.Logger = None # type: ignore
"""
You can invoke cephadm in two ways:
1. The normal way, at the command line.
2. By piping the script to the python3 binary. In this latter case, you should
prepend one or more lines to the beginning of the script.
For arguments,
injected_argv = [...]
e.g.,
injected_argv = ['ls']
For reading stdin from the '--config-json -' argument,
injected_stdin = '...'
"""
cached_stdin = None
##################################
class BaseConfig:
def __init__(self) -> None:
self.image: str = ''
self.docker: bool = False
self.data_dir: str = DATA_DIR
self.log_dir: str = LOG_DIR
self.logrotate_dir: str = LOGROTATE_DIR
self.sysctl_dir: str = SYSCTL_DIR
self.unit_dir: str = UNIT_DIR
self.verbose: bool = False
self.timeout: Optional[int] = DEFAULT_TIMEOUT
self.retry: int = DEFAULT_RETRY
self.env: List[str] = []
self.memory_request: Optional[int] = None
self.memory_limit: Optional[int] = None
self.log_to_journald: Optional[bool] = None
self.container_init: bool = CONTAINER_INIT
self.container_engine: Optional[ContainerEngine] = None
def set_from_args(self, args: argparse.Namespace) -> None:
argdict: Dict[str, Any] = vars(args)
for k, v in argdict.items():
if hasattr(self, k):
setattr(self, k, v)
class CephadmContext:
def __init__(self) -> None:
self.__dict__['_args'] = None
self.__dict__['_conf'] = BaseConfig()
def set_args(self, args: argparse.Namespace) -> None:
self._conf.set_from_args(args)
self._args = args
def has_function(self) -> bool:
return 'func' in self._args
def __contains__(self, name: str) -> bool:
return hasattr(self, name)
def __getattr__(self, name: str) -> Any:
if '_conf' in self.__dict__ and hasattr(self._conf, name):
return getattr(self._conf, name)
elif '_args' in self.__dict__ and hasattr(self._args, name):
return getattr(self._args, name)
else:
return super().__getattribute__(name)
def __setattr__(self, name: str, value: Any) -> None:
if hasattr(self._conf, name):
setattr(self._conf, name, value)
elif hasattr(self._args, name):
setattr(self._args, name, value)
else:
super().__setattr__(name, value)
class ContainerEngine:
def __init__(self) -> None:
self.path = find_program(self.EXE)
@classmethod
@property
def EXE(cls) -> str:
raise NotImplementedError()
def __str__(self) -> str:
return f'{self.EXE} ({self.path})'
class Podman(ContainerEngine):
EXE = 'podman'
def __init__(self) -> None:
super().__init__()
self._version: Optional[Tuple[int, ...]] = None
@property
def version(self) -> Tuple[int, ...]:
if self._version is None:
raise RuntimeError('Please call `get_version` first')
return self._version
def get_version(self, ctx: CephadmContext) -> None:
out, _, _ = call_throws(ctx, [self.path, 'version', '--format', '{{.Client.Version}}'])
self._version = _parse_podman_version(out)
def __str__(self) -> str:
version = '.'.join(map(str, self.version))
return f'{self.EXE} ({self.path}) version {version}'
class Docker(ContainerEngine):
EXE = 'docker'
CONTAINER_PREFERENCE = (Podman, Docker) # prefer podman to docker
# Log and console output config
logging_config = {
'version': 1,
'disable_existing_loggers': True,
'formatters': {
'cephadm': {
'format': '%(asctime)s %(thread)x %(levelname)s %(message)s'
},
},
'handlers': {
'console': {
'level': 'INFO',
'class': 'logging.StreamHandler',
},
'log_file': {
'level': 'DEBUG',
'class': 'logging.handlers.WatchedFileHandler',
'formatter': 'cephadm',
'filename': '%s/cephadm.log' % LOG_DIR,
}
},
'loggers': {
'': {
'level': 'DEBUG',
'handlers': ['console', 'log_file'],
}
}
}
class termcolor:
yellow = '\033[93m'
red = '\033[31m'
end = '\033[0m'
class Error(Exception):
pass
class TimeoutExpired(Error):
pass
##################################
class Ceph(object):
daemons = ('mon', 'mgr', 'mds', 'osd', 'rgw', 'rbd-mirror',
'crash', 'cephfs-mirror')
##################################
class OSD(object):
@staticmethod
def get_sysctl_settings() -> List[str]:
return [
'# allow a large number of OSDs',
'fs.aio-max-nr = 1048576',
'kernel.pid_max = 4194304',
]
##################################
class SNMPGateway:
"""Defines an SNMP gateway between Prometheus and SNMP monitoring Frameworks"""
daemon_type = 'snmp-gateway'
SUPPORTED_VERSIONS = ['V2c', 'V3']
default_image = DEFAULT_SNMP_GATEWAY_IMAGE
DEFAULT_PORT = 9464
env_filename = 'snmp-gateway.conf'
def __init__(self,
ctx: CephadmContext,
fsid: str,
daemon_id: Union[int, str],
config_json: Dict[str, Any],
image: Optional[str] = None) -> None:
self.ctx = ctx
self.fsid = fsid
self.daemon_id = daemon_id
self.image = image or SNMPGateway.default_image
self.uid = config_json.get('uid', 0)
self.gid = config_json.get('gid', 0)
self.destination = config_json.get('destination', '')
self.snmp_version = config_json.get('snmp_version', 'V2c')
self.snmp_community = config_json.get('snmp_community', 'public')
self.log_level = config_json.get('log_level', 'info')
self.snmp_v3_auth_username = config_json.get('snmp_v3_auth_username', '')
self.snmp_v3_auth_password = config_json.get('snmp_v3_auth_password', '')
self.snmp_v3_auth_protocol = config_json.get('snmp_v3_auth_protocol', '')
self.snmp_v3_priv_protocol = config_json.get('snmp_v3_priv_protocol', '')
self.snmp_v3_priv_password = config_json.get('snmp_v3_priv_password', '')
self.snmp_v3_engine_id = config_json.get('snmp_v3_engine_id', '')
self.validate()
@classmethod
def init(cls, ctx: CephadmContext, fsid: str,
daemon_id: Union[int, str]) -> 'SNMPGateway':
assert ctx.config_json
return cls(ctx, fsid, daemon_id,
get_parm(ctx.config_json), ctx.image)
@staticmethod
def get_version(ctx: CephadmContext, fsid: str, daemon_id: str) -> Optional[str]:
"""Return the version of the notifer from it's http endpoint"""
path = os.path.join(ctx.data_dir, fsid, f'snmp-gateway.{daemon_id}', 'unit.meta')
try:
with open(path, 'r') as env:
metadata = json.loads(env.read())
except (OSError, json.JSONDecodeError):
return None
ports = metadata.get('ports', [])
if not ports:
return None
try:
with urlopen(f'http://127.0.0.1:{ports[0]}/') as r:
html = r.read().decode('utf-8').split('\n')
except (HTTPError, URLError):
return None
for h in html:
stripped = h.strip()
if stripped.startswith(('', '')) and \
stripped.endswith(('', '
')):
# (version=1.2.1, branch=HEAD, revision=7...
return stripped.split(',')[0].split('version=')[1]
return None
@property
def port(self) -> int:
if not self.ctx.tcp_ports:
return self.DEFAULT_PORT
else:
if len(self.ctx.tcp_ports) > 0:
return int(self.ctx.tcp_ports.split()[0])
else:
return self.DEFAULT_PORT
def get_daemon_args(self) -> List[str]:
v3_args = []
base_args = [
f'--web.listen-address=:{self.port}',
f'--snmp.destination={self.destination}',
f'--snmp.version={self.snmp_version}',
f'--log.level={self.log_level}',
'--snmp.trap-description-template=/etc/snmp_notifier/description-template.tpl'
]
if self.snmp_version == 'V3':
# common auth settings
v3_args.extend([
'--snmp.authentication-enabled',
f'--snmp.authentication-protocol={self.snmp_v3_auth_protocol}',
f'--snmp.security-engine-id={self.snmp_v3_engine_id}'
])
# authPriv setting is applied if we have a privacy protocol setting
if self.snmp_v3_priv_protocol:
v3_args.extend([
'--snmp.private-enabled',
f'--snmp.private-protocol={self.snmp_v3_priv_protocol}'
])
return base_args + v3_args
@property
def data_dir(self) -> str:
return os.path.join(self.ctx.data_dir, self.ctx.fsid, f'{self.daemon_type}.{self.daemon_id}')
@property
def conf_file_path(self) -> str:
return os.path.join(self.data_dir, self.env_filename)
def create_daemon_conf(self) -> None:
"""Creates the environment file holding 'secrets' passed to the snmp-notifier daemon"""
with open(os.open(self.conf_file_path, os.O_CREAT | os.O_WRONLY, 0o600), 'w') as f:
if self.snmp_version == 'V2c':
f.write(f'SNMP_NOTIFIER_COMMUNITY={self.snmp_community}\n')
else:
f.write(f'SNMP_NOTIFIER_AUTH_USERNAME={self.snmp_v3_auth_username}\n')
f.write(f'SNMP_NOTIFIER_AUTH_PASSWORD={self.snmp_v3_auth_password}\n')
if self.snmp_v3_priv_password:
f.write(f'SNMP_NOTIFIER_PRIV_PASSWORD={self.snmp_v3_priv_password}\n')
def validate(self) -> None:
"""Validate the settings
Raises:
Error: if the fsid doesn't look like an fsid
Error: if the snmp version is not supported
Error: destination IP and port address missing
"""
if not is_fsid(self.fsid):
raise Error(f'not a valid fsid: {self.fsid}')
if self.snmp_version not in SNMPGateway.SUPPORTED_VERSIONS:
raise Error(f'not a valid snmp version: {self.snmp_version}')
if not self.destination:
raise Error('config is missing destination attribute(:) of the target SNMP listener')
##################################
class Monitoring(object):
"""Define the configs for the monitoring containers"""
port_map = {
'prometheus': [9095], # Avoid default 9090, due to conflict with cockpit UI
'node-exporter': [9100],
'grafana': [3000],
'alertmanager': [9093, 9094],
}
components = {
'prometheus': {
'image': DEFAULT_PROMETHEUS_IMAGE,
'cpus': '2',
'memory': '4GB',
'args': [
'--config.file=/etc/prometheus/prometheus.yml',
'--storage.tsdb.path=/prometheus',
],
'config-json-files': [
'prometheus.yml',
],
},
'node-exporter': {
'image': DEFAULT_NODE_EXPORTER_IMAGE,
'cpus': '1',
'memory': '1GB',
'args': [
'--no-collector.timex',
],
},
'grafana': {
'image': DEFAULT_GRAFANA_IMAGE,
'cpus': '2',
'memory': '4GB',
'args': [],
'config-json-files': [
'grafana.ini',
'provisioning/datasources/ceph-dashboard.yml',
'certs/cert_file',
'certs/cert_key',
],
},
'alertmanager': {
'image': DEFAULT_ALERT_MANAGER_IMAGE,
'cpus': '2',
'memory': '2GB',
'args': [
'--cluster.listen-address=:{}'.format(port_map['alertmanager'][1]),
],
'config-json-files': [
'alertmanager.yml',
],
'config-json-args': [
'peers',
],
},
} # type: ignore
@staticmethod
def get_version(ctx, container_id, daemon_type):
# type: (CephadmContext, str, str) -> str
"""
:param: daemon_type Either "prometheus", "alertmanager" or "node-exporter"
"""
assert daemon_type in ('prometheus', 'alertmanager', 'node-exporter')
cmd = daemon_type.replace('-', '_')
code = -1
err = ''
version = ''
if daemon_type == 'alertmanager':
for cmd in ['alertmanager', 'prometheus-alertmanager']:
_, err, code = call(ctx, [
ctx.container_engine.path, 'exec', container_id, cmd,
'--version'
], verbosity=CallVerbosity.DEBUG)
if code == 0:
break
cmd = 'alertmanager' # reset cmd for version extraction
else:
_, err, code = call(ctx, [
ctx.container_engine.path, 'exec', container_id, cmd, '--version'
], verbosity=CallVerbosity.DEBUG)
if code == 0 and \
err.startswith('%s, version ' % cmd):
version = err.split(' ')[2]
return version
##################################
def populate_files(config_dir, config_files, uid, gid):
# type: (str, Dict, int, int) -> None
"""create config files for different services"""
for fname in config_files:
config_file = os.path.join(config_dir, fname)
config_content = dict_get_join(config_files, fname)
logger.info('Write file: %s' % (config_file))
with open(config_file, 'w', encoding='utf-8') as f:
os.fchown(f.fileno(), uid, gid)
os.fchmod(f.fileno(), 0o600)
f.write(config_content)
class NFSGanesha(object):
"""Defines a NFS-Ganesha container"""
daemon_type = 'nfs'
entrypoint = '/usr/bin/ganesha.nfsd'
daemon_args = ['-F', '-L', 'STDERR']
required_files = ['ganesha.conf']
port_map = {
'nfs': 2049,
}
def __init__(self,
ctx,
fsid,
daemon_id,
config_json,
image=DEFAULT_IMAGE):
# type: (CephadmContext, str, Union[int, str], Dict, str) -> None
self.ctx = ctx
self.fsid = fsid
self.daemon_id = daemon_id
self.image = image
# config-json options
self.pool = dict_get(config_json, 'pool', require=True)
self.namespace = dict_get(config_json, 'namespace')
self.userid = dict_get(config_json, 'userid')
self.extra_args = dict_get(config_json, 'extra_args', [])
self.files = dict_get(config_json, 'files', {})
self.rgw = dict_get(config_json, 'rgw', {})
# validate the supplied args
self.validate()
@classmethod
def init(cls, ctx, fsid, daemon_id):
# type: (CephadmContext, str, Union[int, str]) -> NFSGanesha
return cls(ctx, fsid, daemon_id, get_parm(ctx.config_json), ctx.image)
def get_container_mounts(self, data_dir):
# type: (str) -> Dict[str, str]
mounts = dict()
mounts[os.path.join(data_dir, 'config')] = '/etc/ceph/ceph.conf:z'
mounts[os.path.join(data_dir, 'keyring')] = '/etc/ceph/keyring:z'
mounts[os.path.join(data_dir, 'etc/ganesha')] = '/etc/ganesha:z'
if self.rgw:
cluster = self.rgw.get('cluster', 'ceph')
rgw_user = self.rgw.get('user', 'admin')
mounts[os.path.join(data_dir, 'keyring.rgw')] = \
'/var/lib/ceph/radosgw/%s-%s/keyring:z' % (cluster, rgw_user)
return mounts
@staticmethod
def get_container_envs():
# type: () -> List[str]
envs = [
'CEPH_CONF=%s' % ('/etc/ceph/ceph.conf')
]
return envs
@staticmethod
def get_version(ctx, container_id):
# type: (CephadmContext, str) -> Optional[str]
version = None
out, err, code = call(ctx,
[ctx.container_engine.path, 'exec', container_id,
NFSGanesha.entrypoint, '-v'],
verbosity=CallVerbosity.DEBUG)
if code == 0:
match = re.search(r'NFS-Ganesha Release\s*=\s*[V]*([\d.]+)', out)
if match:
version = match.group(1)
return version
def validate(self):
# type: () -> None
if not is_fsid(self.fsid):
raise Error('not an fsid: %s' % self.fsid)
if not self.daemon_id:
raise Error('invalid daemon_id: %s' % self.daemon_id)
if not self.image:
raise Error('invalid image: %s' % self.image)
# check for the required files
if self.required_files:
for fname in self.required_files:
if fname not in self.files:
raise Error('required file missing from config-json: %s' % fname)
# check for an RGW config
if self.rgw:
if not self.rgw.get('keyring'):
raise Error('RGW keyring is missing')
if not self.rgw.get('user'):
raise Error('RGW user is missing')
def get_daemon_name(self):
# type: () -> str
return '%s.%s' % (self.daemon_type, self.daemon_id)
def get_container_name(self, desc=None):
# type: (Optional[str]) -> str
cname = 'ceph-%s-%s' % (self.fsid, self.get_daemon_name())
if desc:
cname = '%s-%s' % (cname, desc)
return cname
def get_daemon_args(self):
# type: () -> List[str]
return self.daemon_args + self.extra_args
def create_daemon_dirs(self, data_dir, uid, gid):
# type: (str, int, int) -> None
"""Create files under the container data dir"""
if not os.path.isdir(data_dir):
raise OSError('data_dir is not a directory: %s' % (data_dir))
logger.info('Creating ganesha config...')
# create the ganesha conf dir
config_dir = os.path.join(data_dir, 'etc/ganesha')
makedirs(config_dir, uid, gid, 0o755)
# populate files from the config-json
populate_files(config_dir, self.files, uid, gid)
# write the RGW keyring
if self.rgw:
keyring_path = os.path.join(data_dir, 'keyring.rgw')
with open(keyring_path, 'w') as f:
os.fchmod(f.fileno(), 0o600)
os.fchown(f.fileno(), uid, gid)
f.write(self.rgw.get('keyring', ''))
##################################
class CephIscsi(object):
"""Defines a Ceph-Iscsi container"""
daemon_type = 'iscsi'
entrypoint = '/usr/bin/rbd-target-api'
required_files = ['iscsi-gateway.cfg']
def __init__(self,
ctx,
fsid,
daemon_id,
config_json,
image=DEFAULT_IMAGE):
# type: (CephadmContext, str, Union[int, str], Dict, str) -> None
self.ctx = ctx
self.fsid = fsid
self.daemon_id = daemon_id
self.image = image
# config-json options
self.files = dict_get(config_json, 'files', {})
# validate the supplied args
self.validate()
@classmethod
def init(cls, ctx, fsid, daemon_id):
# type: (CephadmContext, str, Union[int, str]) -> CephIscsi
return cls(ctx, fsid, daemon_id,
get_parm(ctx.config_json), ctx.image)
@staticmethod
def get_container_mounts(data_dir, log_dir):
# type: (str, str) -> Dict[str, str]
mounts = dict()
mounts[os.path.join(data_dir, 'config')] = '/etc/ceph/ceph.conf:z'
mounts[os.path.join(data_dir, 'keyring')] = '/etc/ceph/keyring:z'
mounts[os.path.join(data_dir, 'iscsi-gateway.cfg')] = '/etc/ceph/iscsi-gateway.cfg:z'
mounts[os.path.join(data_dir, 'configfs')] = '/sys/kernel/config'
mounts[log_dir] = '/var/log:z'
mounts['/dev'] = '/dev'
return mounts
@staticmethod
def get_container_binds():
# type: () -> List[List[str]]
binds = []
lib_modules = ['type=bind',
'source=/lib/modules',
'destination=/lib/modules',
'ro=true']
binds.append(lib_modules)
return binds
@staticmethod
def get_version(ctx, container_id):
# type: (CephadmContext, str) -> Optional[str]
version = None
out, err, code = call(ctx,
[ctx.container_engine.path, 'exec', container_id,
'/usr/bin/python3', '-c', "import pkg_resources; print(pkg_resources.require('ceph_iscsi')[0].version)"],
verbosity=CallVerbosity.DEBUG)
if code == 0:
version = out.strip()
return version
def validate(self):
# type: () -> None
if not is_fsid(self.fsid):
raise Error('not an fsid: %s' % self.fsid)
if not self.daemon_id:
raise Error('invalid daemon_id: %s' % self.daemon_id)
if not self.image:
raise Error('invalid image: %s' % self.image)
# check for the required files
if self.required_files:
for fname in self.required_files:
if fname not in self.files:
raise Error('required file missing from config-json: %s' % fname)
def get_daemon_name(self):
# type: () -> str
return '%s.%s' % (self.daemon_type, self.daemon_id)
def get_container_name(self, desc=None):
# type: (Optional[str]) -> str
cname = 'ceph-%s-%s' % (self.fsid, self.get_daemon_name())
if desc:
cname = '%s-%s' % (cname, desc)
return cname
def create_daemon_dirs(self, data_dir, uid, gid):
# type: (str, int, int) -> None
"""Create files under the container data dir"""
if not os.path.isdir(data_dir):
raise OSError('data_dir is not a directory: %s' % (data_dir))
logger.info('Creating ceph-iscsi config...')
configfs_dir = os.path.join(data_dir, 'configfs')
makedirs(configfs_dir, uid, gid, 0o755)
# populate files from the config-json
populate_files(data_dir, self.files, uid, gid)
@staticmethod
def configfs_mount_umount(data_dir, mount=True):
# type: (str, bool) -> List[str]
mount_path = os.path.join(data_dir, 'configfs')
if mount:
cmd = 'if ! grep -qs {0} /proc/mounts; then ' \
'mount -t configfs none {0}; fi'.format(mount_path)
else:
cmd = 'if grep -qs {0} /proc/mounts; then ' \
'umount {0}; fi'.format(mount_path)
return cmd.split()
def get_tcmu_runner_container(self):
# type: () -> CephContainer
tcmu_container = get_container(self.ctx, self.fsid, self.daemon_type, self.daemon_id)
tcmu_container.entrypoint = '/usr/bin/tcmu-runner'
tcmu_container.cname = self.get_container_name(desc='tcmu')
# remove extra container args for tcmu container.
# extra args could cause issue with forking service type
tcmu_container.container_args = []
return tcmu_container
##################################
class HAproxy(object):
"""Defines an HAproxy container"""
daemon_type = 'haproxy'
required_files = ['haproxy.cfg']
default_image = DEFAULT_HAPROXY_IMAGE
def __init__(self,
ctx: CephadmContext,
fsid: str, daemon_id: Union[int, str],
config_json: Dict, image: str) -> None:
self.ctx = ctx
self.fsid = fsid
self.daemon_id = daemon_id
self.image = image
# config-json options
self.files = dict_get(config_json, 'files', {})
self.validate()
@classmethod
def init(cls, ctx: CephadmContext,
fsid: str, daemon_id: Union[int, str]) -> 'HAproxy':
return cls(ctx, fsid, daemon_id, get_parm(ctx.config_json),
ctx.image)
def create_daemon_dirs(self, data_dir: str, uid: int, gid: int) -> None:
"""Create files under the container data dir"""
if not os.path.isdir(data_dir):
raise OSError('data_dir is not a directory: %s' % (data_dir))
# create additional directories in data dir for HAproxy to use
if not os.path.isdir(os.path.join(data_dir, 'haproxy')):
makedirs(os.path.join(data_dir, 'haproxy'), uid, gid, DATA_DIR_MODE)
data_dir = os.path.join(data_dir, 'haproxy')
populate_files(data_dir, self.files, uid, gid)
def get_daemon_args(self) -> List[str]:
return ['haproxy', '-f', '/var/lib/haproxy/haproxy.cfg']
def validate(self):
# type: () -> None
if not is_fsid(self.fsid):
raise Error('not an fsid: %s' % self.fsid)
if not self.daemon_id:
raise Error('invalid daemon_id: %s' % self.daemon_id)
if not self.image:
raise Error('invalid image: %s' % self.image)
# check for the required files
if self.required_files:
for fname in self.required_files:
if fname not in self.files:
raise Error('required file missing from config-json: %s' % fname)
def get_daemon_name(self):
# type: () -> str
return '%s.%s' % (self.daemon_type, self.daemon_id)
def get_container_name(self, desc=None):
# type: (Optional[str]) -> str
cname = 'ceph-%s-%s' % (self.fsid, self.get_daemon_name())
if desc:
cname = '%s-%s' % (cname, desc)
return cname
def extract_uid_gid_haproxy(self) -> Tuple[int, int]:
# better directory for this?
return extract_uid_gid(self.ctx, file_path='/var/lib')
@staticmethod
def get_container_mounts(data_dir: str) -> Dict[str, str]:
mounts = dict()
mounts[os.path.join(data_dir, 'haproxy')] = '/var/lib/haproxy'
return mounts
@staticmethod
def get_sysctl_settings() -> List[str]:
return [
'# IP forwarding',
'net.ipv4.ip_forward = 1',
]
##################################
class Keepalived(object):
"""Defines an Keepalived container"""
daemon_type = 'keepalived'
required_files = ['keepalived.conf']
default_image = DEFAULT_KEEPALIVED_IMAGE
def __init__(self,
ctx: CephadmContext,
fsid: str, daemon_id: Union[int, str],
config_json: Dict, image: str) -> None:
self.ctx = ctx
self.fsid = fsid
self.daemon_id = daemon_id
self.image = image
# config-json options
self.files = dict_get(config_json, 'files', {})
self.validate()
@classmethod
def init(cls, ctx: CephadmContext, fsid: str,
daemon_id: Union[int, str]) -> 'Keepalived':
return cls(ctx, fsid, daemon_id,
get_parm(ctx.config_json), ctx.image)
def create_daemon_dirs(self, data_dir: str, uid: int, gid: int) -> None:
"""Create files under the container data dir"""
if not os.path.isdir(data_dir):
raise OSError('data_dir is not a directory: %s' % (data_dir))
# create additional directories in data dir for keepalived to use
if not os.path.isdir(os.path.join(data_dir, 'keepalived')):
makedirs(os.path.join(data_dir, 'keepalived'), uid, gid, DATA_DIR_MODE)
# populate files from the config-json
populate_files(data_dir, self.files, uid, gid)
def validate(self):
# type: () -> None
if not is_fsid(self.fsid):
raise Error('not an fsid: %s' % self.fsid)
if not self.daemon_id:
raise Error('invalid daemon_id: %s' % self.daemon_id)
if not self.image:
raise Error('invalid image: %s' % self.image)
# check for the required files
if self.required_files:
for fname in self.required_files:
if fname not in self.files:
raise Error('required file missing from config-json: %s' % fname)
def get_daemon_name(self):
# type: () -> str
return '%s.%s' % (self.daemon_type, self.daemon_id)
def get_container_name(self, desc=None):
# type: (Optional[str]) -> str
cname = 'ceph-%s-%s' % (self.fsid, self.get_daemon_name())
if desc:
cname = '%s-%s' % (cname, desc)
return cname
@staticmethod
def get_container_envs():
# type: () -> List[str]
envs = [
'KEEPALIVED_AUTOCONF=false',
'KEEPALIVED_CONF=/etc/keepalived/keepalived.conf',
'KEEPALIVED_CMD=/usr/sbin/keepalived -n -l -f /etc/keepalived/keepalived.conf',
'KEEPALIVED_DEBUG=false'
]
return envs
@staticmethod
def get_sysctl_settings() -> List[str]:
return [
'# IP forwarding and non-local bind',
'net.ipv4.ip_forward = 1',
'net.ipv4.ip_nonlocal_bind = 1',
]
def extract_uid_gid_keepalived(self) -> Tuple[int, int]:
# better directory for this?
return extract_uid_gid(self.ctx, file_path='/var/lib')
@staticmethod
def get_container_mounts(data_dir: str) -> Dict[str, str]:
mounts = dict()
mounts[os.path.join(data_dir, 'keepalived.conf')] = '/etc/keepalived/keepalived.conf'
return mounts
##################################
class CustomContainer(object):
"""Defines a custom container"""
daemon_type = 'container'
def __init__(self,
fsid: str, daemon_id: Union[int, str],
config_json: Dict, image: str) -> None:
self.fsid = fsid
self.daemon_id = daemon_id
self.image = image
# config-json options
self.entrypoint = dict_get(config_json, 'entrypoint')
self.uid = dict_get(config_json, 'uid', 65534) # nobody
self.gid = dict_get(config_json, 'gid', 65534) # nobody
self.volume_mounts = dict_get(config_json, 'volume_mounts', {})
self.args = dict_get(config_json, 'args', [])
self.envs = dict_get(config_json, 'envs', [])
self.privileged = dict_get(config_json, 'privileged', False)
self.bind_mounts = dict_get(config_json, 'bind_mounts', [])
self.ports = dict_get(config_json, 'ports', [])
self.dirs = dict_get(config_json, 'dirs', [])
self.files = dict_get(config_json, 'files', {})
@classmethod
def init(cls, ctx: CephadmContext,
fsid: str, daemon_id: Union[int, str]) -> 'CustomContainer':
return cls(fsid, daemon_id,
get_parm(ctx.config_json), ctx.image)
def create_daemon_dirs(self, data_dir: str, uid: int, gid: int) -> None:
"""
Create dirs/files below the container data directory.
"""
logger.info('Creating custom container configuration '
'dirs/files in {} ...'.format(data_dir))
if not os.path.isdir(data_dir):
raise OSError('data_dir is not a directory: %s' % data_dir)
for dir_path in self.dirs:
logger.info('Creating directory: {}'.format(dir_path))
dir_path = os.path.join(data_dir, dir_path.strip('/'))
makedirs(dir_path, uid, gid, 0o755)
for file_path in self.files:
logger.info('Creating file: {}'.format(file_path))
content = dict_get_join(self.files, file_path)
file_path = os.path.join(data_dir, file_path.strip('/'))
with open(file_path, 'w', encoding='utf-8') as f:
os.fchown(f.fileno(), uid, gid)
os.fchmod(f.fileno(), 0o600)
f.write(content)
def get_daemon_args(self) -> List[str]:
return []
def get_container_args(self) -> List[str]:
return self.args
def get_container_envs(self) -> List[str]:
return self.envs
def get_container_mounts(self, data_dir: str) -> Dict[str, str]:
"""
Get the volume mounts. Relative source paths will be located below
`/var/lib/ceph//`.
Example:
{
/foo/conf: /conf
foo/conf: /conf
}
becomes
{
/foo/conf: /conf
/var/lib/ceph///foo/conf: /conf
}
"""
mounts = {}
for source, destination in self.volume_mounts.items():
source = os.path.join(data_dir, source)
mounts[source] = destination
return mounts
def get_container_binds(self, data_dir: str) -> List[List[str]]:
"""
Get the bind mounts. Relative `source=...` paths will be located below
`/var/lib/ceph//`.
Example:
[
'type=bind',
'source=lib/modules',
'destination=/lib/modules',
'ro=true'
]
becomes
[
...
'source=/var/lib/ceph///lib/modules',
...
]
"""
binds = self.bind_mounts.copy()
for bind in binds:
for index, value in enumerate(bind):
match = re.match(r'^source=(.+)$', value)
if match:
bind[index] = 'source={}'.format(os.path.join(
data_dir, match.group(1)))
return binds
##################################
def touch(file_path: str, uid: Optional[int] = None, gid: Optional[int] = None) -> None:
Path(file_path).touch()
if uid and gid:
os.chown(file_path, uid, gid)
##################################
def dict_get(d: Dict, key: str, default: Any = None, require: bool = False) -> Any:
"""
Helper function to get a key from a dictionary.
:param d: The dictionary to process.
:param key: The name of the key to get.
:param default: The default value in case the key does not
exist. Default is `None`.
:param require: Set to `True` if the key is required. An
exception will be raised if the key does not exist in
the given dictionary.
:return: Returns the value of the given key.
:raises: :exc:`self.Error` if the given key does not exist
and `require` is set to `True`.
"""
if require and key not in d.keys():
raise Error('{} missing from dict'.format(key))
return d.get(key, default) # type: ignore
##################################
def dict_get_join(d: Dict, key: str) -> Any:
"""
Helper function to get the value of a given key from a dictionary.
`List` values will be converted to a string by joining them with a
line break.
:param d: The dictionary to process.
:param key: The name of the key to get.
:return: Returns the value of the given key. If it was a `list`, it
will be joining with a line break.
"""
value = d.get(key)
if isinstance(value, list):
value = '\n'.join(map(str, value))
return value
##################################
def get_supported_daemons():
# type: () -> List[str]
supported_daemons = list(Ceph.daemons)
supported_daemons.extend(Monitoring.components)
supported_daemons.append(NFSGanesha.daemon_type)
supported_daemons.append(CephIscsi.daemon_type)
supported_daemons.append(CustomContainer.daemon_type)
supported_daemons.append(HAproxy.daemon_type)
supported_daemons.append(Keepalived.daemon_type)
supported_daemons.append(CephadmAgent.daemon_type)
supported_daemons.append(SNMPGateway.daemon_type)
assert len(supported_daemons) == len(set(supported_daemons))
return supported_daemons
##################################
class PortOccupiedError(Error):
pass
def attempt_bind(ctx, s, address, port):
# type: (CephadmContext, socket.socket, str, int) -> None
try:
s.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
s.bind((address, port))
except OSError as e:
if e.errno == errno.EADDRINUSE:
msg = 'Cannot bind to IP %s port %d: %s' % (address, port, e)
logger.warning(msg)
raise PortOccupiedError(msg)
else:
raise Error(e)
except Exception as e:
raise Error(e)
finally:
s.close()
def port_in_use(ctx, port_num):
# type: (CephadmContext, int) -> bool
"""Detect whether a port is in use on the local machine - IPv4 and IPv6"""
logger.info('Verifying port %d ...' % port_num)
def _port_in_use(af: socket.AddressFamily, address: str) -> bool:
try:
s = socket.socket(af, socket.SOCK_STREAM)
attempt_bind(ctx, s, address, port_num)
except PortOccupiedError:
return True
except OSError as e:
if e.errno in (errno.EAFNOSUPPORT, errno.EADDRNOTAVAIL):
# Ignore EAFNOSUPPORT and EADDRNOTAVAIL as two interfaces are
# being tested here and one might be intentionally be disabled.
# In that case no error should be raised.
return False
else:
raise e
return False
return any(_port_in_use(af, address) for af, address in (
(socket.AF_INET, '0.0.0.0'),
(socket.AF_INET6, '::')
))
def check_ip_port(ctx, ip, port):
# type: (CephadmContext, str, int) -> None
if not ctx.skip_ping_check:
logger.info('Verifying IP %s port %d ...' % (ip, port))
if is_ipv6(ip):
s = socket.socket(socket.AF_INET6, socket.SOCK_STREAM)
ip = unwrap_ipv6(ip)
else:
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
attempt_bind(ctx, s, ip, port)
##################################
# this is an abbreviated version of
# https://github.com/benediktschmitt/py-filelock/blob/master/filelock.py
# that drops all of the compatibility (this is Unix/Linux only).
class Timeout(TimeoutError):
"""
Raised when the lock could not be acquired in *timeout*
seconds.
"""
def __init__(self, lock_file: str) -> None:
"""
"""
#: The path of the file lock.
self.lock_file = lock_file
return None
def __str__(self) -> str:
temp = "The file lock '{}' could not be acquired."\
.format(self.lock_file)
return temp
class _Acquire_ReturnProxy(object):
def __init__(self, lock: 'FileLock') -> None:
self.lock = lock
return None
def __enter__(self) -> 'FileLock':
return self.lock
def __exit__(self, exc_type: Any, exc_value: Any, traceback: Any) -> None:
self.lock.release()
return None
class FileLock(object):
def __init__(self, ctx: CephadmContext, name: str, timeout: int = -1) -> None:
if not os.path.exists(LOCK_DIR):
os.mkdir(LOCK_DIR, 0o700)
self._lock_file = os.path.join(LOCK_DIR, name + '.lock')
self.ctx = ctx
# The file descriptor for the *_lock_file* as it is returned by the
# os.open() function.
# This file lock is only NOT None, if the object currently holds the
# lock.
self._lock_file_fd: Optional[int] = None
self.timeout = timeout
# The lock counter is used for implementing the nested locking
# mechanism. Whenever the lock is acquired, the counter is increased and
# the lock is only released, when this value is 0 again.
self._lock_counter = 0
return None
@property
def is_locked(self) -> bool:
return self._lock_file_fd is not None
def acquire(self, timeout: Optional[int] = None, poll_intervall: float = 0.05) -> _Acquire_ReturnProxy:
"""
Acquires the file lock or fails with a :exc:`Timeout` error.
.. code-block:: python
# You can use this method in the context manager (recommended)
with lock.acquire():
pass
# Or use an equivalent try-finally construct:
lock.acquire()
try:
pass
finally:
lock.release()
:arg float timeout:
The maximum time waited for the file lock.
If ``timeout < 0``, there is no timeout and this method will
block until the lock could be acquired.
If ``timeout`` is None, the default :attr:`~timeout` is used.
:arg float poll_intervall:
We check once in *poll_intervall* seconds if we can acquire the
file lock.
:raises Timeout:
if the lock could not be acquired in *timeout* seconds.
.. versionchanged:: 2.0.0
This method returns now a *proxy* object instead of *self*,
so that it can be used in a with statement without side effects.
"""
# Use the default timeout, if no timeout is provided.
if timeout is None:
timeout = self.timeout
# Increment the number right at the beginning.
# We can still undo it, if something fails.
self._lock_counter += 1
lock_id = id(self)
lock_filename = self._lock_file
start_time = time.time()
try:
while True:
if not self.is_locked:
logger.debug('Acquiring lock %s on %s', lock_id,
lock_filename)
self._acquire()
if self.is_locked:
logger.debug('Lock %s acquired on %s', lock_id,
lock_filename)
break
elif timeout >= 0 and time.time() - start_time > timeout:
logger.warning('Timeout acquiring lock %s on %s', lock_id,
lock_filename)
raise Timeout(self._lock_file)
else:
logger.debug(
'Lock %s not acquired on %s, waiting %s seconds ...',
lock_id, lock_filename, poll_intervall
)
time.sleep(poll_intervall)
except Exception:
# Something did go wrong, so decrement the counter.
self._lock_counter = max(0, self._lock_counter - 1)
raise
return _Acquire_ReturnProxy(lock=self)
def release(self, force: bool = False) -> None:
"""
Releases the file lock.
Please note, that the lock is only completly released, if the lock
counter is 0.
Also note, that the lock file itself is not automatically deleted.
:arg bool force:
If true, the lock counter is ignored and the lock is released in
every case.
"""
if self.is_locked:
self._lock_counter -= 1
if self._lock_counter == 0 or force:
# lock_id = id(self)
# lock_filename = self._lock_file
# Can't log in shutdown:
# File "/usr/lib64/python3.9/logging/__init__.py", line 1175, in _open
# NameError: name 'open' is not defined
# logger.debug('Releasing lock %s on %s', lock_id, lock_filename)
self._release()
self._lock_counter = 0
# logger.debug('Lock %s released on %s', lock_id, lock_filename)
return None
def __enter__(self) -> 'FileLock':
self.acquire()
return self
def __exit__(self, exc_type: Any, exc_value: Any, traceback: Any) -> None:
self.release()
return None
def __del__(self) -> None:
self.release(force=True)
return None
def _acquire(self) -> None:
open_mode = os.O_RDWR | os.O_CREAT | os.O_TRUNC
fd = os.open(self._lock_file, open_mode)
try:
fcntl.flock(fd, fcntl.LOCK_EX | fcntl.LOCK_NB)
except (IOError, OSError):
os.close(fd)
else:
self._lock_file_fd = fd
return None
def _release(self) -> None:
# Do not remove the lockfile:
#
# https://github.com/benediktschmitt/py-filelock/issues/31
# https://stackoverflow.com/questions/17708885/flock-removing-locked-file-without-race-condition
fd = self._lock_file_fd
self._lock_file_fd = None
fcntl.flock(fd, fcntl.LOCK_UN) # type: ignore
os.close(fd) # type: ignore
return None
##################################
# Popen wrappers, lifted from ceph-volume
class CallVerbosity(Enum):
SILENT = 0
# log stdout/stderr to logger.debug
DEBUG = 1
# On a non-zero exit status, it will forcefully set
# logging ON for the terminal
VERBOSE_ON_FAILURE = 2
# log at info (instead of debug) level.
VERBOSE = 3
if sys.version_info < (3, 8):
import itertools
import threading
import warnings
from asyncio import events
class ThreadedChildWatcher(asyncio.AbstractChildWatcher):
"""Threaded child watcher implementation.
The watcher uses a thread per process
for waiting for the process finish.
It doesn't require subscription on POSIX signal
but a thread creation is not free.
The watcher has O(1) complexity, its performance doesn't depend
on amount of spawn processes.
"""
def __init__(self) -> None:
self._pid_counter = itertools.count(0)
self._threads: Dict[Any, Any] = {}
def is_active(self) -> bool:
return True
def close(self) -> None:
self._join_threads()
def _join_threads(self) -> None:
"""Internal: Join all non-daemon threads"""
threads = [thread for thread in list(self._threads.values())
if thread.is_alive() and not thread.daemon]
for thread in threads:
thread.join()
def __enter__(self) -> Any:
return self
def __exit__(self, exc_type: Any, exc_val: Any, exc_tb: Any) -> None:
pass
def __del__(self, _warn: Any = warnings.warn) -> None:
threads = [thread for thread in list(self._threads.values())
if thread.is_alive()]
if threads:
_warn(f'{self.__class__} has registered but not finished child processes',
ResourceWarning,
source=self)
def add_child_handler(self, pid: Any, callback: Any, *args: Any) -> None:
loop = events.get_event_loop()
thread = threading.Thread(target=self._do_waitpid,
name=f'waitpid-{next(self._pid_counter)}',
args=(loop, pid, callback, args),
daemon=True)
self._threads[pid] = thread
thread.start()
def remove_child_handler(self, pid: Any) -> bool:
# asyncio never calls remove_child_handler() !!!
# The method is no-op but is implemented because
# abstract base classe requires it
return True
def attach_loop(self, loop: Any) -> None:
pass
def _do_waitpid(self, loop: Any, expected_pid: Any, callback: Any, args: Any) -> None:
assert expected_pid > 0
try:
pid, status = os.waitpid(expected_pid, 0)
except ChildProcessError:
# The child process is already reaped
# (may happen if waitpid() is called elsewhere).
pid = expected_pid
returncode = 255
logger.warning(
'Unknown child process pid %d, will report returncode 255',
pid)
else:
if os.WIFEXITED(status):
returncode = os.WEXITSTATUS(status)
elif os.WIFSIGNALED(status):
returncode = -os.WTERMSIG(status)
else:
raise ValueError(f'unknown wait status {status}')
if loop.get_debug():
logger.debug('process %s exited with returncode %s',
expected_pid, returncode)
if loop.is_closed():
logger.warning('Loop %r that handles pid %r is closed', loop, pid)
else:
loop.call_soon_threadsafe(callback, pid, returncode, *args)
self._threads.pop(expected_pid)
# unlike SafeChildWatcher which handles SIGCHLD in the main thread,
# ThreadedChildWatcher runs in a separated thread, hence allows us to
# run create_subprocess_exec() in non-main thread, see
# https://bugs.python.org/issue35621
asyncio.set_child_watcher(ThreadedChildWatcher())
try:
from asyncio import run as async_run # type: ignore[attr-defined]
except ImportError:
def async_run(coro): # type: ignore
loop = asyncio.new_event_loop()
try:
asyncio.set_event_loop(loop)
return loop.run_until_complete(coro)
finally:
try:
loop.run_until_complete(loop.shutdown_asyncgens())
finally:
asyncio.set_event_loop(None)
loop.close()
def call(ctx: CephadmContext,
command: List[str],
desc: Optional[str] = None,
verbosity: CallVerbosity = CallVerbosity.VERBOSE_ON_FAILURE,
timeout: Optional[int] = DEFAULT_TIMEOUT,
**kwargs: Any) -> Tuple[str, str, int]:
"""
Wrap subprocess.Popen to
- log stdout/stderr to a logger,
- decode utf-8
- cleanly return out, err, returncode
:param timeout: timeout in seconds
"""
prefix = command[0] if desc is None else desc
if prefix:
prefix += ': '
timeout = timeout or ctx.timeout
async def tee(reader: asyncio.StreamReader) -> str:
collected = StringIO()
async for line in reader:
message = line.decode('utf-8')
collected.write(message)
if verbosity == CallVerbosity.VERBOSE:
logger.info(prefix + message.rstrip())
elif verbosity != CallVerbosity.SILENT:
logger.debug(prefix + message.rstrip())
return collected.getvalue()
async def run_with_timeout() -> Tuple[str, str, int]:
process = await asyncio.create_subprocess_exec(
*command,
stdout=asyncio.subprocess.PIPE,
stderr=asyncio.subprocess.PIPE,
env=os.environ.copy())
assert process.stdout
assert process.stderr
try:
stdout, stderr = await asyncio.gather(tee(process.stdout),
tee(process.stderr))
returncode = await asyncio.wait_for(process.wait(), timeout)
except asyncio.TimeoutError:
logger.info(prefix + f'timeout after {timeout} seconds')
return '', '', 124
else:
return stdout, stderr, returncode
stdout, stderr, returncode = async_run(run_with_timeout())
if returncode != 0 and verbosity == CallVerbosity.VERBOSE_ON_FAILURE:
logger.info('Non-zero exit code %d from %s',
returncode, ' '.join(command))
for line in stdout.splitlines():
logger.info(prefix + 'stdout ' + line)
for line in stderr.splitlines():
logger.info(prefix + 'stderr ' + line)
return stdout, stderr, returncode
def call_throws(
ctx: CephadmContext,
command: List[str],
desc: Optional[str] = None,
verbosity: CallVerbosity = CallVerbosity.VERBOSE_ON_FAILURE,
timeout: Optional[int] = DEFAULT_TIMEOUT,
**kwargs: Any) -> Tuple[str, str, int]:
out, err, ret = call(ctx, command, desc, verbosity, timeout, **kwargs)
if ret:
for s in (out, err):
if s.strip() and len(s.splitlines()) <= 2: # readable message?
raise RuntimeError(f'Failed command: {" ".join(command)}: {s}')
raise RuntimeError('Failed command: %s' % ' '.join(command))
return out, err, ret
def call_timeout(ctx, command, timeout):
# type: (CephadmContext, List[str], int) -> int
logger.debug('Running command (timeout=%s): %s'
% (timeout, ' '.join(command)))
def raise_timeout(command, timeout):
# type: (List[str], int) -> NoReturn
msg = 'Command `%s` timed out after %s seconds' % (command, timeout)
logger.debug(msg)
raise TimeoutExpired(msg)
try:
return subprocess.call(command, timeout=timeout, env=os.environ.copy())
except subprocess.TimeoutExpired:
raise_timeout(command, timeout)
##################################
def json_loads_retry(cli_func: Callable[[], str]) -> Any:
for sleep_secs in [1, 4, 4]:
try:
return json.loads(cli_func())
except json.JSONDecodeError:
logger.debug('Invalid JSON. Retrying in %s seconds...' % sleep_secs)
time.sleep(sleep_secs)
return json.loads(cli_func())
def is_available(ctx, what, func):
# type: (CephadmContext, str, Callable[[], bool]) -> None
"""
Wait for a service to become available
:param what: the name of the service
:param func: the callable object that determines availability
"""
retry = ctx.retry
logger.info('Waiting for %s...' % what)
num = 1
while True:
if func():
logger.info('%s is available'
% what)
break
elif num > retry:
raise Error('%s not available after %s tries'
% (what, retry))
logger.info('%s not available, waiting (%s/%s)...'
% (what, num, retry))
num += 1
time.sleep(2)
def read_config(fn):
# type: (Optional[str]) -> ConfigParser
cp = ConfigParser()
if fn:
cp.read(fn)
return cp
def pathify(p):
# type: (str) -> str
p = os.path.expanduser(p)
return os.path.abspath(p)
def get_file_timestamp(fn):
# type: (str) -> Optional[str]
try:
mt = os.path.getmtime(fn)
return datetime.datetime.fromtimestamp(
mt, tz=datetime.timezone.utc
).strftime(DATEFMT)
except Exception:
return None
def try_convert_datetime(s):
# type: (str) -> Optional[str]
# This is super irritating because
# 1) podman and docker use different formats
# 2) python's strptime can't parse either one
#
# I've seen:
# docker 18.09.7: 2020-03-03T09:21:43.636153304Z
# podman 1.7.0: 2020-03-03T15:52:30.136257504-06:00
# 2020-03-03 15:52:30.136257504 -0600 CST
# (In the podman case, there is a different string format for
# 'inspect' and 'inspect --format {{.Created}}'!!)
# In *all* cases, the 9 digit second precision is too much for
# python's strptime. Shorten it to 6 digits.
p = re.compile(r'(\.[\d]{6})[\d]*')
s = p.sub(r'\1', s)
# replace trailing Z with -0000, since (on python 3.6.8) it won't parse
if s and s[-1] == 'Z':
s = s[:-1] + '-0000'
# cut off the redundant 'CST' part that strptime can't parse, if
# present.
v = s.split(' ')
s = ' '.join(v[0:3])
# try parsing with several format strings
fmts = [
'%Y-%m-%dT%H:%M:%S.%f%z',
'%Y-%m-%d %H:%M:%S.%f %z',
]
for f in fmts:
try:
# return timestamp normalized to UTC, rendered as DATEFMT.
return datetime.datetime.strptime(s, f).astimezone(tz=datetime.timezone.utc).strftime(DATEFMT)
except ValueError:
pass
return None
def _parse_podman_version(version_str):
# type: (str) -> Tuple[int, ...]
def to_int(val: str, org_e: Optional[Exception] = None) -> int:
if not val and org_e:
raise org_e
try:
return int(val)
except ValueError as e:
return to_int(val[0:-1], org_e or e)
return tuple(map(to_int, version_str.split('.')))
def get_hostname():
# type: () -> str
return socket.gethostname()
def get_fqdn():
# type: () -> str
return socket.getfqdn() or socket.gethostname()
def get_arch():
# type: () -> str
return platform.uname().machine
def generate_service_id():
# type: () -> str
return get_hostname() + '.' + ''.join(random.choice(string.ascii_lowercase)
for _ in range(6))
def generate_password():
# type: () -> str
return ''.join(random.choice(string.ascii_lowercase + string.digits)
for i in range(10))
def normalize_container_id(i):
# type: (str) -> str
# docker adds the sha256: prefix, but AFAICS both
# docker (18.09.7 in bionic at least) and podman
# both always use sha256, so leave off the prefix
# for consistency.
prefix = 'sha256:'
if i.startswith(prefix):
i = i[len(prefix):]
return i
def make_fsid():
# type: () -> str
return str(uuid.uuid1())
def is_fsid(s):
# type: (str) -> bool
try:
uuid.UUID(s)
except ValueError:
return False
return True
def validate_fsid(func: FuncT) -> FuncT:
@wraps(func)
def _validate_fsid(ctx: CephadmContext) -> Any:
if 'fsid' in ctx and ctx.fsid:
if not is_fsid(ctx.fsid):
raise Error('not an fsid: %s' % ctx.fsid)
return func(ctx)
return cast(FuncT, _validate_fsid)
def infer_fsid(func: FuncT) -> FuncT:
"""
If we only find a single fsid in /var/lib/ceph/*, use that
"""
@infer_config
@wraps(func)
def _infer_fsid(ctx: CephadmContext) -> Any:
if 'fsid' in ctx and ctx.fsid:
logger.debug('Using specified fsid: %s' % ctx.fsid)
return func(ctx)
fsids = set()
cp = read_config(ctx.config)
if cp.has_option('global', 'fsid'):
fsids.add(cp.get('global', 'fsid'))
daemon_list = list_daemons(ctx, detail=False)
for daemon in daemon_list:
if not is_fsid(daemon['fsid']):
# 'unknown' fsid
continue
elif 'name' not in ctx or not ctx.name:
# ctx.name not specified
fsids.add(daemon['fsid'])
elif daemon['name'] == ctx.name:
# ctx.name is a match
fsids.add(daemon['fsid'])
fsids = sorted(fsids)
if not fsids:
# some commands do not always require an fsid
pass
elif len(fsids) == 1:
logger.info('Inferring fsid %s' % fsids[0])
ctx.fsid = fsids[0]
else:
raise Error('Cannot infer an fsid, one must be specified: %s' % fsids)
return func(ctx)
return cast(FuncT, _infer_fsid)
def infer_config(func: FuncT) -> FuncT:
"""
If we find a MON daemon, use the config from that container
"""
@wraps(func)
def _infer_config(ctx: CephadmContext) -> Any:
ctx.config = ctx.config if 'config' in ctx else None
if ctx.config:
logger.debug('Using specified config: %s' % ctx.config)
return func(ctx)
if 'fsid' in ctx and ctx.fsid:
name = ctx.name if 'name' in ctx else None
if not name:
daemon_list = list_daemons(ctx, detail=False)
for daemon in daemon_list:
if daemon.get('name', '').startswith('mon.') and daemon.get('fsid', '') == ctx.fsid:
name = daemon['name']
break
if name:
ctx.config = f'/var/lib/ceph/{ctx.fsid}/{name}/config'
if ctx.config:
logger.info('Inferring config %s' % ctx.config)
elif os.path.exists(SHELL_DEFAULT_CONF):
logger.debug('Using default config: %s' % SHELL_DEFAULT_CONF)
ctx.config = SHELL_DEFAULT_CONF
return func(ctx)
return cast(FuncT, _infer_config)
def _get_default_image(ctx: CephadmContext) -> str:
if DEFAULT_IMAGE_IS_MASTER:
warn = """This is a development version of cephadm.
For information regarding the latest stable release:
https://docs.ceph.com/docs/{}/cephadm/install
""".format(LATEST_STABLE_RELEASE)
for line in warn.splitlines():
logger.warning('{}{}{}'.format(termcolor.yellow, line, termcolor.end))
return DEFAULT_IMAGE
def infer_image(func: FuncT) -> FuncT:
"""
Use the most recent ceph image
"""
@wraps(func)
def _infer_image(ctx: CephadmContext) -> Any:
if not ctx.image:
ctx.image = os.environ.get('CEPHADM_IMAGE')
if not ctx.image:
ctx.image = get_last_local_ceph_image(ctx, ctx.container_engine.path)
if not ctx.image:
ctx.image = _get_default_image(ctx)
return func(ctx)
return cast(FuncT, _infer_image)
def default_image(func: FuncT) -> FuncT:
@wraps(func)
def _default_image(ctx: CephadmContext) -> Any:
if not ctx.image:
if 'name' in ctx and ctx.name:
type_ = ctx.name.split('.', 1)[0]
if type_ in Monitoring.components:
ctx.image = Monitoring.components[type_]['image']
if type_ == 'haproxy':
ctx.image = HAproxy.default_image
if type_ == 'keepalived':
ctx.image = Keepalived.default_image
if type_ == SNMPGateway.daemon_type:
ctx.image = SNMPGateway.default_image
if not ctx.image:
ctx.image = os.environ.get('CEPHADM_IMAGE')
if not ctx.image:
ctx.image = _get_default_image(ctx)
return func(ctx)
return cast(FuncT, _default_image)
def get_last_local_ceph_image(ctx: CephadmContext, container_path: str) -> Optional[str]:
"""
:return: The most recent local ceph image (already pulled)
"""
out, _, _ = call_throws(ctx,
[container_path, 'images',
'--filter', 'label=ceph=True',
'--filter', 'dangling=false',
'--format', '{{.Repository}}@{{.Digest}}'])
return _filter_last_local_ceph_image(out)
def _filter_last_local_ceph_image(out):
# type: (str) -> Optional[str]
for image in out.splitlines():
if image and not image.endswith('@'):
logger.info('Using recent ceph image %s' % image)
return image
return None
def write_tmp(s, uid, gid):
# type: (str, int, int) -> IO[str]
tmp_f = tempfile.NamedTemporaryFile(mode='w',
prefix='ceph-tmp')
os.fchown(tmp_f.fileno(), uid, gid)
tmp_f.write(s)
tmp_f.flush()
return tmp_f
def makedirs(dir, uid, gid, mode):
# type: (str, int, int, int) -> None
if not os.path.exists(dir):
os.makedirs(dir, mode=mode)
else:
os.chmod(dir, mode)
os.chown(dir, uid, gid)
os.chmod(dir, mode) # the above is masked by umask...
def get_data_dir(fsid, data_dir, t, n):
# type: (str, str, str, Union[int, str]) -> str
return os.path.join(data_dir, fsid, '%s.%s' % (t, n))
def get_log_dir(fsid, log_dir):
# type: (str, str) -> str
return os.path.join(log_dir, fsid)
def make_data_dir_base(fsid, data_dir, uid, gid):
# type: (str, str, int, int) -> str
data_dir_base = os.path.join(data_dir, fsid)
makedirs(data_dir_base, uid, gid, DATA_DIR_MODE)
makedirs(os.path.join(data_dir_base, 'crash'), uid, gid, DATA_DIR_MODE)
makedirs(os.path.join(data_dir_base, 'crash', 'posted'), uid, gid,
DATA_DIR_MODE)
return data_dir_base
def make_data_dir(ctx, fsid, daemon_type, daemon_id, uid=None, gid=None):
# type: (CephadmContext, str, str, Union[int, str], Optional[int], Optional[int]) -> str
if uid is None or gid is None:
uid, gid = extract_uid_gid(ctx)
make_data_dir_base(fsid, ctx.data_dir, uid, gid)
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
makedirs(data_dir, uid, gid, DATA_DIR_MODE)
return data_dir
def make_log_dir(ctx, fsid, uid=None, gid=None):
# type: (CephadmContext, str, Optional[int], Optional[int]) -> str
if uid is None or gid is None:
uid, gid = extract_uid_gid(ctx)
log_dir = get_log_dir(fsid, ctx.log_dir)
makedirs(log_dir, uid, gid, LOG_DIR_MODE)
return log_dir
def make_var_run(ctx, fsid, uid, gid):
# type: (CephadmContext, str, int, int) -> None
call_throws(ctx, ['install', '-d', '-m0770', '-o', str(uid), '-g', str(gid),
'/var/run/ceph/%s' % fsid])
def copy_tree(ctx, src, dst, uid=None, gid=None):
# type: (CephadmContext, List[str], str, Optional[int], Optional[int]) -> None
"""
Copy a directory tree from src to dst
"""
if uid is None or gid is None:
(uid, gid) = extract_uid_gid(ctx)
for src_dir in src:
dst_dir = dst
if os.path.isdir(dst):
dst_dir = os.path.join(dst, os.path.basename(src_dir))
logger.debug('copy directory `%s` -> `%s`' % (src_dir, dst_dir))
shutil.rmtree(dst_dir, ignore_errors=True)
shutil.copytree(src_dir, dst_dir) # dirs_exist_ok needs python 3.8
for dirpath, dirnames, filenames in os.walk(dst_dir):
logger.debug('chown %s:%s `%s`' % (uid, gid, dirpath))
os.chown(dirpath, uid, gid)
for filename in filenames:
logger.debug('chown %s:%s `%s`' % (uid, gid, filename))
os.chown(os.path.join(dirpath, filename), uid, gid)
def copy_files(ctx, src, dst, uid=None, gid=None):
# type: (CephadmContext, List[str], str, Optional[int], Optional[int]) -> None
"""
Copy a files from src to dst
"""
if uid is None or gid is None:
(uid, gid) = extract_uid_gid(ctx)
for src_file in src:
dst_file = dst
if os.path.isdir(dst):
dst_file = os.path.join(dst, os.path.basename(src_file))
logger.debug('copy file `%s` -> `%s`' % (src_file, dst_file))
shutil.copyfile(src_file, dst_file)
logger.debug('chown %s:%s `%s`' % (uid, gid, dst_file))
os.chown(dst_file, uid, gid)
def move_files(ctx, src, dst, uid=None, gid=None):
# type: (CephadmContext, List[str], str, Optional[int], Optional[int]) -> None
"""
Move files from src to dst
"""
if uid is None or gid is None:
(uid, gid) = extract_uid_gid(ctx)
for src_file in src:
dst_file = dst
if os.path.isdir(dst):
dst_file = os.path.join(dst, os.path.basename(src_file))
if os.path.islink(src_file):
# shutil.move() in py2 does not handle symlinks correctly
src_rl = os.readlink(src_file)
logger.debug("symlink '%s' -> '%s'" % (dst_file, src_rl))
os.symlink(src_rl, dst_file)
os.unlink(src_file)
else:
logger.debug("move file '%s' -> '%s'" % (src_file, dst_file))
shutil.move(src_file, dst_file)
logger.debug('chown %s:%s `%s`' % (uid, gid, dst_file))
os.chown(dst_file, uid, gid)
# copied from distutils
def find_executable(executable: str, path: Optional[str] = None) -> Optional[str]:
"""Tries to find 'executable' in the directories listed in 'path'.
A string listing directories separated by 'os.pathsep'; defaults to
os.environ['PATH']. Returns the complete filename or None if not found.
"""
_, ext = os.path.splitext(executable)
if (sys.platform == 'win32') and (ext != '.exe'):
executable = executable + '.exe'
if os.path.isfile(executable):
return executable
if path is None:
path = os.environ.get('PATH', None)
if path is None:
try:
path = os.confstr('CS_PATH')
except (AttributeError, ValueError):
# os.confstr() or CS_PATH is not available
path = os.defpath
# bpo-35755: Don't use os.defpath if the PATH environment variable is
# set to an empty string
# PATH='' doesn't match, whereas PATH=':' looks in the current directory
if not path:
return None
paths = path.split(os.pathsep)
for p in paths:
f = os.path.join(p, executable)
if os.path.isfile(f):
# the file exists, we have a shot at spawn working
return f
return None
def find_program(filename):
# type: (str) -> str
name = find_executable(filename)
if name is None:
raise ValueError('%s not found' % filename)
return name
def find_container_engine(ctx: CephadmContext) -> Optional[ContainerEngine]:
if ctx.docker:
return Docker()
else:
for i in CONTAINER_PREFERENCE:
try:
return i()
except Exception:
pass
return None
def check_container_engine(ctx: CephadmContext) -> ContainerEngine:
engine = ctx.container_engine
if not isinstance(engine, CONTAINER_PREFERENCE):
# See https://github.com/python/mypy/issues/8993
exes: List[str] = [i.EXE for i in CONTAINER_PREFERENCE] # type: ignore
raise Error('No container engine binary found ({}). Try run `apt/dnf/yum/zypper install `'.format(' or '.join(exes)))
elif isinstance(engine, Podman):
engine.get_version(ctx)
if engine.version < MIN_PODMAN_VERSION:
raise Error('podman version %d.%d.%d or later is required' % MIN_PODMAN_VERSION)
return engine
def get_unit_name(fsid, daemon_type, daemon_id=None):
# type: (str, str, Optional[Union[int, str]]) -> str
# accept either name or type + id
if daemon_id is not None:
return 'ceph-%s@%s.%s' % (fsid, daemon_type, daemon_id)
else:
return 'ceph-%s@%s' % (fsid, daemon_type)
def get_unit_name_by_daemon_name(ctx: CephadmContext, fsid: str, name: str) -> str:
daemon = get_daemon_description(ctx, fsid, name)
try:
return daemon['systemd_unit']
except KeyError:
raise Error('Failed to get unit name for {}'.format(daemon))
def check_unit(ctx, unit_name):
# type: (CephadmContext, str) -> Tuple[bool, str, bool]
# NOTE: we ignore the exit code here because systemctl outputs
# various exit codes based on the state of the service, but the
# string result is more explicit (and sufficient).
enabled = False
installed = False
try:
out, err, code = call(ctx, ['systemctl', 'is-enabled', unit_name],
verbosity=CallVerbosity.DEBUG)
if code == 0:
enabled = True
installed = True
elif 'disabled' in out:
installed = True
except Exception as e:
logger.warning('unable to run systemctl: %s' % e)
enabled = False
installed = False
state = 'unknown'
try:
out, err, code = call(ctx, ['systemctl', 'is-active', unit_name],
verbosity=CallVerbosity.DEBUG)
out = out.strip()
if out in ['active']:
state = 'running'
elif out in ['inactive']:
state = 'stopped'
elif out in ['failed', 'auto-restart']:
state = 'error'
else:
state = 'unknown'
except Exception as e:
logger.warning('unable to run systemctl: %s' % e)
state = 'unknown'
return (enabled, state, installed)
def check_units(ctx, units, enabler=None):
# type: (CephadmContext, List[str], Optional[Packager]) -> bool
for u in units:
(enabled, state, installed) = check_unit(ctx, u)
if enabled and state == 'running':
logger.info('Unit %s is enabled and running' % u)
return True
if enabler is not None:
if installed:
logger.info('Enabling unit %s' % u)
enabler.enable_service(u)
return False
def is_container_running(ctx: CephadmContext, c: 'CephContainer') -> bool:
if ctx.name.split('.', 1)[0] in ['agent', 'cephadm-exporter']:
# these are non-containerized daemon types
return False
return bool(get_running_container_name(ctx, c))
def get_running_container_name(ctx: CephadmContext, c: 'CephContainer') -> Optional[str]:
for name in [c.cname, c.old_cname]:
out, err, ret = call(ctx, [
ctx.container_engine.path, 'container', 'inspect',
'--format', '{{.State.Status}}', name
])
if out.strip() == 'running':
return name
return None
def get_legacy_config_fsid(cluster, legacy_dir=None):
# type: (str, Optional[str]) -> Optional[str]
config_file = '/etc/ceph/%s.conf' % cluster
if legacy_dir is not None:
config_file = os.path.abspath(legacy_dir + config_file)
if os.path.exists(config_file):
config = read_config(config_file)
if config.has_section('global') and config.has_option('global', 'fsid'):
return config.get('global', 'fsid')
return None
def get_legacy_daemon_fsid(ctx, cluster,
daemon_type, daemon_id, legacy_dir=None):
# type: (CephadmContext, str, str, Union[int, str], Optional[str]) -> Optional[str]
fsid = None
if daemon_type == 'osd':
try:
fsid_file = os.path.join(ctx.data_dir,
daemon_type,
'ceph-%s' % daemon_id,
'ceph_fsid')
if legacy_dir is not None:
fsid_file = os.path.abspath(legacy_dir + fsid_file)
with open(fsid_file, 'r') as f:
fsid = f.read().strip()
except IOError:
pass
if not fsid:
fsid = get_legacy_config_fsid(cluster, legacy_dir=legacy_dir)
return fsid
def should_log_to_journald(ctx: CephadmContext) -> bool:
if ctx.log_to_journald is not None:
return ctx.log_to_journald
return isinstance(ctx.container_engine, Podman) and \
ctx.container_engine.version >= CGROUPS_SPLIT_PODMAN_VERSION
def get_daemon_args(ctx, fsid, daemon_type, daemon_id):
# type: (CephadmContext, str, str, Union[int, str]) -> List[str]
r = list() # type: List[str]
if daemon_type in Ceph.daemons and daemon_type != 'crash':
r += [
'--setuser', 'ceph',
'--setgroup', 'ceph',
'--default-log-to-file=false',
]
log_to_journald = should_log_to_journald(ctx)
if log_to_journald:
r += [
'--default-log-to-journald=true',
'--default-log-to-stderr=false',
]
else:
r += [
'--default-log-to-stderr=true',
'--default-log-stderr-prefix=debug ',
]
if daemon_type == 'mon':
r += [
'--default-mon-cluster-log-to-file=false',
]
if log_to_journald:
r += [
'--default-mon-cluster-log-to-journald=true',
'--default-mon-cluster-log-to-stderr=false',
]
else:
r += ['--default-mon-cluster-log-to-stderr=true']
elif daemon_type in Monitoring.components:
metadata = Monitoring.components[daemon_type]
r += metadata.get('args', list())
# set ip and port to bind to for nodeexporter,alertmanager,prometheus
if daemon_type != 'grafana':
ip = ''
port = Monitoring.port_map[daemon_type][0]
if 'meta_json' in ctx and ctx.meta_json:
meta = json.loads(ctx.meta_json) or {}
if 'ip' in meta and meta['ip']:
ip = meta['ip']
if 'ports' in meta and meta['ports']:
port = meta['ports'][0]
r += [f'--web.listen-address={ip}:{port}']
if daemon_type == 'alertmanager':
config = get_parm(ctx.config_json)
peers = config.get('peers', list()) # type: ignore
for peer in peers:
r += ['--cluster.peer={}'.format(peer)]
# some alertmanager, by default, look elsewhere for a config
r += ['--config.file=/etc/alertmanager/alertmanager.yml']
elif daemon_type == NFSGanesha.daemon_type:
nfs_ganesha = NFSGanesha.init(ctx, fsid, daemon_id)
r += nfs_ganesha.get_daemon_args()
elif daemon_type == HAproxy.daemon_type:
haproxy = HAproxy.init(ctx, fsid, daemon_id)
r += haproxy.get_daemon_args()
elif daemon_type == CustomContainer.daemon_type:
cc = CustomContainer.init(ctx, fsid, daemon_id)
r.extend(cc.get_daemon_args())
elif daemon_type == SNMPGateway.daemon_type:
sc = SNMPGateway.init(ctx, fsid, daemon_id)
r.extend(sc.get_daemon_args())
return r
def create_daemon_dirs(ctx, fsid, daemon_type, daemon_id, uid, gid,
config=None, keyring=None):
# type: (CephadmContext, str, str, Union[int, str], int, int, Optional[str], Optional[str]) -> None
data_dir = make_data_dir(ctx, fsid, daemon_type, daemon_id, uid=uid, gid=gid)
if daemon_type in Ceph.daemons:
make_log_dir(ctx, fsid, uid=uid, gid=gid)
if config:
config_path = os.path.join(data_dir, 'config')
with open(config_path, 'w') as f:
os.fchown(f.fileno(), uid, gid)
os.fchmod(f.fileno(), 0o600)
f.write(config)
if keyring:
keyring_path = os.path.join(data_dir, 'keyring')
with open(keyring_path, 'w') as f:
os.fchmod(f.fileno(), 0o600)
os.fchown(f.fileno(), uid, gid)
f.write(keyring)
if daemon_type in Monitoring.components.keys():
config_json: Dict[str, Any] = dict()
if 'config_json' in ctx:
config_json = get_parm(ctx.config_json)
# Set up directories specific to the monitoring component
config_dir = ''
data_dir_root = ''
if daemon_type == 'prometheus':
data_dir_root = get_data_dir(fsid, ctx.data_dir,
daemon_type, daemon_id)
config_dir = 'etc/prometheus'
makedirs(os.path.join(data_dir_root, config_dir), uid, gid, 0o755)
makedirs(os.path.join(data_dir_root, config_dir, 'alerting'), uid, gid, 0o755)
makedirs(os.path.join(data_dir_root, 'data'), uid, gid, 0o755)
elif daemon_type == 'grafana':
data_dir_root = get_data_dir(fsid, ctx.data_dir,
daemon_type, daemon_id)
config_dir = 'etc/grafana'
makedirs(os.path.join(data_dir_root, config_dir), uid, gid, 0o755)
makedirs(os.path.join(data_dir_root, config_dir, 'certs'), uid, gid, 0o755)
makedirs(os.path.join(data_dir_root, config_dir, 'provisioning/datasources'), uid, gid, 0o755)
makedirs(os.path.join(data_dir_root, 'data'), uid, gid, 0o755)
touch(os.path.join(data_dir_root, 'data', 'grafana.db'), uid, gid)
elif daemon_type == 'alertmanager':
data_dir_root = get_data_dir(fsid, ctx.data_dir,
daemon_type, daemon_id)
config_dir = 'etc/alertmanager'
makedirs(os.path.join(data_dir_root, config_dir), uid, gid, 0o755)
makedirs(os.path.join(data_dir_root, config_dir, 'data'), uid, gid, 0o755)
# populate the config directory for the component from the config-json
if 'files' in config_json:
for fname in config_json['files']:
content = dict_get_join(config_json['files'], fname)
if os.path.isabs(fname):
fpath = os.path.join(data_dir_root, fname.lstrip(os.path.sep))
else:
fpath = os.path.join(data_dir_root, config_dir, fname)
with open(fpath, 'w', encoding='utf-8') as f:
os.fchown(f.fileno(), uid, gid)
os.fchmod(f.fileno(), 0o600)
f.write(content)
elif daemon_type == NFSGanesha.daemon_type:
nfs_ganesha = NFSGanesha.init(ctx, fsid, daemon_id)
nfs_ganesha.create_daemon_dirs(data_dir, uid, gid)
elif daemon_type == CephIscsi.daemon_type:
ceph_iscsi = CephIscsi.init(ctx, fsid, daemon_id)
ceph_iscsi.create_daemon_dirs(data_dir, uid, gid)
elif daemon_type == HAproxy.daemon_type:
haproxy = HAproxy.init(ctx, fsid, daemon_id)
haproxy.create_daemon_dirs(data_dir, uid, gid)
elif daemon_type == Keepalived.daemon_type:
keepalived = Keepalived.init(ctx, fsid, daemon_id)
keepalived.create_daemon_dirs(data_dir, uid, gid)
elif daemon_type == CustomContainer.daemon_type:
cc = CustomContainer.init(ctx, fsid, daemon_id)
cc.create_daemon_dirs(data_dir, uid, gid)
elif daemon_type == SNMPGateway.daemon_type:
sg = SNMPGateway.init(ctx, fsid, daemon_id)
sg.create_daemon_conf()
def get_parm(option):
# type: (str) -> Dict[str, str]
if not option:
return dict()
global cached_stdin
if option == '-':
if cached_stdin is not None:
j = cached_stdin
else:
j = sys.stdin.read()
cached_stdin = j
else:
# inline json string
if option[0] == '{' and option[-1] == '}':
j = option
# json file
elif os.path.exists(option):
with open(option, 'r') as f:
j = f.read()
else:
raise Error('Config file {} not found'.format(option))
try:
js = json.loads(j)
except ValueError as e:
raise Error('Invalid JSON in {}: {}'.format(option, e))
else:
return js
def get_config_and_keyring(ctx):
# type: (CephadmContext) -> Tuple[Optional[str], Optional[str]]
config = None
keyring = None
if 'config_json' in ctx and ctx.config_json:
d = get_parm(ctx.config_json)
config = d.get('config')
keyring = d.get('keyring')
if config and keyring:
return config, keyring
if 'config' in ctx and ctx.config:
try:
with open(ctx.config, 'r') as f:
config = f.read()
except FileNotFoundError as e:
raise Error(e)
if 'key' in ctx and ctx.key:
keyring = '[%s]\n\tkey = %s\n' % (ctx.name, ctx.key)
elif 'keyring' in ctx and ctx.keyring:
try:
with open(ctx.keyring, 'r') as f:
keyring = f.read()
except FileNotFoundError as e:
raise Error(e)
return config, keyring
def get_container_binds(ctx, fsid, daemon_type, daemon_id):
# type: (CephadmContext, str, str, Union[int, str, None]) -> List[List[str]]
binds = list()
if daemon_type == CephIscsi.daemon_type:
binds.extend(CephIscsi.get_container_binds())
elif daemon_type == CustomContainer.daemon_type:
assert daemon_id
cc = CustomContainer.init(ctx, fsid, daemon_id)
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
binds.extend(cc.get_container_binds(data_dir))
return binds
def get_container_mounts(ctx, fsid, daemon_type, daemon_id,
no_config=False):
# type: (CephadmContext, str, str, Union[int, str, None], Optional[bool]) -> Dict[str, str]
mounts = dict()
if daemon_type in Ceph.daemons:
if fsid:
run_path = os.path.join('/var/run/ceph', fsid)
if os.path.exists(run_path):
mounts[run_path] = '/var/run/ceph:z'
log_dir = get_log_dir(fsid, ctx.log_dir)
mounts[log_dir] = '/var/log/ceph:z'
crash_dir = '/var/lib/ceph/%s/crash' % fsid
if os.path.exists(crash_dir):
mounts[crash_dir] = '/var/lib/ceph/crash:z'
if daemon_type != 'crash' and should_log_to_journald(ctx):
journald_sock_dir = '/run/systemd/journal'
mounts[journald_sock_dir] = journald_sock_dir
if daemon_type in Ceph.daemons and daemon_id:
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
if daemon_type == 'rgw':
cdata_dir = '/var/lib/ceph/radosgw/ceph-rgw.%s' % (daemon_id)
else:
cdata_dir = '/var/lib/ceph/%s/ceph-%s' % (daemon_type, daemon_id)
if daemon_type != 'crash':
mounts[data_dir] = cdata_dir + ':z'
if not no_config:
mounts[data_dir + '/config'] = '/etc/ceph/ceph.conf:z'
if daemon_type in ['rbd-mirror', 'cephfs-mirror', 'crash']:
# these do not search for their keyrings in a data directory
mounts[data_dir + '/keyring'] = '/etc/ceph/ceph.client.%s.%s.keyring' % (daemon_type, daemon_id)
if daemon_type in ['mon', 'osd', 'clusterless-ceph-volume']:
mounts['/dev'] = '/dev' # FIXME: narrow this down?
mounts['/run/udev'] = '/run/udev'
if daemon_type in ['osd', 'clusterless-ceph-volume']:
mounts['/sys'] = '/sys' # for numa.cc, pick_address, cgroups, ...
mounts['/run/lvm'] = '/run/lvm'
mounts['/run/lock/lvm'] = '/run/lock/lvm'
if daemon_type == 'osd':
# selinux-policy in the container may not match the host.
if HostFacts(ctx).selinux_enabled:
selinux_folder = '/var/lib/ceph/%s/selinux' % fsid
if not os.path.exists(selinux_folder):
os.makedirs(selinux_folder, mode=0o755)
mounts[selinux_folder] = '/sys/fs/selinux:ro'
mounts['/'] = '/rootfs'
try:
if ctx.shared_ceph_folder: # make easy manager modules/ceph-volume development
ceph_folder = pathify(ctx.shared_ceph_folder)
if os.path.exists(ceph_folder):
mounts[ceph_folder + '/src/ceph-volume/ceph_volume'] = '/usr/lib/python3.6/site-packages/ceph_volume'
mounts[ceph_folder + '/src/cephadm/cephadm'] = '/usr/sbin/cephadm'
mounts[ceph_folder + '/src/pybind/mgr'] = '/usr/share/ceph/mgr'
mounts[ceph_folder + '/src/python-common/ceph'] = '/usr/lib/python3.6/site-packages/ceph'
mounts[ceph_folder + '/monitoring/ceph-mixin/dashboards_out'] = '/etc/grafana/dashboards/ceph-dashboard'
mounts[ceph_folder + '/monitoring/ceph-mixin/prometheus_alerts.yml'] = '/etc/prometheus/ceph/ceph_default_alerts.yml'
else:
logger.error('{}{}{}'.format(termcolor.red,
'Ceph shared source folder does not exist.',
termcolor.end))
except AttributeError:
pass
if daemon_type in Monitoring.components and daemon_id:
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
if daemon_type == 'prometheus':
mounts[os.path.join(data_dir, 'etc/prometheus')] = '/etc/prometheus:Z'
mounts[os.path.join(data_dir, 'data')] = '/prometheus:Z'
elif daemon_type == 'node-exporter':
mounts['/proc'] = '/host/proc:ro'
mounts['/sys'] = '/host/sys:ro'
mounts['/'] = '/rootfs:ro'
elif daemon_type == 'grafana':
mounts[os.path.join(data_dir, 'etc/grafana/grafana.ini')] = '/etc/grafana/grafana.ini:Z'
mounts[os.path.join(data_dir, 'etc/grafana/provisioning/datasources')] = '/etc/grafana/provisioning/datasources:Z'
mounts[os.path.join(data_dir, 'etc/grafana/certs')] = '/etc/grafana/certs:Z'
mounts[os.path.join(data_dir, 'data/grafana.db')] = '/var/lib/grafana/grafana.db:Z'
elif daemon_type == 'alertmanager':
mounts[os.path.join(data_dir, 'etc/alertmanager')] = '/etc/alertmanager:Z'
if daemon_type == NFSGanesha.daemon_type:
assert daemon_id
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
nfs_ganesha = NFSGanesha.init(ctx, fsid, daemon_id)
mounts.update(nfs_ganesha.get_container_mounts(data_dir))
if daemon_type == HAproxy.daemon_type:
assert daemon_id
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
mounts.update(HAproxy.get_container_mounts(data_dir))
if daemon_type == CephIscsi.daemon_type:
assert daemon_id
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
log_dir = get_log_dir(fsid, ctx.log_dir)
mounts.update(CephIscsi.get_container_mounts(data_dir, log_dir))
if daemon_type == Keepalived.daemon_type:
assert daemon_id
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
mounts.update(Keepalived.get_container_mounts(data_dir))
if daemon_type == CustomContainer.daemon_type:
assert daemon_id
cc = CustomContainer.init(ctx, fsid, daemon_id)
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
mounts.update(cc.get_container_mounts(data_dir))
return mounts
def get_ceph_volume_container(ctx: CephadmContext,
privileged: bool = True,
cname: str = '',
volume_mounts: Dict[str, str] = {},
bind_mounts: Optional[List[List[str]]] = None,
args: List[str] = [],
envs: Optional[List[str]] = None) -> 'CephContainer':
if envs is None:
envs = []
envs.append('CEPH_VOLUME_SKIP_RESTORECON=yes')
envs.append('CEPH_VOLUME_DEBUG=1')
return CephContainer(
ctx,
image=ctx.image,
entrypoint='/usr/sbin/ceph-volume',
args=args,
volume_mounts=volume_mounts,
bind_mounts=bind_mounts,
envs=envs,
privileged=privileged,
cname=cname,
memory_request=ctx.memory_request,
memory_limit=ctx.memory_limit,
)
def get_container(ctx: CephadmContext,
fsid: str, daemon_type: str, daemon_id: Union[int, str],
privileged: bool = False,
ptrace: bool = False,
container_args: Optional[List[str]] = None) -> 'CephContainer':
entrypoint: str = ''
name: str = ''
ceph_args: List[str] = []
envs: List[str] = []
host_network: bool = True
if daemon_type in Ceph.daemons:
envs.append('TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=134217728')
if container_args is None:
container_args = []
if daemon_type in ['mon', 'osd']:
# mon and osd need privileged in order for libudev to query devices
privileged = True
if daemon_type == 'rgw':
entrypoint = '/usr/bin/radosgw'
name = 'client.rgw.%s' % daemon_id
elif daemon_type == 'rbd-mirror':
entrypoint = '/usr/bin/rbd-mirror'
name = 'client.rbd-mirror.%s' % daemon_id
elif daemon_type == 'cephfs-mirror':
entrypoint = '/usr/bin/cephfs-mirror'
name = 'client.cephfs-mirror.%s' % daemon_id
elif daemon_type == 'crash':
entrypoint = '/usr/bin/ceph-crash'
name = 'client.crash.%s' % daemon_id
elif daemon_type in ['mon', 'mgr', 'mds', 'osd']:
entrypoint = '/usr/bin/ceph-' + daemon_type
name = '%s.%s' % (daemon_type, daemon_id)
elif daemon_type in Monitoring.components:
entrypoint = ''
elif daemon_type == NFSGanesha.daemon_type:
entrypoint = NFSGanesha.entrypoint
name = '%s.%s' % (daemon_type, daemon_id)
envs.extend(NFSGanesha.get_container_envs())
elif daemon_type == HAproxy.daemon_type:
name = '%s.%s' % (daemon_type, daemon_id)
container_args.extend(['--user=root']) # haproxy 2.4 defaults to a different user
elif daemon_type == Keepalived.daemon_type:
name = '%s.%s' % (daemon_type, daemon_id)
envs.extend(Keepalived.get_container_envs())
container_args.extend(['--cap-add=NET_ADMIN', '--cap-add=NET_RAW'])
elif daemon_type == CephIscsi.daemon_type:
entrypoint = CephIscsi.entrypoint
name = '%s.%s' % (daemon_type, daemon_id)
# So the container can modprobe iscsi_target_mod and have write perms
# to configfs we need to make this a privileged container.
privileged = True
elif daemon_type == CustomContainer.daemon_type:
cc = CustomContainer.init(ctx, fsid, daemon_id)
entrypoint = cc.entrypoint
host_network = False
envs.extend(cc.get_container_envs())
container_args.extend(cc.get_container_args())
if daemon_type in Monitoring.components:
uid, gid = extract_uid_gid_monitoring(ctx, daemon_type)
monitoring_args = [
'--user',
str(uid),
# FIXME: disable cpu/memory limits for the time being (not supported
# by ubuntu 18.04 kernel!)
]
container_args.extend(monitoring_args)
elif daemon_type == 'crash':
ceph_args = ['-n', name]
elif daemon_type in Ceph.daemons:
ceph_args = ['-n', name, '-f']
elif daemon_type == SNMPGateway.daemon_type:
sg = SNMPGateway.init(ctx, fsid, daemon_id)
container_args.append(
f'--env-file={sg.conf_file_path}'
)
# if using podman, set -d, --conmon-pidfile & --cidfile flags
# so service can have Type=Forking
if isinstance(ctx.container_engine, Podman):
runtime_dir = '/run'
container_args.extend([
'-d', '--log-driver', 'journald',
'--conmon-pidfile',
runtime_dir + '/ceph-%s@%s.%s.service-pid' % (fsid, daemon_type, daemon_id),
'--cidfile',
runtime_dir + '/ceph-%s@%s.%s.service-cid' % (fsid, daemon_type, daemon_id),
])
if ctx.container_engine.version >= CGROUPS_SPLIT_PODMAN_VERSION:
container_args.append('--cgroups=split')
return CephContainer.for_daemon(
ctx,
fsid=fsid,
daemon_type=daemon_type,
daemon_id=str(daemon_id),
entrypoint=entrypoint,
args=ceph_args + get_daemon_args(ctx, fsid, daemon_type, daemon_id),
container_args=container_args,
volume_mounts=get_container_mounts(ctx, fsid, daemon_type, daemon_id),
bind_mounts=get_container_binds(ctx, fsid, daemon_type, daemon_id),
envs=envs,
privileged=privileged,
ptrace=ptrace,
host_network=host_network,
)
def extract_uid_gid(ctx, img='', file_path='/var/lib/ceph'):
# type: (CephadmContext, str, Union[str, List[str]]) -> Tuple[int, int]
if not img:
img = ctx.image
if isinstance(file_path, str):
paths = [file_path]
else:
paths = file_path
ex: Optional[Tuple[str, RuntimeError]] = None
for fp in paths:
try:
out = CephContainer(
ctx,
image=img,
entrypoint='stat',
args=['-c', '%u %g', fp]
).run()
uid, gid = out.split(' ')
return int(uid), int(gid)
except RuntimeError as e:
ex = (fp, e)
if ex:
raise Error(f'Failed to extract uid/gid for path {ex[0]}: {ex[1]}')
raise RuntimeError('uid/gid not found')
def deploy_daemon(ctx, fsid, daemon_type, daemon_id, c, uid, gid,
config=None, keyring=None,
osd_fsid=None,
reconfig=False,
ports=None):
# type: (CephadmContext, str, str, Union[int, str], Optional[CephContainer], int, int, Optional[str], Optional[str], Optional[str], Optional[bool], Optional[List[int]]) -> None
ports = ports or []
if any([port_in_use(ctx, port) for port in ports]):
if daemon_type == 'mgr':
# non-fatal for mgr when we are in mgr_standby_modules=false, but we can't
# tell whether that is the case here.
logger.warning(
f"ceph-mgr TCP port(s) {','.join(map(str, ports))} already in use"
)
else:
raise Error("TCP Port(s) '{}' required for {} already in use".format(','.join(map(str, ports)), daemon_type))
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
if reconfig and not os.path.exists(data_dir):
raise Error('cannot reconfig, data path %s does not exist' % data_dir)
if daemon_type == 'mon' and not os.path.exists(data_dir):
assert config
assert keyring
# tmp keyring file
tmp_keyring = write_tmp(keyring, uid, gid)
# tmp config file
tmp_config = write_tmp(config, uid, gid)
# --mkfs
create_daemon_dirs(ctx, fsid, daemon_type, daemon_id, uid, gid)
mon_dir = get_data_dir(fsid, ctx.data_dir, 'mon', daemon_id)
log_dir = get_log_dir(fsid, ctx.log_dir)
CephContainer(
ctx,
image=ctx.image,
entrypoint='/usr/bin/ceph-mon',
args=[
'--mkfs',
'-i', str(daemon_id),
'--fsid', fsid,
'-c', '/tmp/config',
'--keyring', '/tmp/keyring',
] + get_daemon_args(ctx, fsid, 'mon', daemon_id),
volume_mounts={
log_dir: '/var/log/ceph:z',
mon_dir: '/var/lib/ceph/mon/ceph-%s:z' % (daemon_id),
tmp_keyring.name: '/tmp/keyring:z',
tmp_config.name: '/tmp/config:z',
},
).run()
# write conf
with open(mon_dir + '/config', 'w') as f:
os.fchown(f.fileno(), uid, gid)
os.fchmod(f.fileno(), 0o600)
f.write(config)
else:
# dirs, conf, keyring
create_daemon_dirs(
ctx,
fsid, daemon_type, daemon_id,
uid, gid,
config, keyring)
if not reconfig:
if daemon_type == CephadmAgent.daemon_type:
if ctx.config_json == '-':
config_js = get_parm('-')
else:
config_js = get_parm(ctx.config_json)
assert isinstance(config_js, dict)
cephadm_agent = CephadmAgent(ctx, fsid, daemon_id)
cephadm_agent.deploy_daemon_unit(config_js)
else:
if c:
deploy_daemon_units(ctx, fsid, uid, gid, daemon_type, daemon_id,
c, osd_fsid=osd_fsid, ports=ports)
else:
raise RuntimeError('attempting to deploy a daemon without a container image')
if not os.path.exists(data_dir + '/unit.created'):
with open(data_dir + '/unit.created', 'w') as f:
os.fchmod(f.fileno(), 0o600)
os.fchown(f.fileno(), uid, gid)
f.write('mtime is time the daemon deployment was created\n')
with open(data_dir + '/unit.configured', 'w') as f:
f.write('mtime is time we were last configured\n')
os.fchmod(f.fileno(), 0o600)
os.fchown(f.fileno(), uid, gid)
update_firewalld(ctx, daemon_type)
# Open ports explicitly required for the daemon
if ports:
fw = Firewalld(ctx)
fw.open_ports(ports)
fw.apply_rules()
if reconfig and daemon_type not in Ceph.daemons:
# ceph daemons do not need a restart; others (presumably) do to pick
# up the new config
call_throws(ctx, ['systemctl', 'reset-failed',
get_unit_name(fsid, daemon_type, daemon_id)])
call_throws(ctx, ['systemctl', 'restart',
get_unit_name(fsid, daemon_type, daemon_id)])
def _write_container_cmd_to_bash(ctx, file_obj, container, comment=None, background=False):
# type: (CephadmContext, IO[str], CephContainer, Optional[str], Optional[bool]) -> None
if comment:
# Sometimes adding a comment, especially if there are multiple containers in one
# unit file, makes it easier to read and grok.
file_obj.write('# ' + comment + '\n')
# Sometimes, adding `--rm` to a run_cmd doesn't work. Let's remove the container manually
file_obj.write('! ' + ' '.join(container.rm_cmd(old_cname=True)) + ' 2> /dev/null\n')
file_obj.write('! ' + ' '.join(container.rm_cmd()) + ' 2> /dev/null\n')
# Sometimes, `podman rm` doesn't find the container. Then you'll have to add `--storage`
if isinstance(ctx.container_engine, Podman):
file_obj.write(
'! '
+ ' '.join([shlex.quote(a) for a in container.rm_cmd(storage=True)])
+ ' 2> /dev/null\n')
file_obj.write(
'! '
+ ' '.join([shlex.quote(a) for a in container.rm_cmd(old_cname=True, storage=True)])
+ ' 2> /dev/null\n')
# container run command
file_obj.write(
' '.join([shlex.quote(a) for a in container.run_cmd()])
+ (' &' if background else '') + '\n')
def clean_cgroup(ctx: CephadmContext, fsid: str, unit_name: str) -> None:
# systemd may fail to cleanup cgroups from previous stopped unit, which will cause next "systemctl start" to fail.
# see https://tracker.ceph.com/issues/50998
CGROUPV2_PATH = Path('/sys/fs/cgroup')
if not (CGROUPV2_PATH / 'system.slice').exists():
# Only unified cgroup is affected, skip if not the case
return
slice_name = 'system-ceph\\x2d{}.slice'.format(fsid.replace('-', '\\x2d'))
cg_path = CGROUPV2_PATH / 'system.slice' / slice_name / f'{unit_name}.service'
if not cg_path.exists():
return
def cg_trim(path: Path) -> None:
for p in path.iterdir():
if p.is_dir():
cg_trim(p)
path.rmdir()
try:
cg_trim(cg_path)
except OSError:
logger.warning(f'Failed to trim old cgroups {cg_path}')
def deploy_daemon_units(
ctx: CephadmContext,
fsid: str,
uid: int,
gid: int,
daemon_type: str,
daemon_id: Union[int, str],
c: 'CephContainer',
enable: bool = True,
start: bool = True,
osd_fsid: Optional[str] = None,
ports: Optional[List[int]] = None,
) -> None:
# cmd
data_dir = get_data_dir(fsid, ctx.data_dir, daemon_type, daemon_id)
with open(data_dir + '/unit.run.new', 'w') as f, \
open(data_dir + '/unit.meta.new', 'w') as metaf:
f.write('set -e\n')
if daemon_type in Ceph.daemons:
install_path = find_program('install')
f.write('{install_path} -d -m0770 -o {uid} -g {gid} /var/run/ceph/{fsid}\n'.format(install_path=install_path, fsid=fsid, uid=uid, gid=gid))
# pre-start cmd(s)
if daemon_type == 'osd':
# osds have a pre-start step
assert osd_fsid
simple_fn = os.path.join('/etc/ceph/osd',
'%s-%s.json.adopted-by-cephadm' % (daemon_id, osd_fsid))
if os.path.exists(simple_fn):
f.write('# Simple OSDs need chown on startup:\n')
for n in ['block', 'block.db', 'block.wal']:
p = os.path.join(data_dir, n)
f.write('[ ! -L {p} ] || chown {uid}:{gid} {p}\n'.format(p=p, uid=uid, gid=gid))
else:
# if ceph-volume does not support 'ceph-volume activate', we must
# do 'ceph-volume lvm activate'.
test_cv = get_ceph_volume_container(
ctx,
args=['activate', '--bad-option'],
volume_mounts=get_container_mounts(ctx, fsid, daemon_type, daemon_id),
bind_mounts=get_container_binds(ctx, fsid, daemon_type, daemon_id),
cname='ceph-%s-%s.%s-activate-test' % (fsid, daemon_type, daemon_id),
)
out, err, ret = call(ctx, test_cv.run_cmd(), verbosity=CallVerbosity.SILENT)
# bad: ceph-volume: error: unrecognized arguments: activate --bad-option
# good: ceph-volume: error: unrecognized arguments: --bad-option
if 'unrecognized arguments: activate' in err:
# older ceph-volume without top-level activate or --no-tmpfs
cmd = [
'lvm', 'activate',
str(daemon_id), osd_fsid,
'--no-systemd',
]
else:
cmd = [
'activate',
'--osd-id', str(daemon_id),
'--osd-uuid', osd_fsid,
'--no-systemd',
'--no-tmpfs',
]
prestart = get_ceph_volume_container(
ctx,
args=cmd,
volume_mounts=get_container_mounts(ctx, fsid, daemon_type, daemon_id),
bind_mounts=get_container_binds(ctx, fsid, daemon_type, daemon_id),
cname='ceph-%s-%s.%s-activate' % (fsid, daemon_type, daemon_id),
)
_write_container_cmd_to_bash(ctx, f, prestart, 'LVM OSDs use ceph-volume lvm activate')
elif daemon_type == CephIscsi.daemon_type:
f.write(' '.join(CephIscsi.configfs_mount_umount(data_dir, mount=True)) + '\n')
ceph_iscsi = CephIscsi.init(ctx, fsid, daemon_id)
tcmu_container = ceph_iscsi.get_tcmu_runner_container()
_write_container_cmd_to_bash(ctx, f, tcmu_container, 'iscsi tcmu-runner container', background=True)
_write_container_cmd_to_bash(ctx, f, c, '%s.%s' % (daemon_type, str(daemon_id)))
# some metadata about the deploy
meta: Dict[str, Any] = {}
if 'meta_json' in ctx and ctx.meta_json:
meta = json.loads(ctx.meta_json) or {}
meta.update({
'memory_request': int(ctx.memory_request) if ctx.memory_request else None,
'memory_limit': int(ctx.memory_limit) if ctx.memory_limit else None,
})
if not meta.get('ports'):
meta['ports'] = ports
metaf.write(json.dumps(meta, indent=4) + '\n')
os.fchmod(f.fileno(), 0o600)
os.fchmod(metaf.fileno(), 0o600)
os.rename(data_dir + '/unit.run.new',
data_dir + '/unit.run')
os.rename(data_dir + '/unit.meta.new',
data_dir + '/unit.meta')
# post-stop command(s)
with open(data_dir + '/unit.poststop.new', 'w') as f:
if daemon_type == 'osd':
assert osd_fsid
poststop = get_ceph_volume_container(
ctx,
args=[
'lvm', 'deactivate',
str(daemon_id), osd_fsid,
],
volume_mounts=get_container_mounts(ctx, fsid, daemon_type, daemon_id),
bind_mounts=get_container_binds(ctx, fsid, daemon_type, daemon_id),
cname='ceph-%s-%s.%s-deactivate' % (fsid, daemon_type,
daemon_id),
)
_write_container_cmd_to_bash(ctx, f, poststop, 'deactivate osd')
elif daemon_type == CephIscsi.daemon_type:
# make sure we also stop the tcmu container
ceph_iscsi = CephIscsi.init(ctx, fsid, daemon_id)
tcmu_container = ceph_iscsi.get_tcmu_runner_container()
f.write('! ' + ' '.join(tcmu_container.stop_cmd()) + '\n')
f.write(' '.join(CephIscsi.configfs_mount_umount(data_dir, mount=False)) + '\n')
os.fchmod(f.fileno(), 0o600)
os.rename(data_dir + '/unit.poststop.new',
data_dir + '/unit.poststop')
# post-stop command(s)
with open(data_dir + '/unit.stop.new', 'w') as f:
f.write('! ' + ' '.join(c.stop_cmd()) + '\n')
f.write('! ' + ' '.join(c.stop_cmd(old_cname=True)) + '\n')
os.fchmod(f.fileno(), 0o600)
os.rename(data_dir + '/unit.stop.new',
data_dir + '/unit.stop')
if c:
with open(data_dir + '/unit.image.new', 'w') as f:
f.write(c.image + '\n')
os.fchmod(f.fileno(), 0o600)
os.rename(data_dir + '/unit.image.new',
data_dir + '/unit.image')
# sysctl
install_sysctl(ctx, fsid, daemon_type)
# systemd
install_base_units(ctx, fsid)
unit = get_unit_file(ctx, fsid)
unit_file = 'ceph-%s@.service' % (fsid)
with open(ctx.unit_dir + '/' + unit_file + '.new', 'w') as f:
f.write(unit)
os.rename(ctx.unit_dir + '/' + unit_file + '.new',
ctx.unit_dir + '/' + unit_file)
call_throws(ctx, ['systemctl', 'daemon-reload'])
unit_name = get_unit_name(fsid, daemon_type, daemon_id)
call(ctx, ['systemctl', 'stop', unit_name],
verbosity=CallVerbosity.DEBUG)
call(ctx, ['systemctl', 'reset-failed', unit_name],
verbosity=CallVerbosity.DEBUG)
if enable:
call_throws(ctx, ['systemctl', 'enable', unit_name])
if start:
clean_cgroup(ctx, fsid, unit_name)
call_throws(ctx, ['systemctl', 'start', unit_name])
class Firewalld(object):
def __init__(self, ctx):
# type: (CephadmContext) -> None
self.ctx = ctx
self.available = self.check()
def check(self):
# type: () -> bool
self.cmd = find_executable('firewall-cmd')
if not self.cmd:
logger.debug('firewalld does not appear to be present')
return False
(enabled, state, _) = check_unit(self.ctx, 'firewalld.service')
if not enabled:
logger.debug('firewalld.service is not enabled')
return False
if state != 'running':
logger.debug('firewalld.service is not running')
return False
logger.info('firewalld ready')
return True
def enable_service_for(self, daemon_type):
# type: (str) -> None
if not self.available:
logger.debug('Not possible to enable service <%s>. firewalld.service is not available' % daemon_type)
return
if daemon_type == 'mon':
svc = 'ceph-mon'
elif daemon_type in ['mgr', 'mds', 'osd']:
svc = 'ceph'
elif daemon_type == NFSGanesha.daemon_type:
svc = 'nfs'
else:
return
if not self.cmd:
raise RuntimeError('command not defined')
out, err, ret = call(self.ctx, [self.cmd, '--permanent', '--query-service', svc], verbosity=CallVerbosity.DEBUG)
if ret:
logger.info('Enabling firewalld service %s in current zone...' % svc)
out, err, ret = call(self.ctx, [self.cmd, '--permanent', '--add-service', svc])
if ret:
raise RuntimeError(
'unable to add service %s to current zone: %s' % (svc, err))
else:
logger.debug('firewalld service %s is enabled in current zone' % svc)
def open_ports(self, fw_ports):
# type: (List[int]) -> None
if not self.available:
logger.debug('Not possible to open ports <%s>. firewalld.service is not available' % fw_ports)
return
if not self.cmd:
raise RuntimeError('command not defined')
for port in fw_ports:
tcp_port = str(port) + '/tcp'
out, err, ret = call(self.ctx, [self.cmd, '--permanent', '--query-port', tcp_port], verbosity=CallVerbosity.DEBUG)
if ret:
logger.info('Enabling firewalld port %s in current zone...' % tcp_port)
out, err, ret = call(self.ctx, [self.cmd, '--permanent', '--add-port', tcp_port])
if ret:
raise RuntimeError('unable to add port %s to current zone: %s' %
(tcp_port, err))
else:
logger.debug('firewalld port %s is enabled in current zone' % tcp_port)
def close_ports(self, fw_ports):
# type: (List[int]) -> None
if not self.available:
logger.debug('Not possible to close ports <%s>. firewalld.service is not available' % fw_ports)
return
if not self.cmd:
raise RuntimeError('command not defined')
for port in fw_ports:
tcp_port = str(port) + '/tcp'
out, err, ret = call(self.ctx, [self.cmd, '--permanent', '--query-port', tcp_port], verbosity=CallVerbosity.DEBUG)
if not ret:
logger.info('Disabling port %s in current zone...' % tcp_port)
out, err, ret = call(self.ctx, [self.cmd, '--permanent', '--remove-port', tcp_port])
if ret:
raise RuntimeError('unable to remove port %s from current zone: %s' %
(tcp_port, err))
else:
logger.info(f'Port {tcp_port} disabled')
else:
logger.info(f'firewalld port {tcp_port} already closed')
def apply_rules(self):
# type: () -> None
if not self.available:
return
if not self.cmd:
raise RuntimeError('command not defined')
call_throws(self.ctx, [self.cmd, '--reload'])
def update_firewalld(ctx, daemon_type):
# type: (CephadmContext, str) -> None
firewall = Firewalld(ctx)
firewall.enable_service_for(daemon_type)
firewall.apply_rules()
def install_sysctl(ctx: CephadmContext, fsid: str, daemon_type: str) -> None:
"""
Set up sysctl settings
"""
def _write(conf: Path, lines: List[str]) -> None:
lines = [
'# created by cephadm',
'',
*lines,
'',
]
with open(conf, 'w') as f:
f.write('\n'.join(lines))
conf = Path(ctx.sysctl_dir).joinpath(f'90-ceph-{fsid}-{daemon_type}.conf')
lines: Optional[List] = None
if daemon_type == 'osd':
lines = OSD.get_sysctl_settings()
elif daemon_type == 'haproxy':
lines = HAproxy.get_sysctl_settings()
elif daemon_type == 'keepalived':
lines = Keepalived.get_sysctl_settings()
# apply the sysctl settings
if lines:
Path(ctx.sysctl_dir).mkdir(mode=0o755, exist_ok=True)
_write(conf, lines)
call_throws(ctx, ['sysctl', '--system'])
def install_base_units(ctx, fsid):
# type: (CephadmContext, str) -> None
"""
Set up ceph.target and ceph-$fsid.target units.
"""
# global unit
existed = os.path.exists(ctx.unit_dir + '/ceph.target')
with open(ctx.unit_dir + '/ceph.target.new', 'w') as f:
f.write('[Unit]\n'
'Description=All Ceph clusters and services\n'
'\n'
'[Install]\n'
'WantedBy=multi-user.target\n')
os.rename(ctx.unit_dir + '/ceph.target.new',
ctx.unit_dir + '/ceph.target')
if not existed:
# we disable before enable in case a different ceph.target
# (from the traditional package) is present; while newer
# systemd is smart enough to disable the old
# (/lib/systemd/...) and enable the new (/etc/systemd/...),
# some older versions of systemd error out with EEXIST.
call_throws(ctx, ['systemctl', 'disable', 'ceph.target'])
call_throws(ctx, ['systemctl', 'enable', 'ceph.target'])
call_throws(ctx, ['systemctl', 'start', 'ceph.target'])
# cluster unit
existed = os.path.exists(ctx.unit_dir + '/ceph-%s.target' % fsid)
with open(ctx.unit_dir + '/ceph-%s.target.new' % fsid, 'w') as f:
f.write(
'[Unit]\n'
'Description=Ceph cluster {fsid}\n'
'PartOf=ceph.target\n'
'Before=ceph.target\n'
'\n'
'[Install]\n'
'WantedBy=multi-user.target ceph.target\n'.format(
fsid=fsid)
)
os.rename(ctx.unit_dir + '/ceph-%s.target.new' % fsid,
ctx.unit_dir + '/ceph-%s.target' % fsid)
if not existed:
call_throws(ctx, ['systemctl', 'enable', 'ceph-%s.target' % fsid])
call_throws(ctx, ['systemctl', 'start', 'ceph-%s.target' % fsid])
# logrotate for the cluster
with open(ctx.logrotate_dir + '/ceph-%s' % fsid, 'w') as f:
"""
This is a bit sloppy in that the killall/pkill will touch all ceph daemons
in all containers, but I don't see an elegant way to send SIGHUP *just* to
the daemons for this cluster. (1) systemd kill -s will get the signal to
podman, but podman will exit. (2) podman kill will get the signal to the
first child (bash), but that isn't the ceph daemon. This is simpler and
should be harmless.
"""
f.write("""# created by cephadm
/var/log/ceph/%s/*.log {
rotate 7
daily
compress
sharedscripts
postrotate
killall -q -1 ceph-mon ceph-mgr ceph-mds ceph-osd ceph-fuse radosgw rbd-mirror cephfs-mirror || pkill -1 -x 'ceph-mon|ceph-mgr|ceph-mds|ceph-osd|ceph-fuse|radosgw|rbd-mirror|cephfs-mirror' || true
endscript
missingok
notifempty
su root root
}
""" % fsid)
def get_unit_file(ctx, fsid):
# type: (CephadmContext, str) -> str
extra_args = ''
if isinstance(ctx.container_engine, Podman):
extra_args = ('ExecStartPre=-/bin/rm -f %t/%n-pid %t/%n-cid\n'
'ExecStopPost=-/bin/rm -f %t/%n-pid %t/%n-cid\n'
'Type=forking\n'
'PIDFile=%t/%n-pid\n')
if ctx.container_engine.version >= CGROUPS_SPLIT_PODMAN_VERSION:
extra_args += 'Delegate=yes\n'
docker = isinstance(ctx.container_engine, Docker)
u = """# generated by cephadm
[Unit]
Description=Ceph %i for {fsid}
# According to:
# http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget
# these can be removed once ceph-mon will dynamically change network
# configuration.
After=network-online.target local-fs.target time-sync.target{docker_after}
Wants=network-online.target local-fs.target time-sync.target
{docker_requires}
PartOf=ceph-{fsid}.target
Before=ceph-{fsid}.target
[Service]
LimitNOFILE=1048576
LimitNPROC=1048576
EnvironmentFile=-/etc/environment
ExecStart=/bin/bash {data_dir}/{fsid}/%i/unit.run
ExecStop=-/bin/bash -c '{container_path} stop ceph-{fsid}-%i ; bash {data_dir}/{fsid}/%i/unit.stop'
ExecStopPost=-/bin/bash {data_dir}/{fsid}/%i/unit.poststop
KillMode=none
Restart=on-failure
RestartSec=10s
TimeoutStartSec=120
TimeoutStopSec=120
StartLimitInterval=30min
StartLimitBurst=5
{extra_args}
[Install]
WantedBy=ceph-{fsid}.target
""".format(container_path=ctx.container_engine.path,
fsid=fsid,
data_dir=ctx.data_dir,
extra_args=extra_args,
# if docker, we depend on docker.service
docker_after=' docker.service' if docker else '',
docker_requires='Requires=docker.service\n' if docker else '')
return u
##################################
class CephContainer:
def __init__(self,
ctx: CephadmContext,
image: str,
entrypoint: str,
args: List[str] = [],
volume_mounts: Dict[str, str] = {},
cname: str = '',
container_args: List[str] = [],
envs: Optional[List[str]] = None,
privileged: bool = False,
ptrace: bool = False,
bind_mounts: Optional[List[List[str]]] = None,
init: Optional[bool] = None,
host_network: bool = True,
memory_request: Optional[str] = None,
memory_limit: Optional[str] = None,
) -> None:
self.ctx = ctx
self.image = image
self.entrypoint = entrypoint
self.args = args
self.volume_mounts = volume_mounts
self._cname = cname
self.container_args = container_args
self.envs = envs
self.privileged = privileged
self.ptrace = ptrace
self.bind_mounts = bind_mounts if bind_mounts else []
self.init = init if init else ctx.container_init
self.host_network = host_network
self.memory_request = memory_request
self.memory_limit = memory_limit
@classmethod
def for_daemon(cls,
ctx: CephadmContext,
fsid: str,
daemon_type: str,
daemon_id: str,
entrypoint: str,
args: List[str] = [],
volume_mounts: Dict[str, str] = {},
container_args: List[str] = [],
envs: Optional[List[str]] = None,
privileged: bool = False,
ptrace: bool = False,
bind_mounts: Optional[List[List[str]]] = None,
init: Optional[bool] = None,
host_network: bool = True,
memory_request: Optional[str] = None,
memory_limit: Optional[str] = None,
) -> 'CephContainer':
return cls(
ctx,
image=ctx.image,
entrypoint=entrypoint,
args=args,
volume_mounts=volume_mounts,
cname='ceph-%s-%s.%s' % (fsid, daemon_type, daemon_id),
container_args=container_args,
envs=envs,
privileged=privileged,
ptrace=ptrace,
bind_mounts=bind_mounts,
init=init,
host_network=host_network,
memory_request=memory_request,
memory_limit=memory_limit,
)
@property
def cname(self) -> str:
"""
podman adds the current container name to the /etc/hosts
file. Turns out, python's `socket.getfqdn()` differs from
`hostname -f`, when we have the container names containing
dots in it.:
# podman run --name foo.bar.baz.com ceph/ceph /bin/bash
[root@sebastians-laptop /]# cat /etc/hosts
127.0.0.1 localhost
::1 localhost
127.0.1.1 sebastians-laptop foo.bar.baz.com
[root@sebastians-laptop /]# hostname -f
sebastians-laptop
[root@sebastians-laptop /]# python3 -c 'import socket; print(socket.getfqdn())'
foo.bar.baz.com
Fascinatingly, this doesn't happen when using dashes.
"""
return self._cname.replace('.', '-')
@cname.setter
def cname(self, val: str) -> None:
self._cname = val
@property
def old_cname(self) -> str:
return self._cname
def run_cmd(self) -> List[str]:
cmd_args: List[str] = [
str(self.ctx.container_engine.path),
'run',
'--rm',
'--ipc=host',
# some containers (ahem, haproxy) override this, but we want a fast
# shutdown always (and, more importantly, a successful exit even if we
# fall back to SIGKILL).
'--stop-signal=SIGTERM',
]
if isinstance(self.ctx.container_engine, Podman):
if os.path.exists('/etc/ceph/podman-auth.json'):
cmd_args.append('--authfile=/etc/ceph/podman-auth.json')
envs: List[str] = [
'-e', 'CONTAINER_IMAGE=%s' % self.image,
'-e', 'NODE_NAME=%s' % get_hostname(),
]
vols: List[str] = []
binds: List[str] = []
if self.memory_request:
cmd_args.extend(['-e', 'POD_MEMORY_REQUEST', str(self.memory_request)])
if self.memory_limit:
cmd_args.extend(['-e', 'POD_MEMORY_LIMIT', str(self.memory_limit)])
cmd_args.extend(['--memory', str(self.memory_limit)])
if self.host_network:
cmd_args.append('--net=host')
if self.entrypoint:
cmd_args.extend(['--entrypoint', self.entrypoint])
if self.privileged:
cmd_args.extend([
'--privileged',
# let OSD etc read block devs that haven't been chowned
'--group-add=disk'])
if self.ptrace and not self.privileged:
# if privileged, the SYS_PTRACE cap is already added
# in addition, --cap-add and --privileged are mutually
# exclusive since podman >= 2.0
cmd_args.append('--cap-add=SYS_PTRACE')
if self.init:
cmd_args.append('--init')
envs += ['-e', 'CEPH_USE_RANDOM_NONCE=1']
if self.cname:
cmd_args.extend(['--name', self.cname])
if self.envs:
for env in self.envs:
envs.extend(['-e', env])
vols = sum(
[['-v', '%s:%s' % (host_dir, container_dir)]
for host_dir, container_dir in self.volume_mounts.items()], [])
binds = sum([['--mount', '{}'.format(','.join(bind))]
for bind in self.bind_mounts], [])
return \
cmd_args + self.container_args + \
envs + vols + binds + \
[self.image] + self.args # type: ignore
def shell_cmd(self, cmd: List[str]) -> List[str]:
cmd_args: List[str] = [
str(self.ctx.container_engine.path),
'run',
'--rm',
'--ipc=host',
]
envs: List[str] = [
'-e', 'CONTAINER_IMAGE=%s' % self.image,
'-e', 'NODE_NAME=%s' % get_hostname(),
]
vols: List[str] = []
binds: List[str] = []
if self.host_network:
cmd_args.append('--net=host')
if self.ctx.no_hosts:
cmd_args.append('--no-hosts')
if self.privileged:
cmd_args.extend([
'--privileged',
# let OSD etc read block devs that haven't been chowned
'--group-add=disk',
])
if self.init:
cmd_args.append('--init')
envs += ['-e', 'CEPH_USE_RANDOM_NONCE=1']
if self.envs:
for env in self.envs:
envs.extend(['-e', env])
vols = sum(
[['-v', '%s:%s' % (host_dir, container_dir)]
for host_dir, container_dir in self.volume_mounts.items()], [])
binds = sum([['--mount', '{}'.format(','.join(bind))]
for bind in self.bind_mounts], [])
return cmd_args + self.container_args + envs + vols + binds + [
'--entrypoint', cmd[0],
self.image,
] + cmd[1:]
def exec_cmd(self, cmd):
# type: (List[str]) -> List[str]
cname = get_running_container_name(self.ctx, self)
if not cname:
raise Error('unable to find container "{}"'.format(self.cname))
return [
str(self.ctx.container_engine.path),
'exec',
] + self.container_args + [
self.cname,
] + cmd
def rm_cmd(self, old_cname: bool = False, storage: bool = False) -> List[str]:
ret = [
str(self.ctx.container_engine.path),
'rm', '-f',
]
if storage:
ret.append('--storage')
if old_cname:
ret.append(self.old_cname)
else:
ret.append(self.cname)
return ret
def stop_cmd(self, old_cname: bool = False) -> List[str]:
ret = [
str(self.ctx.container_engine.path),
'stop', self.old_cname if old_cname else self.cname,
]
return ret
def run(self, timeout=DEFAULT_TIMEOUT):
# type: (Optional[int]) -> str
out, _, _ = call_throws(self.ctx, self.run_cmd(),
desc=self.entrypoint, timeout=timeout)
return out
#####################################
class MgrListener(Thread):
def __init__(self, agent: 'CephadmAgent') -> None:
self.agent = agent
self.stop = False
super(MgrListener, self).__init__(target=self.run)
def run(self) -> None:
listenSocket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
listenSocket.bind(('0.0.0.0', int(self.agent.listener_port)))
listenSocket.settimeout(60)
listenSocket.listen(1)
ssl_ctx = ssl.create_default_context(ssl.Purpose.CLIENT_AUTH)
ssl_ctx.verify_mode = ssl.CERT_REQUIRED
ssl_ctx.load_cert_chain(self.agent.listener_cert_path, self.agent.listener_key_path)
ssl_ctx.load_verify_locations(self.agent.ca_path)
secureListenSocket = ssl_ctx.wrap_socket(listenSocket, server_side=True)
while not self.stop:
try:
try:
conn, _ = secureListenSocket.accept()
except socket.timeout:
continue
try:
length: int = int(conn.recv(10).decode())
except Exception as e:
err_str = f'Failed to extract length of payload from message: {e}'
conn.send(err_str.encode())
logger.error(err_str)
while True:
payload = conn.recv(length).decode()
if not payload:
break
try:
data: Dict[Any, Any] = json.loads(payload)
self.handle_json_payload(data)
except Exception as e:
err_str = f'Failed to extract json payload from message: {e}'
conn.send(err_str.encode())
logger.error(err_str)
else:
conn.send(b'ACK')
if 'config' in data:
self.agent.wakeup()
self.agent.ls_gatherer.wakeup()
self.agent.volume_gatherer.wakeup()
logger.debug(f'Got mgr message {data}')
except Exception as e:
logger.error(f'Mgr Listener encountered exception: {e}')
def shutdown(self) -> None:
self.stop = True
def handle_json_payload(self, data: Dict[Any, Any]) -> None:
self.agent.ack = int(data['counter'])
if 'config' in data:
logger.info('Received new config from mgr')
config = data['config']
for filename in config:
if filename in self.agent.required_files:
file_path = os.path.join(self.agent.daemon_dir, filename)
with open(os.open(file_path + '.new', os.O_CREAT | os.O_WRONLY, 0o600), 'w') as f:
f.write(config[filename])
os.rename(file_path + '.new', file_path)
self.agent.pull_conf_settings()
self.agent.wakeup()
class CephadmAgent():
daemon_type = 'agent'
default_port = 8498
loop_interval = 30
stop = False
required_files = [
'agent.json',
'keyring',
'root_cert.pem',
'listener.crt',
'listener.key',
]
def __init__(self, ctx: CephadmContext, fsid: str, daemon_id: Union[int, str] = ''):
self.ctx = ctx
self.fsid = fsid
self.daemon_id = daemon_id
self.starting_port = 14873
self.target_ip = ''
self.target_port = ''
self.host = ''
self.daemon_dir = os.path.join(ctx.data_dir, self.fsid, f'{self.daemon_type}.{self.daemon_id}')
self.config_path = os.path.join(self.daemon_dir, 'agent.json')
self.keyring_path = os.path.join(self.daemon_dir, 'keyring')
self.ca_path = os.path.join(self.daemon_dir, 'root_cert.pem')
self.listener_cert_path = os.path.join(self.daemon_dir, 'listener.crt')
self.listener_key_path = os.path.join(self.daemon_dir, 'listener.key')
self.listener_port = ''
self.ack = 1
self.event = Event()
self.mgr_listener = MgrListener(self)
self.ls_gatherer = AgentGatherer(self, lambda: self._get_ls(), 'Ls')
self.volume_gatherer = AgentGatherer(self, lambda: self._ceph_volume(enhanced=False), 'Volume')
self.device_enhanced_scan = False
self.recent_iteration_run_times: List[float] = [0.0, 0.0, 0.0]
self.recent_iteration_index: int = 0
self.cached_ls_values: Dict[str, Dict[str, str]] = {}
def validate(self, config: Dict[str, str] = {}) -> None:
# check for the required files
for fname in self.required_files:
if fname not in config:
raise Error('required file missing from config: %s' % fname)
def deploy_daemon_unit(self, config: Dict[str, str] = {}) -> None:
if not config:
raise Error('Agent needs a config')
assert isinstance(config, dict)
self.validate(config)
# Create the required config files in the daemons dir, with restricted permissions
for filename in config:
if filename in self.required_files:
file_path = os.path.join(self.daemon_dir, filename)
with open(os.open(file_path + '.new', os.O_CREAT | os.O_WRONLY, 0o600), 'w') as f:
f.write(config[filename])
os.rename(file_path + '.new', file_path)
unit_run_path = os.path.join(self.daemon_dir, 'unit.run')
with open(os.open(unit_run_path + '.new', os.O_CREAT | os.O_WRONLY, 0o600), 'w') as f:
f.write(self.unit_run())
os.rename(unit_run_path + '.new', unit_run_path)
meta: Dict[str, Any] = {}
meta_file_path = os.path.join(self.daemon_dir, 'unit.meta')
if 'meta_json' in self.ctx and self.ctx.meta_json:
meta = json.loads(self.ctx.meta_json) or {}
with open(os.open(meta_file_path + '.new', os.O_CREAT | os.O_WRONLY, 0o600), 'w') as f:
f.write(json.dumps(meta, indent=4) + '\n')
os.rename(meta_file_path + '.new', meta_file_path)
unit_file_path = os.path.join(self.ctx.unit_dir, self.unit_name())
with open(os.open(unit_file_path + '.new', os.O_CREAT | os.O_WRONLY, 0o600), 'w') as f:
f.write(self.unit_file())
os.rename(unit_file_path + '.new', unit_file_path)
call_throws(self.ctx, ['systemctl', 'daemon-reload'])
call(self.ctx, ['systemctl', 'stop', self.unit_name()],
verbosity=CallVerbosity.DEBUG)
call(self.ctx, ['systemctl', 'reset-failed', self.unit_name()],
verbosity=CallVerbosity.DEBUG)
call_throws(self.ctx, ['systemctl', 'enable', '--now', self.unit_name()])
def unit_name(self) -> str:
return '{}.service'.format(get_unit_name(self.fsid, self.daemon_type, self.daemon_id))
def unit_run(self) -> str:
py3 = shutil.which('python3')
binary_path = os.path.realpath(sys.argv[0])
return ('set -e\n' + f'{py3} {binary_path} agent --fsid {self.fsid} --daemon-id {self.daemon_id} &\n')
def unit_file(self) -> str:
return """#generated by cephadm
[Unit]
Description=cephadm agent for cluster {fsid}
PartOf=ceph-{fsid}.target
Before=ceph-{fsid}.target
[Service]
Type=forking
ExecStart=/bin/bash {data_dir}/unit.run
Restart=on-failure
RestartSec=10s
[Install]
WantedBy=ceph-{fsid}.target
""".format(
fsid=self.fsid,
data_dir=self.daemon_dir
)
def shutdown(self) -> None:
self.stop = True
if self.mgr_listener.is_alive():
self.mgr_listener.shutdown()
def wakeup(self) -> None:
self.event.set()
def pull_conf_settings(self) -> None:
try:
with open(self.config_path, 'r') as f:
config = json.load(f)
self.target_ip = config['target_ip']
self.target_port = config['target_port']
self.loop_interval = int(config['refresh_period'])
self.starting_port = int(config['listener_port'])
self.host = config['host']
use_lsm = config['device_enhanced_scan']
except Exception as e:
self.shutdown()
raise Error(f'Failed to get agent target ip and port from config: {e}')
try:
with open(self.keyring_path, 'r') as f:
self.keyring = f.read()
except Exception as e:
self.shutdown()
raise Error(f'Failed to get agent keyring: {e}')
assert self.target_ip and self.target_port
self.device_enhanced_scan = False
if use_lsm.lower() == 'true':
self.device_enhanced_scan = True
self.volume_gatherer.update_func(lambda: self._ceph_volume(enhanced=self.device_enhanced_scan))
def run(self) -> None:
self.pull_conf_settings()
try:
for _ in range(1001):
if not port_in_use(self.ctx, self.starting_port):
self.listener_port = str(self.starting_port)
break
self.starting_port += 1
if not self.listener_port:
raise Error(f'All 1000 ports starting at {str(self.starting_port - 1001)} taken.')
except Exception as e:
raise Error(f'Failed to pick port for agent to listen on: {e}')
if not self.mgr_listener.is_alive():
self.mgr_listener.start()
if not self.ls_gatherer.is_alive():
self.ls_gatherer.start()
if not self.volume_gatherer.is_alive():
self.volume_gatherer.start()
ssl_ctx = ssl.create_default_context()
ssl_ctx.check_hostname = True
ssl_ctx.verify_mode = ssl.CERT_REQUIRED
ssl_ctx.load_verify_locations(self.ca_path)
while not self.stop:
start_time = time.monotonic()
ack = self.ack
# part of the networks info is returned as a set which is not JSON
# serializable. The set must be converted to a list
networks = list_networks(self.ctx)
networks_list = {}
for key in networks.keys():
for k, v in networks[key].items():
networks_list[key] = {k: list(v)}
data = json.dumps({'host': self.host,
'ls': (self.ls_gatherer.data if self.ack == self.ls_gatherer.ack
and self.ls_gatherer.data is not None else []),
'networks': networks_list,
'facts': HostFacts(self.ctx).dump(),
'volume': (self.volume_gatherer.data if self.ack == self.volume_gatherer.ack
and self.volume_gatherer.data is not None else ''),
'ack': str(ack),
'keyring': self.keyring,
'port': self.listener_port})
data = data.encode('ascii')
url = f'https://{self.target_ip}:{self.target_port}/data'
try:
req = Request(url, data, {'Content-Type': 'application/json'})
send_time = time.monotonic()
with urlopen(req, context=ssl_ctx) as response:
response_str = response.read()
response_json = json.loads(response_str)
total_request_time = datetime.timedelta(seconds=(time.monotonic() - send_time)).total_seconds()
logger.info(f'Received mgr response: "{response_json["result"]}" {total_request_time} seconds after sending request.')
except Exception as e:
logger.error(f'Failed to send metadata to mgr: {e}')
end_time = time.monotonic()
run_time = datetime.timedelta(seconds=(end_time - start_time))
self.recent_iteration_run_times[self.recent_iteration_index] = run_time.total_seconds()
self.recent_iteration_index = (self.recent_iteration_index + 1) % 3
run_time_average = sum(self.recent_iteration_run_times, 0.0) / len([t for t in self.recent_iteration_run_times if t])
self.event.wait(max(self.loop_interval - int(run_time_average), 0))
self.event.clear()
def _ceph_volume(self, enhanced: bool = False) -> Tuple[str, bool]:
self.ctx.command = 'inventory --format=json'.split()
if enhanced:
self.ctx.command.append('--with-lsm')
self.ctx.fsid = self.fsid
stream = io.StringIO()
with redirect_stdout(stream):
command_ceph_volume(self.ctx)
stdout = stream.getvalue()
if stdout:
return (stdout, False)
else:
raise Exception('ceph-volume returned empty value')
def _daemon_ls_subset(self) -> Dict[str, Dict[str, Any]]:
# gets a subset of ls info quickly. The results of this will tell us if our
# cached info is still good or if we need to run the full ls again.
# for legacy containers, we just grab the full info. For cephadmv1 containers,
# we only grab enabled, state, mem_usage and container id. If container id has
# not changed for any daemon, we assume our cached info is good.
daemons: Dict[str, Dict[str, Any]] = {}
data_dir = self.ctx.data_dir
seen_memusage = {} # type: Dict[str, int]
out, err, code = call(
self.ctx,
[self.ctx.container_engine.path, 'stats', '--format', '{{.ID}},{{.MemUsage}}', '--no-stream'],
verbosity=CallVerbosity.DEBUG
)
seen_memusage_cid_len, seen_memusage = _parse_mem_usage(code, out)
# we need a mapping from container names to ids. Later we will convert daemon
# names to container names to get daemons container id to see if it has changed
out, err, code = call(
self.ctx,
[self.ctx.container_engine.path, 'ps', '--format', '{{.ID}},{{.Names}}', '--no-trunc'],
verbosity=CallVerbosity.DEBUG
)
name_id_mapping: Dict[str, str] = self._parse_container_id_name(code, out)
for i in os.listdir(data_dir):
if i in ['mon', 'osd', 'mds', 'mgr']:
daemon_type = i
for j in os.listdir(os.path.join(data_dir, i)):
if '-' not in j:
continue
(cluster, daemon_id) = j.split('-', 1)
legacy_unit_name = 'ceph-%s@%s' % (daemon_type, daemon_id)
(enabled, state, _) = check_unit(self.ctx, legacy_unit_name)
daemons[f'{daemon_type}.{daemon_id}'] = {
'style': 'legacy',
'name': '%s.%s' % (daemon_type, daemon_id),
'fsid': self.ctx.fsid if self.ctx.fsid is not None else 'unknown',
'systemd_unit': legacy_unit_name,
'enabled': 'true' if enabled else 'false',
'state': state,
}
elif is_fsid(i):
fsid = str(i) # convince mypy that fsid is a str here
for j in os.listdir(os.path.join(data_dir, i)):
if '.' in j and os.path.isdir(os.path.join(data_dir, fsid, j)):
(daemon_type, daemon_id) = j.split('.', 1)
unit_name = get_unit_name(fsid, daemon_type, daemon_id)
(enabled, state, _) = check_unit(self.ctx, unit_name)
daemons[j] = {
'style': 'cephadm:v1',
'systemd_unit': unit_name,
'enabled': 'true' if enabled else 'false',
'state': state,
}
c = CephContainer.for_daemon(self.ctx, self.ctx.fsid, daemon_type, daemon_id, 'bash')
container_id: Optional[str] = None
for name in (c.cname, c.old_cname):
if name in name_id_mapping:
container_id = name_id_mapping[name]
break
daemons[j]['container_id'] = container_id
if container_id:
daemons[j]['memory_usage'] = seen_memusage.get(container_id[0:seen_memusage_cid_len])
return daemons
def _parse_container_id_name(self, code: int, out: str) -> Dict[str, str]:
# map container names to ids from ps output
name_id_mapping = {} # type: Dict[str, str]
if not code:
for line in out.splitlines():
id, name = line.split(',')
name_id_mapping[name] = id
return name_id_mapping
def _get_ls(self) -> Tuple[List[Dict[str, str]], bool]:
if not self.cached_ls_values:
logger.info('No cached ls output. Running full daemon ls')
ls = list_daemons(self.ctx)
for d in ls:
self.cached_ls_values[d['name']] = d
return (ls, True)
else:
ls_subset = self._daemon_ls_subset()
need_full_ls = False
state_change = False
if set(self.cached_ls_values.keys()) != set(ls_subset.keys()):
# case for a new daemon in ls or an old daemon no longer appearing.
# If that happens we need a full ls
logger.info('Change detected in state of daemons. Running full daemon ls')
ls = list_daemons(self.ctx)
for d in ls:
self.cached_ls_values[d['name']] = d
return (ls, True)
for daemon, info in self.cached_ls_values.items():
if info['style'] == 'legacy':
# for legacy containers, ls_subset just grabs all the info
self.cached_ls_values[daemon] = ls_subset[daemon]
else:
if info['container_id'] != ls_subset[daemon]['container_id']:
# case for container id having changed. We need full ls as
# info we didn't grab like version and start time could have changed
need_full_ls = True
break
# want to know if a daemons state change because in those cases we want
# to report back quicker
if (
self.cached_ls_values[daemon]['enabled'] != ls_subset[daemon]['enabled']
or self.cached_ls_values[daemon]['state'] != ls_subset[daemon]['state']
):
state_change = True
# if we reach here, container id matched. Update the few values we do track
# from ls subset: state, enabled, memory_usage.
self.cached_ls_values[daemon]['enabled'] = ls_subset[daemon]['enabled']
self.cached_ls_values[daemon]['state'] = ls_subset[daemon]['state']
if 'memory_usage' in ls_subset[daemon]:
self.cached_ls_values[daemon]['memory_usage'] = ls_subset[daemon]['memory_usage']
if need_full_ls:
logger.info('Change detected in state of daemons. Running full daemon ls')
ls = list_daemons(self.ctx)
for d in ls:
self.cached_ls_values[d['name']] = d
return (ls, True)
else:
ls = [info for daemon, info in self.cached_ls_values.items()]
return (ls, state_change)
class AgentGatherer(Thread):
def __init__(self, agent: 'CephadmAgent', func: Callable, gatherer_type: str = 'Unnamed', initial_ack: int = 0) -> None:
self.agent = agent
self.func = func
self.gatherer_type = gatherer_type
self.ack = initial_ack
self.event = Event()
self.data: Any = None
self.stop = False
self.recent_iteration_run_times: List[float] = [0.0, 0.0, 0.0]
self.recent_iteration_index: int = 0
super(AgentGatherer, self).__init__(target=self.run)
def run(self) -> None:
while not self.stop:
try:
start_time = time.monotonic()
ack = self.agent.ack
change = False
try:
self.data, change = self.func()
except Exception as e:
logger.error(f'{self.gatherer_type} Gatherer encountered exception gathering data: {e}')
self.data = None
if ack != self.ack or change:
self.ack = ack
self.agent.wakeup()
end_time = time.monotonic()
run_time = datetime.timedelta(seconds=(end_time - start_time))
self.recent_iteration_run_times[self.recent_iteration_index] = run_time.total_seconds()
self.recent_iteration_index = (self.recent_iteration_index + 1) % 3
run_time_average = sum(self.recent_iteration_run_times, 0.0) / len([t for t in self.recent_iteration_run_times if t])
self.event.wait(max(self.agent.loop_interval - int(run_time_average), 0))
self.event.clear()
except Exception as e:
logger.error(f'{self.gatherer_type} Gatherer encountered exception: {e}')
def shutdown(self) -> None:
self.stop = True
def wakeup(self) -> None:
self.event.set()
def update_func(self, func: Callable) -> None:
self.func = func
def command_agent(ctx: CephadmContext) -> None:
agent = CephadmAgent(ctx, ctx.fsid, ctx.daemon_id)
if not os.path.isdir(agent.daemon_dir):
raise Error(f'Agent daemon directory {agent.daemon_dir} does not exist. Perhaps agent was never deployed?')
agent.run()
##################################
@infer_image
def command_version(ctx):
# type: (CephadmContext) -> int
c = CephContainer(ctx, ctx.image, 'ceph', ['--version'])
out, err, ret = call(ctx, c.run_cmd(), desc=c.entrypoint)
if not ret:
print(out.strip())
return ret
##################################
@infer_image
def command_pull(ctx):
# type: (CephadmContext) -> int
_pull_image(ctx, ctx.image, ctx.insecure)
return command_inspect_image(ctx)
def _pull_image(ctx, image, insecure=False):
# type: (CephadmContext, str, bool) -> None
logger.info('Pulling container image %s...' % image)
ignorelist = [
'error creating read-write layer with ID',
'net/http: TLS handshake timeout',
'Digest did not match, expected',
]
cmd = [ctx.container_engine.path, 'pull', image]
if isinstance(ctx.container_engine, Podman):
if insecure:
cmd.append('--tls-verify=false')
if os.path.exists('/etc/ceph/podman-auth.json'):
cmd.append('--authfile=/etc/ceph/podman-auth.json')
cmd_str = ' '.join(cmd)
for sleep_secs in [1, 4, 25]:
out, err, ret = call(ctx, cmd)
if not ret:
return
if not any(pattern in err for pattern in ignorelist):
raise Error('Failed command: %s' % cmd_str)
logger.info('`%s` failed transiently. Retrying. waiting %s seconds...' % (cmd_str, sleep_secs))
time.sleep(sleep_secs)
raise Error('Failed command: %s: maximum retries reached' % cmd_str)
##################################
@infer_image
def command_inspect_image(ctx):
# type: (CephadmContext) -> int
out, err, ret = call_throws(ctx, [
ctx.container_engine.path, 'inspect',
'--format', '{{.ID}},{{.RepoDigests}}',
ctx.image])
if ret:
return errno.ENOENT
info_from = get_image_info_from_inspect(out.strip(), ctx.image)
ver = CephContainer(ctx, ctx.image, 'ceph', ['--version']).run().strip()
info_from['ceph_version'] = ver
print(json.dumps(info_from, indent=4, sort_keys=True))
return 0
def normalize_image_digest(digest: str) -> str:
"""
Normal case:
>>> normalize_image_digest('ceph/ceph', 'docker.io')
'docker.io/ceph/ceph'
No change:
>>> normalize_image_digest('quay.ceph.io/ceph/ceph', 'docker.io')
'quay.ceph.io/ceph/ceph'
>>> normalize_image_digest('docker.io/ubuntu', 'docker.io')
'docker.io/ubuntu'
>>> normalize_image_digest('localhost/ceph', 'docker.io')
'localhost/ceph'
"""
known_shortnames = [
'ceph/ceph',
'ceph/daemon',
'ceph/daemon-base',
]
for image in known_shortnames:
if digest.startswith(image):
return f'{DEFAULT_REGISTRY}/{digest}'
return digest
def get_image_info_from_inspect(out, image):
# type: (str, str) -> Dict[str, Union[str,List[str]]]
image_id, digests = out.split(',', 1)
if not out:
raise Error('inspect {}: empty result'.format(image))
r = {
'image_id': normalize_container_id(image_id)
} # type: Dict[str, Union[str,List[str]]]
if digests:
r['repo_digests'] = list(map(normalize_image_digest, digests[1: -1].split(' ')))
return r
##################################
def check_subnet(subnets: str) -> Tuple[int, List[int], str]:
"""Determine whether the given string is a valid subnet
:param subnets: subnet string, a single definition or comma separated list of CIDR subnets
:returns: return code, IP version list of the subnets and msg describing any errors validation errors
"""
rc = 0
versions = set()
errors = []
subnet_list = subnets.split(',')
for subnet in subnet_list:
# ensure the format of the string is as expected address/netmask
if not re.search(r'\/\d+$', subnet):
rc = 1
errors.append(f'{subnet} is not in CIDR format (address/netmask)')
continue
try:
v = ipaddress.ip_network(subnet).version
versions.add(v)
except ValueError as e:
rc = 1
errors.append(f'{subnet} invalid: {str(e)}')
return rc, list(versions), ', '.join(errors)
def unwrap_ipv6(address):
# type: (str) -> str
if address.startswith('[') and address.endswith(']'):
return address[1: -1]
return address
def wrap_ipv6(address):
# type: (str) -> str
# We cannot assume it's already wrapped or even an IPv6 address if
# it's already wrapped it'll not pass (like if it's a hostname) and trigger
# the ValueError
try:
if ipaddress.ip_address(address).version == 6:
return f'[{address}]'
except ValueError:
pass
return address
def is_ipv6(address):
# type: (str) -> bool
address = unwrap_ipv6(address)
try:
return ipaddress.ip_address(address).version == 6
except ValueError:
logger.warning('Address: {} is not a valid IP address'.format(address))
return False
def prepare_mon_addresses(
ctx: CephadmContext
) -> Tuple[str, bool, Optional[str]]:
r = re.compile(r':(\d+)$')
base_ip = ''
ipv6 = False
if ctx.mon_ip:
ipv6 = is_ipv6(ctx.mon_ip)
if ipv6:
ctx.mon_ip = wrap_ipv6(ctx.mon_ip)
hasport = r.findall(ctx.mon_ip)
if hasport:
port_str = hasport[0]
port = int(port_str)
if port == 6789:
addr_arg = '[v1:%s]' % ctx.mon_ip
elif port == 3300:
addr_arg = '[v2:%s]' % ctx.mon_ip
else:
logger.warning('Using msgr2 protocol for unrecognized port %d' %
port)
addr_arg = '[v2:%s]' % ctx.mon_ip
base_ip = ctx.mon_ip[0:-(len(port_str)) - 1]
check_ip_port(ctx, base_ip, port)
else:
base_ip = ctx.mon_ip
addr_arg = '[v2:%s:3300,v1:%s:6789]' % (ctx.mon_ip, ctx.mon_ip)
check_ip_port(ctx, ctx.mon_ip, 3300)
check_ip_port(ctx, ctx.mon_ip, 6789)
elif ctx.mon_addrv:
addr_arg = ctx.mon_addrv
if addr_arg[0] != '[' or addr_arg[-1] != ']':
raise Error('--mon-addrv value %s must use square backets' %
addr_arg)
ipv6 = addr_arg.count('[') > 1
for addr in addr_arg[1: -1].split(','):
hasport = r.findall(addr)
if not hasport:
raise Error('--mon-addrv value %s must include port number' %
addr_arg)
port_str = hasport[0]
port = int(port_str)
# strip off v1: or v2: prefix
addr = re.sub(r'^v\d+:', '', addr)
base_ip = addr[0:-(len(port_str)) - 1]
check_ip_port(ctx, base_ip, port)
else:
raise Error('must specify --mon-ip or --mon-addrv')
logger.debug('Base mon IP is %s, final addrv is %s' % (base_ip, addr_arg))
mon_network = None
if not ctx.skip_mon_network:
# make sure IP is configured locally, and then figure out the
# CIDR network
errmsg = f'Cannot infer CIDR network for mon IP `{base_ip}`'
for net, ifaces in list_networks(ctx).items():
ips: List[str] = []
for iface, ls in ifaces.items():
ips.extend(ls)
try:
if ipaddress.ip_address(unwrap_ipv6(base_ip)) in \
[ipaddress.ip_address(ip) for ip in ips]:
mon_network = net
logger.info(f'Mon IP `{base_ip}` is in CIDR network `{mon_network}`')
break
except ValueError as e:
logger.warning(f'{errmsg}: {e}')
if not mon_network:
raise Error(f'{errmsg}: pass --skip-mon-network to configure it later')
return (addr_arg, ipv6, mon_network)
def prepare_cluster_network(ctx: CephadmContext) -> Tuple[str, bool]:
cluster_network = ''
ipv6_cluster_network = False
# the cluster network may not exist on this node, so all we can do is
# validate that the address given is valid ipv4 or ipv6 subnet
if ctx.cluster_network:
rc, versions, err_msg = check_subnet(ctx.cluster_network)
if rc:
raise Error(f'Invalid --cluster-network parameter: {err_msg}')
cluster_network = ctx.cluster_network
ipv6_cluster_network = True if 6 in versions else False
else:
logger.info('- internal network (--cluster-network) has not '
'been provided, OSD replication will default to '
'the public_network')
return cluster_network, ipv6_cluster_network
def create_initial_keys(
ctx: CephadmContext,
uid: int, gid: int,
mgr_id: str
) -> Tuple[str, str, str, Any, Any]: # type: ignore
_image = ctx.image
# create some initial keys
logger.info('Creating initial keys...')
mon_key = CephContainer(
ctx,
image=_image,
entrypoint='/usr/bin/ceph-authtool',
args=['--gen-print-key'],
).run().strip()
admin_key = CephContainer(
ctx,
image=_image,
entrypoint='/usr/bin/ceph-authtool',
args=['--gen-print-key'],
).run().strip()
mgr_key = CephContainer(
ctx,
image=_image,
entrypoint='/usr/bin/ceph-authtool',
args=['--gen-print-key'],
).run().strip()
keyring = ('[mon.]\n'
'\tkey = %s\n'
'\tcaps mon = allow *\n'
'[client.admin]\n'
'\tkey = %s\n'
'\tcaps mon = allow *\n'
'\tcaps mds = allow *\n'
'\tcaps mgr = allow *\n'
'\tcaps osd = allow *\n'
'[mgr.%s]\n'
'\tkey = %s\n'
'\tcaps mon = profile mgr\n'
'\tcaps mds = allow *\n'
'\tcaps osd = allow *\n'
% (mon_key, admin_key, mgr_id, mgr_key))
admin_keyring = write_tmp('[client.admin]\n'
'\tkey = ' + admin_key + '\n',
uid, gid)
# tmp keyring file
bootstrap_keyring = write_tmp(keyring, uid, gid)
return (mon_key, mgr_key, admin_key,
bootstrap_keyring, admin_keyring)
def create_initial_monmap(
ctx: CephadmContext,
uid: int, gid: int,
fsid: str,
mon_id: str, mon_addr: str
) -> Any:
logger.info('Creating initial monmap...')
monmap = write_tmp('', 0, 0)
out = CephContainer(
ctx,
image=ctx.image,
entrypoint='/usr/bin/monmaptool',
args=[
'--create',
'--clobber',
'--fsid', fsid,
'--addv', mon_id, mon_addr,
'/tmp/monmap'
],
volume_mounts={
monmap.name: '/tmp/monmap:z',
},
).run()
logger.debug(f'monmaptool for {mon_id} {mon_addr} on {out}')
# pass monmap file to ceph user for use by ceph-mon --mkfs below
os.fchown(monmap.fileno(), uid, gid)
return monmap
def prepare_create_mon(
ctx: CephadmContext,
uid: int, gid: int,
fsid: str, mon_id: str,
bootstrap_keyring_path: str,
monmap_path: str
) -> Tuple[str, str]:
logger.info('Creating mon...')
create_daemon_dirs(ctx, fsid, 'mon', mon_id, uid, gid)
mon_dir = get_data_dir(fsid, ctx.data_dir, 'mon', mon_id)
log_dir = get_log_dir(fsid, ctx.log_dir)
out = CephContainer(
ctx,
image=ctx.image,
entrypoint='/usr/bin/ceph-mon',
args=[
'--mkfs',
'-i', mon_id,
'--fsid', fsid,
'-c', '/dev/null',
'--monmap', '/tmp/monmap',
'--keyring', '/tmp/keyring',
] + get_daemon_args(ctx, fsid, 'mon', mon_id),
volume_mounts={
log_dir: '/var/log/ceph:z',
mon_dir: '/var/lib/ceph/mon/ceph-%s:z' % (mon_id),
bootstrap_keyring_path: '/tmp/keyring:z',
monmap_path: '/tmp/monmap:z',
},
).run()
logger.debug(f'create mon.{mon_id} on {out}')
return (mon_dir, log_dir)
def create_mon(
ctx: CephadmContext,
uid: int, gid: int,
fsid: str, mon_id: str
) -> None:
mon_c = get_container(ctx, fsid, 'mon', mon_id)
ctx.meta_json = json.dumps({'service_name': 'mon'})
deploy_daemon(ctx, fsid, 'mon', mon_id, mon_c, uid, gid,
config=None, keyring=None)
def wait_for_mon(
ctx: CephadmContext,
mon_id: str, mon_dir: str,
admin_keyring_path: str, config_path: str
) -> None:
logger.info('Waiting for mon to start...')
c = CephContainer(
ctx,
image=ctx.image,
entrypoint='/usr/bin/ceph',
args=[
'status'],
volume_mounts={
mon_dir: '/var/lib/ceph/mon/ceph-%s:z' % (mon_id),
admin_keyring_path: '/etc/ceph/ceph.client.admin.keyring:z',
config_path: '/etc/ceph/ceph.conf:z',
},
)
# wait for the service to become available
def is_mon_available():
# type: () -> bool
timeout = ctx.timeout if ctx.timeout else 60 # seconds
out, err, ret = call(ctx, c.run_cmd(),
desc=c.entrypoint,
timeout=timeout)
return ret == 0
is_available(ctx, 'mon', is_mon_available)
def create_mgr(
ctx: CephadmContext,
uid: int, gid: int,
fsid: str, mgr_id: str, mgr_key: str,
config: str, clifunc: Callable
) -> None:
logger.info('Creating mgr...')
mgr_keyring = '[mgr.%s]\n\tkey = %s\n' % (mgr_id, mgr_key)
mgr_c = get_container(ctx, fsid, 'mgr', mgr_id)
# Note:the default port used by the Prometheus node exporter is opened in fw
ctx.meta_json = json.dumps({'service_name': 'mgr'})
deploy_daemon(ctx, fsid, 'mgr', mgr_id, mgr_c, uid, gid,
config=config, keyring=mgr_keyring, ports=[9283])
# wait for the service to become available
logger.info('Waiting for mgr to start...')
def is_mgr_available():
# type: () -> bool
timeout = ctx.timeout if ctx.timeout else 60 # seconds
try:
out = clifunc(['status', '-f', 'json-pretty'], timeout=timeout)
j = json.loads(out)
return j.get('mgrmap', {}).get('available', False)
except Exception as e:
logger.debug('status failed: %s' % e)
return False
is_available(ctx, 'mgr', is_mgr_available)
def prepare_ssh(
ctx: CephadmContext,
cli: Callable, wait_for_mgr_restart: Callable
) -> None:
cli(['cephadm', 'set-user', ctx.ssh_user])
if ctx.ssh_config:
logger.info('Using provided ssh config...')
mounts = {
pathify(ctx.ssh_config.name): '/tmp/cephadm-ssh-config:z',
}
cli(['cephadm', 'set-ssh-config', '-i', '/tmp/cephadm-ssh-config'], extra_mounts=mounts)
if ctx.ssh_private_key and ctx.ssh_public_key:
logger.info('Using provided ssh keys...')
mounts = {
pathify(ctx.ssh_private_key.name): '/tmp/cephadm-ssh-key:z',
pathify(ctx.ssh_public_key.name): '/tmp/cephadm-ssh-key.pub:z'
}
cli(['cephadm', 'set-priv-key', '-i', '/tmp/cephadm-ssh-key'], extra_mounts=mounts)
cli(['cephadm', 'set-pub-key', '-i', '/tmp/cephadm-ssh-key.pub'], extra_mounts=mounts)
else:
logger.info('Generating ssh key...')
cli(['cephadm', 'generate-key'])
ssh_pub = cli(['cephadm', 'get-pub-key'])
with open(ctx.output_pub_ssh_key, 'w') as f:
f.write(ssh_pub)
logger.info('Wrote public SSH key to %s' % ctx.output_pub_ssh_key)
logger.info('Adding key to %s@localhost authorized_keys...' % ctx.ssh_user)
try:
s_pwd = pwd.getpwnam(ctx.ssh_user)
except KeyError:
raise Error('Cannot find uid/gid for ssh-user: %s' % (ctx.ssh_user))
ssh_uid = s_pwd.pw_uid
ssh_gid = s_pwd.pw_gid
ssh_dir = os.path.join(s_pwd.pw_dir, '.ssh')
if not os.path.exists(ssh_dir):
makedirs(ssh_dir, ssh_uid, ssh_gid, 0o700)
auth_keys_file = '%s/authorized_keys' % ssh_dir
add_newline = False
if os.path.exists(auth_keys_file):
with open(auth_keys_file, 'r') as f:
f.seek(0, os.SEEK_END)
if f.tell() > 0:
f.seek(f.tell() - 1, os.SEEK_SET) # go to last char
if f.read() != '\n':
add_newline = True
with open(auth_keys_file, 'a') as f:
os.fchown(f.fileno(), ssh_uid, ssh_gid) # just in case we created it
os.fchmod(f.fileno(), 0o600) # just in case we created it
if add_newline:
f.write('\n')
f.write(ssh_pub.strip() + '\n')
host = get_hostname()
logger.info('Adding host %s...' % host)
try:
args = ['orch', 'host', 'add', host]
if ctx.mon_ip:
args.append(unwrap_ipv6(ctx.mon_ip))
cli(args)
except RuntimeError as e:
raise Error('Failed to add host <%s>: %s' % (host, e))
for t in ['mon', 'mgr']:
if not ctx.orphan_initial_daemons:
logger.info('Deploying %s service with default placement...' % t)
cli(['orch', 'apply', t])
else:
logger.info('Deploying unmanaged %s service...' % t)
cli(['orch', 'apply', t, '--unmanaged'])
if not ctx.orphan_initial_daemons:
logger.info('Deploying crash service with default placement...')
cli(['orch', 'apply', 'crash'])
if not ctx.skip_monitoring_stack:
for t in ['prometheus', 'grafana', 'node-exporter', 'alertmanager']:
logger.info('Deploying %s service with default placement...' % t)
cli(['orch', 'apply', t])
def enable_cephadm_mgr_module(
cli: Callable, wait_for_mgr_restart: Callable
) -> None:
logger.info('Enabling cephadm module...')
cli(['mgr', 'module', 'enable', 'cephadm'])
wait_for_mgr_restart()
logger.info('Setting orchestrator backend to cephadm...')
cli(['orch', 'set', 'backend', 'cephadm'])
def prepare_dashboard(
ctx: CephadmContext,
uid: int, gid: int,
cli: Callable, wait_for_mgr_restart: Callable
) -> None:
# Configure SSL port (cephadm only allows to configure dashboard SSL port)
# if the user does not want to use SSL he can change this setting once the cluster is up
cli(['config', 'set', 'mgr', 'mgr/dashboard/ssl_server_port', str(ctx.ssl_dashboard_port)])
# configuring dashboard parameters
logger.info('Enabling the dashboard module...')
cli(['mgr', 'module', 'enable', 'dashboard'])
wait_for_mgr_restart()
# dashboard crt and key
if ctx.dashboard_key and ctx.dashboard_crt:
logger.info('Using provided dashboard certificate...')
mounts = {
pathify(ctx.dashboard_crt.name): '/tmp/dashboard.crt:z',
pathify(ctx.dashboard_key.name): '/tmp/dashboard.key:z'
}
cli(['dashboard', 'set-ssl-certificate', '-i', '/tmp/dashboard.crt'], extra_mounts=mounts)
cli(['dashboard', 'set-ssl-certificate-key', '-i', '/tmp/dashboard.key'], extra_mounts=mounts)
else:
logger.info('Generating a dashboard self-signed certificate...')
cli(['dashboard', 'create-self-signed-cert'])
logger.info('Creating initial admin user...')
password = ctx.initial_dashboard_password or generate_password()
tmp_password_file = write_tmp(password, uid, gid)
cmd = ['dashboard', 'ac-user-create', ctx.initial_dashboard_user, '-i', '/tmp/dashboard.pw', 'administrator', '--force-password']
if not ctx.dashboard_password_noupdate:
cmd.append('--pwd-update-required')
cli(cmd, extra_mounts={pathify(tmp_password_file.name): '/tmp/dashboard.pw:z'})
logger.info('Fetching dashboard port number...')
out = cli(['config', 'get', 'mgr', 'mgr/dashboard/ssl_server_port'])
port = int(out)
# Open dashboard port
fw = Firewalld(ctx)
fw.open_ports([port])
fw.apply_rules()
logger.info('Ceph Dashboard is now available at:\n\n'
'\t URL: https://%s:%s/\n'
'\t User: %s\n'
'\tPassword: %s\n' % (
get_fqdn(), port,
ctx.initial_dashboard_user,
password))
def prepare_bootstrap_config(
ctx: CephadmContext,
fsid: str, mon_addr: str, image: str
) -> str:
cp = read_config(ctx.config)
if not cp.has_section('global'):
cp.add_section('global')
cp.set('global', 'fsid', fsid)
cp.set('global', 'mon_host', mon_addr)
cp.set('global', 'container_image', image)
if not cp.has_section('mon'):
cp.add_section('mon')
if (
not cp.has_option('mon', 'auth_allow_insecure_global_id_reclaim')
and not cp.has_option('mon', 'auth allow insecure global id reclaim')
):
cp.set('mon', 'auth_allow_insecure_global_id_reclaim', 'false')
if ctx.single_host_defaults:
logger.info('Adjusting default settings to suit single-host cluster...')
# replicate across osds, not hosts
if (
not cp.has_option('global', 'osd_crush_chooseleaf_type')
and not cp.has_option('global', 'osd crush chooseleaf type')
):
cp.set('global', 'osd_crush_chooseleaf_type', '0')
# replica 2x
if (
not cp.has_option('global', 'osd_pool_default_size')
and not cp.has_option('global', 'osd pool default size')
):
cp.set('global', 'osd_pool_default_size', '2')
# disable mgr standby modules (so we can colocate multiple mgrs on one host)
if not cp.has_section('mgr'):
cp.add_section('mgr')
if (
not cp.has_option('mgr', 'mgr_standby_modules')
and not cp.has_option('mgr', 'mgr standby modules')
):
cp.set('mgr', 'mgr_standby_modules', 'false')
if ctx.log_to_file:
cp.set('global', 'log_to_file', 'true')
cp.set('global', 'log_to_stderr', 'false')
cp.set('global', 'log_to_journald', 'false')
cp.set('global', 'mon_cluster_log_to_file', 'true')
cp.set('global', 'mon_cluster_log_to_stderr', 'false')
cp.set('global', 'mon_cluster_log_to_journald', 'false')
cpf = StringIO()
cp.write(cpf)
config = cpf.getvalue()
if ctx.registry_json or ctx.registry_url:
command_registry_login(ctx)
return config
def finish_bootstrap_config(
ctx: CephadmContext,
fsid: str,
config: str,
mon_id: str, mon_dir: str,
mon_network: Optional[str], ipv6: bool,
cli: Callable,
cluster_network: Optional[str], ipv6_cluster_network: bool
) -> None:
if not ctx.no_minimize_config:
logger.info('Assimilating anything we can from ceph.conf...')
cli([
'config', 'assimilate-conf',
'-i', '/var/lib/ceph/mon/ceph-%s/config' % mon_id
], {
mon_dir: '/var/lib/ceph/mon/ceph-%s:z' % mon_id
})
logger.info('Generating new minimal ceph.conf...')
cli([
'config', 'generate-minimal-conf',
'-o', '/var/lib/ceph/mon/ceph-%s/config' % mon_id
], {
mon_dir: '/var/lib/ceph/mon/ceph-%s:z' % mon_id
})
# re-read our minimized config
with open(mon_dir + '/config', 'r') as f:
config = f.read()
logger.info('Restarting the monitor...')
call_throws(ctx, [
'systemctl',
'restart',
get_unit_name(fsid, 'mon', mon_id)
])
if mon_network:
logger.info(f'Setting mon public_network to {mon_network}')
cli(['config', 'set', 'mon', 'public_network', mon_network])
if cluster_network:
logger.info(f'Setting cluster_network to {cluster_network}')
cli(['config', 'set', 'global', 'cluster_network', cluster_network])
if ipv6 or ipv6_cluster_network:
logger.info('Enabling IPv6 (ms_bind_ipv6) binding')
cli(['config', 'set', 'global', 'ms_bind_ipv6', 'true'])
with open(ctx.output_config, 'w') as f:
f.write(config)
logger.info('Wrote config to %s' % ctx.output_config)
pass
# funcs to process spec file for apply spec
def _parse_yaml_docs(f: Iterable[str]) -> List[List[str]]:
docs = []
current_doc = [] # type: List[str]
for line in f:
if '---' in line:
if current_doc:
docs.append(current_doc)
current_doc = []
else:
current_doc.append(line.rstrip())
if current_doc:
docs.append(current_doc)
return docs
def _parse_yaml_obj(doc: List[str]) -> Dict[str, str]:
# note: this only parses the first layer of yaml
obj = {} # type: Dict[str, str]
current_key = ''
for line in doc:
if line.startswith(' '):
obj[current_key] += line.strip()
elif line.endswith(':'):
current_key = line.strip(':')
obj[current_key] = ''
else:
current_key, val = line.split(':')
obj[current_key] = val.strip()
return obj
def parse_yaml_objs(f: Iterable[str]) -> List[Dict[str, str]]:
objs = []
for d in _parse_yaml_docs(f):
objs.append(_parse_yaml_obj(d))
return objs
def _distribute_ssh_keys(ctx: CephadmContext, host_spec: Dict[str, str], bootstrap_hostname: str) -> int:
# copy ssh key to hosts in host spec (used for apply spec)
ssh_key = '/etc/ceph/ceph.pub'
if ctx.ssh_public_key:
ssh_key = ctx.ssh_public_key.name
if bootstrap_hostname != host_spec['hostname']:
if 'addr' in host_spec:
addr = host_spec['addr']
else:
addr = host_spec['hostname']
out, err, code = call(ctx, ['sudo', '-u', ctx.ssh_user, 'ssh-copy-id', '-f', '-i', ssh_key, '-o StrictHostKeyChecking=no', '%s@%s' % (ctx.ssh_user, addr)])
if code:
logger.info('\nCopying ssh key to host %s at address %s failed!\n' % (host_spec['hostname'], addr))
return 1
else:
logger.info('Added ssh key to host %s at address %s\n' % (host_spec['hostname'], addr))
return 0
@default_image
def command_bootstrap(ctx):
# type: (CephadmContext) -> int
if not ctx.output_config:
ctx.output_config = os.path.join(ctx.output_dir, 'ceph.conf')
if not ctx.output_keyring:
ctx.output_keyring = os.path.join(ctx.output_dir,
'ceph.client.admin.keyring')
if not ctx.output_pub_ssh_key:
ctx.output_pub_ssh_key = os.path.join(ctx.output_dir, 'ceph.pub')
# verify output files
for f in [ctx.output_config, ctx.output_keyring,
ctx.output_pub_ssh_key]:
if not ctx.allow_overwrite:
if os.path.exists(f):
raise Error('%s already exists; delete or pass '
'--allow-overwrite to overwrite' % f)
dirname = os.path.dirname(f)
if dirname and not os.path.exists(dirname):
fname = os.path.basename(f)
logger.info(f'Creating directory {dirname} for {fname}')
try:
# use makedirs to create intermediate missing dirs
os.makedirs(dirname, 0o755)
except PermissionError:
raise Error(f'Unable to create {dirname} due to permissions failure. Retry with root, or sudo or preallocate the directory.')
(user_conf, _) = get_config_and_keyring(ctx)
if not ctx.skip_prepare_host:
command_prepare_host(ctx)
else:
logger.info('Skip prepare_host')
# initial vars
fsid = ctx.fsid or make_fsid()
if not is_fsid(fsid):
raise Error('not an fsid: %s' % fsid)
logger.info('Cluster fsid: %s' % fsid)
hostname = get_hostname()
if '.' in hostname and not ctx.allow_fqdn_hostname:
raise Error('hostname is a fully qualified domain name (%s); either fix (e.g., "sudo hostname %s" or similar) or pass --allow-fqdn-hostname' % (hostname, hostname.split('.')[0]))
mon_id = ctx.mon_id or hostname
mgr_id = ctx.mgr_id or generate_service_id()
lock = FileLock(ctx, fsid)
lock.acquire()
(addr_arg, ipv6, mon_network) = prepare_mon_addresses(ctx)
cluster_network, ipv6_cluster_network = prepare_cluster_network(ctx)
config = prepare_bootstrap_config(ctx, fsid, addr_arg, ctx.image)
if not ctx.skip_pull:
_pull_image(ctx, ctx.image)
image_ver = CephContainer(ctx, ctx.image, 'ceph', ['--version']).run().strip()
logger.info(f'Ceph version: {image_ver}')
if not ctx.allow_mismatched_release:
image_release = image_ver.split()[4]
if image_release not in \
[DEFAULT_IMAGE_RELEASE, LATEST_STABLE_RELEASE]:
raise Error(
f'Container release {image_release} != cephadm release {DEFAULT_IMAGE_RELEASE};'
' please use matching version of cephadm (pass --allow-mismatched-release to continue anyway)'
)
logger.info('Extracting ceph user uid/gid from container image...')
(uid, gid) = extract_uid_gid(ctx)
# create some initial keys
(mon_key, mgr_key, admin_key, bootstrap_keyring, admin_keyring) = create_initial_keys(ctx, uid, gid, mgr_id)
monmap = create_initial_monmap(ctx, uid, gid, fsid, mon_id, addr_arg)
(mon_dir, log_dir) = prepare_create_mon(ctx, uid, gid, fsid, mon_id,
bootstrap_keyring.name, monmap.name)
with open(mon_dir + '/config', 'w') as f:
os.fchown(f.fileno(), uid, gid)
os.fchmod(f.fileno(), 0o600)
f.write(config)
make_var_run(ctx, fsid, uid, gid)
create_mon(ctx, uid, gid, fsid, mon_id)
# config to issue various CLI commands
tmp_config = write_tmp(config, uid, gid)
# a CLI helper to reduce our typing
def cli(cmd, extra_mounts={}, timeout=DEFAULT_TIMEOUT):
# type: (List[str], Dict[str, str], Optional[int]) -> str
mounts = {
log_dir: '/var/log/ceph:z',
admin_keyring.name: '/etc/ceph/ceph.client.admin.keyring:z',
tmp_config.name: '/etc/ceph/ceph.conf:z',
}
for k, v in extra_mounts.items():
mounts[k] = v
timeout = timeout or ctx.timeout
return CephContainer(
ctx,
image=ctx.image,
entrypoint='/usr/bin/ceph',
args=cmd,
volume_mounts=mounts,
).run(timeout=timeout)
wait_for_mon(ctx, mon_id, mon_dir, admin_keyring.name, tmp_config.name)
finish_bootstrap_config(ctx, fsid, config, mon_id, mon_dir,
mon_network, ipv6, cli,
cluster_network, ipv6_cluster_network)
# output files
with open(ctx.output_keyring, 'w') as f:
os.fchmod(f.fileno(), 0o600)
f.write('[client.admin]\n'
'\tkey = ' + admin_key + '\n')
logger.info('Wrote keyring to %s' % ctx.output_keyring)
# create mgr
create_mgr(ctx, uid, gid, fsid, mgr_id, mgr_key, config, cli)
if user_conf:
# user given config settings were already assimilated earlier
# but if the given settings contained any attributes in
# the mgr (e.g. mgr/cephadm/container_image_prometheus)
# they don't seem to be stored if there isn't a mgr yet.
# Since re-assimilating the same conf settings should be
# idempotent we can just do it again here.
with tempfile.NamedTemporaryFile(buffering=0) as tmp:
tmp.write(user_conf.encode('utf-8'))
cli(['config', 'assimilate-conf',
'-i', '/var/lib/ceph/user.conf'],
{tmp.name: '/var/lib/ceph/user.conf:z'})
# wait for mgr to restart (after enabling a module)
def wait_for_mgr_restart() -> None:
# first get latest mgrmap epoch from the mon. try newer 'mgr
# stat' command first, then fall back to 'mgr dump' if
# necessary
try:
j = json_loads_retry(lambda: cli(['mgr', 'stat']))
except Exception:
j = json_loads_retry(lambda: cli(['mgr', 'dump']))
epoch = j['epoch']
# wait for mgr to have it
logger.info('Waiting for the mgr to restart...')
def mgr_has_latest_epoch():
# type: () -> bool
try:
out = cli(['tell', 'mgr', 'mgr_status'])
j = json.loads(out)
return j['mgrmap_epoch'] >= epoch
except Exception as e:
logger.debug('tell mgr mgr_status failed: %s' % e)
return False
is_available(ctx, 'mgr epoch %d' % epoch, mgr_has_latest_epoch)
enable_cephadm_mgr_module(cli, wait_for_mgr_restart)
# ssh
if not ctx.skip_ssh:
prepare_ssh(ctx, cli, wait_for_mgr_restart)
if ctx.registry_url and ctx.registry_username and ctx.registry_password:
registry_credentials = {'url': ctx.registry_url, 'username': ctx.registry_username, 'password': ctx.registry_password}
cli(['config-key', 'set', 'mgr/cephadm/registry_credentials', json.dumps(registry_credentials)])
cli(['config', 'set', 'mgr', 'mgr/cephadm/container_init', str(ctx.container_init), '--force'])
if not ctx.skip_dashboard:
prepare_dashboard(ctx, uid, gid, cli, wait_for_mgr_restart)
if ctx.output_config == '/etc/ceph/ceph.conf' and not ctx.skip_admin_label:
logger.info('Enabling client.admin keyring and conf on hosts with "admin" label')
try:
cli(['orch', 'client-keyring', 'set', 'client.admin', 'label:_admin'])
cli(['orch', 'host', 'label', 'add', get_hostname(), '_admin'])
except Exception:
logger.info('Unable to set up "admin" label; assuming older version of Ceph')
if ctx.apply_spec:
logger.info('Applying %s to cluster' % ctx.apply_spec)
# copy ssh key to hosts in spec file
with open(ctx.apply_spec) as f:
try:
for spec in parse_yaml_objs(f):
if spec.get('service_type') == 'host':
_distribute_ssh_keys(ctx, spec, hostname)
except ValueError:
logger.info('Unable to parse %s succesfully' % ctx.apply_spec)
mounts = {}
mounts[pathify(ctx.apply_spec)] = '/tmp/spec.yml:ro'
try:
out = cli(['orch', 'apply', '-i', '/tmp/spec.yml'], extra_mounts=mounts)
logger.info(out)
except Exception:
logger.info('\nApplying %s to cluster failed!\n' % ctx.apply_spec)
# enable autotune for osd_memory_target
logger.info('Enabling autotune for osd_memory_target')
cli(['config', 'set', 'osd', 'osd_memory_target_autotune', 'true'])
# Notify the Dashboard to show the 'Expand cluster' page on first log in.
cli(['config-key', 'set', 'mgr/dashboard/cluster/status', 'INSTALLED'])
logger.info('You can access the Ceph CLI with:\n\n'
'\tsudo %s shell --fsid %s -c %s -k %s\n' % (
sys.argv[0],
fsid,
ctx.output_config,
ctx.output_keyring))
logger.info('Please consider enabling telemetry to help improve Ceph:\n\n'
'\tceph telemetry on\n\n'
'For more information see:\n\n'
'\thttps://docs.ceph.com/docs/master/mgr/telemetry/\n')
logger.info('Bootstrap complete.')
return 0
##################################
def command_registry_login(ctx: CephadmContext) -> int:
if ctx.registry_json:
logger.info('Pulling custom registry login info from %s.' % ctx.registry_json)
d = get_parm(ctx.registry_json)
if d.get('url') and d.get('username') and d.get('password'):
ctx.registry_url = d.get('url')
ctx.registry_username = d.get('username')
ctx.registry_password = d.get('password')
registry_login(ctx, ctx.registry_url, ctx.registry_username, ctx.registry_password)
else:
raise Error('json provided for custom registry login did not include all necessary fields. '
'Please setup json file as\n'
'{\n'
' "url": "REGISTRY_URL",\n'
' "username": "REGISTRY_USERNAME",\n'
' "password": "REGISTRY_PASSWORD"\n'
'}\n')
elif ctx.registry_url and ctx.registry_username and ctx.registry_password:
registry_login(ctx, ctx.registry_url, ctx.registry_username, ctx.registry_password)
else:
raise Error('Invalid custom registry arguments received. To login to a custom registry include '
'--registry-url, --registry-username and --registry-password '
'options or --registry-json option')
return 0
def registry_login(ctx: CephadmContext, url: Optional[str], username: Optional[str], password: Optional[str]) -> None:
logger.info('Logging into custom registry.')
try:
engine = ctx.container_engine
cmd = [engine.path, 'login',
'-u', username, '-p', password,
url]
if isinstance(engine, Podman):
cmd.append('--authfile=/etc/ceph/podman-auth.json')
out, _, _ = call_throws(ctx, cmd)
if isinstance(engine, Podman):
os.chmod('/etc/ceph/podman-auth.json', 0o600)
except Exception:
raise Error('Failed to login to custom registry @ %s as %s with given password' % (ctx.registry_url, ctx.registry_username))
##################################
def extract_uid_gid_monitoring(ctx, daemon_type):
# type: (CephadmContext, str) -> Tuple[int, int]
if daemon_type == 'prometheus':
uid, gid = extract_uid_gid(ctx, file_path='/etc/prometheus')
elif daemon_type == 'node-exporter':
uid, gid = 65534, 65534
elif daemon_type == 'grafana':
uid, gid = extract_uid_gid(ctx, file_path='/var/lib/grafana')
elif daemon_type == 'alertmanager':
uid, gid = extract_uid_gid(ctx, file_path=['/etc/alertmanager', '/etc/prometheus'])
else:
raise Error('{} not implemented yet'.format(daemon_type))
return uid, gid
def get_container_with_extra_args(ctx: CephadmContext,
fsid: str, daemon_type: str, daemon_id: Union[int, str],
privileged: bool = False,
ptrace: bool = False,
container_args: Optional[List[str]] = None) -> 'CephContainer':
# wrapper for get_container that additionally adds extra_container_args if present
# used for deploying daemons with additional podman/docker container arguments
c = get_container(ctx, fsid, daemon_type, daemon_id, privileged, ptrace, container_args)
if 'extra_container_args' in ctx and ctx.extra_container_args:
c.container_args.extend(ctx.extra_container_args)
return c
@default_image
def command_deploy(ctx):
# type: (CephadmContext) -> None
daemon_type, daemon_id = ctx.name.split('.', 1)
lock = FileLock(ctx, ctx.fsid)
lock.acquire()
if daemon_type not in get_supported_daemons():
raise Error('daemon type %s not recognized' % daemon_type)
redeploy = False
unit_name = get_unit_name(ctx.fsid, daemon_type, daemon_id)
(_, state, _) = check_unit(ctx, unit_name)
if state == 'running' or is_container_running(ctx, CephContainer.for_daemon(ctx, ctx.fsid, daemon_type, daemon_id, 'bash')):
redeploy = True
if ctx.reconfig:
logger.info('%s daemon %s ...' % ('Reconfig', ctx.name))
elif redeploy:
logger.info('%s daemon %s ...' % ('Redeploy', ctx.name))
else:
logger.info('%s daemon %s ...' % ('Deploy', ctx.name))
# Get and check ports explicitly required to be opened
daemon_ports = [] # type: List[int]
# only check port in use if not reconfig or redeploy since service
# we are redeploying/reconfiguring will already be using the port
if not ctx.reconfig and not redeploy:
if ctx.tcp_ports:
daemon_ports = list(map(int, ctx.tcp_ports.split()))
if daemon_type in Ceph.daemons:
config, keyring = get_config_and_keyring(ctx)
uid, gid = extract_uid_gid(ctx)
make_var_run(ctx, ctx.fsid, uid, gid)
c = get_container_with_extra_args(ctx, ctx.fsid, daemon_type, daemon_id,
ptrace=ctx.allow_ptrace)
deploy_daemon(ctx, ctx.fsid, daemon_type, daemon_id, c, uid, gid,
config=config, keyring=keyring,
osd_fsid=ctx.osd_fsid,
reconfig=ctx.reconfig,
ports=daemon_ports)
elif daemon_type in Monitoring.components:
# monitoring daemon - prometheus, grafana, alertmanager, node-exporter
# Default Checks
# make sure provided config-json is sufficient
config = get_parm(ctx.config_json) # type: ignore
required_files = Monitoring.components[daemon_type].get('config-json-files', list())
required_args = Monitoring.components[daemon_type].get('config-json-args', list())
if required_files:
if not config or not all(c in config.get('files', {}).keys() for c in required_files): # type: ignore
raise Error('{} deployment requires config-json which must '
'contain file content for {}'.format(daemon_type.capitalize(), ', '.join(required_files)))
if required_args:
if not config or not all(c in config.keys() for c in required_args): # type: ignore
raise Error('{} deployment requires config-json which must '
'contain arg for {}'.format(daemon_type.capitalize(), ', '.join(required_args)))
uid, gid = extract_uid_gid_monitoring(ctx, daemon_type)
c = get_container_with_extra_args(ctx, ctx.fsid, daemon_type, daemon_id)
deploy_daemon(ctx, ctx.fsid, daemon_type, daemon_id, c, uid, gid,
reconfig=ctx.reconfig,
ports=daemon_ports)
elif daemon_type == NFSGanesha.daemon_type:
if not ctx.reconfig and not redeploy and not daemon_ports:
daemon_ports = list(NFSGanesha.port_map.values())
config, keyring = get_config_and_keyring(ctx)
# TODO: extract ganesha uid/gid (997, 994) ?
uid, gid = extract_uid_gid(ctx)
c = get_container_with_extra_args(ctx, ctx.fsid, daemon_type, daemon_id)
deploy_daemon(ctx, ctx.fsid, daemon_type, daemon_id, c, uid, gid,
config=config, keyring=keyring,
reconfig=ctx.reconfig,
ports=daemon_ports)
elif daemon_type == CephIscsi.daemon_type:
config, keyring = get_config_and_keyring(ctx)
uid, gid = extract_uid_gid(ctx)
c = get_container_with_extra_args(ctx, ctx.fsid, daemon_type, daemon_id)
deploy_daemon(ctx, ctx.fsid, daemon_type, daemon_id, c, uid, gid,
config=config, keyring=keyring,
reconfig=ctx.reconfig,
ports=daemon_ports)
elif daemon_type == HAproxy.daemon_type:
haproxy = HAproxy.init(ctx, ctx.fsid, daemon_id)
uid, gid = haproxy.extract_uid_gid_haproxy()
c = get_container_with_extra_args(ctx, ctx.fsid, daemon_type, daemon_id)
deploy_daemon(ctx, ctx.fsid, daemon_type, daemon_id, c, uid, gid,
reconfig=ctx.reconfig,
ports=daemon_ports)
elif daemon_type == Keepalived.daemon_type:
keepalived = Keepalived.init(ctx, ctx.fsid, daemon_id)
uid, gid = keepalived.extract_uid_gid_keepalived()
c = get_container_with_extra_args(ctx, ctx.fsid, daemon_type, daemon_id)
deploy_daemon(ctx, ctx.fsid, daemon_type, daemon_id, c, uid, gid,
reconfig=ctx.reconfig,
ports=daemon_ports)
elif daemon_type == CustomContainer.daemon_type:
cc = CustomContainer.init(ctx, ctx.fsid, daemon_id)
if not ctx.reconfig and not redeploy:
daemon_ports.extend(cc.ports)
c = get_container_with_extra_args(ctx, ctx.fsid, daemon_type, daemon_id,
privileged=cc.privileged,
ptrace=ctx.allow_ptrace)
deploy_daemon(ctx, ctx.fsid, daemon_type, daemon_id, c,
uid=cc.uid, gid=cc.gid, config=None,
keyring=None, reconfig=ctx.reconfig,
ports=daemon_ports)
elif daemon_type == CephadmAgent.daemon_type:
# get current user gid and uid
uid = os.getuid()
gid = os.getgid()
deploy_daemon(ctx, ctx.fsid, daemon_type, daemon_id, None,
uid, gid, ports=daemon_ports)
elif daemon_type == SNMPGateway.daemon_type:
sc = SNMPGateway.init(ctx, ctx.fsid, daemon_id)
c = get_container_with_extra_args(ctx, ctx.fsid, daemon_type, daemon_id)
deploy_daemon(ctx, ctx.fsid, daemon_type, daemon_id, c,
sc.uid, sc.gid,
ports=daemon_ports)
else:
raise Error('daemon type {} not implemented in command_deploy function'
.format(daemon_type))
##################################
@infer_image
def command_run(ctx):
# type: (CephadmContext) -> int
(daemon_type, daemon_id) = ctx.name.split('.', 1)
c = get_container(ctx, ctx.fsid, daemon_type, daemon_id)
command = c.run_cmd()
return call_timeout(ctx, command, ctx.timeout)
##################################
@infer_fsid
@infer_config
@infer_image
@validate_fsid
def command_shell(ctx):
# type: (CephadmContext) -> int
cp = read_config(ctx.config)
if cp.has_option('global', 'fsid') and \
cp.get('global', 'fsid') != ctx.fsid:
raise Error('fsid does not match ceph.conf')
if ctx.name:
if '.' in ctx.name:
(daemon_type, daemon_id) = ctx.name.split('.', 1)
else:
daemon_type = ctx.name
daemon_id = None
else:
daemon_type = 'osd' # get the most mounts
daemon_id = None
if ctx.fsid and daemon_type in Ceph.daemons:
make_log_dir(ctx, ctx.fsid)
if daemon_id and not ctx.fsid:
raise Error('must pass --fsid to specify cluster')
# use /etc/ceph files by default, if present. we do this instead of
# making these defaults in the arg parser because we don't want an error
# if they don't exist.
if not ctx.keyring and os.path.exists(SHELL_DEFAULT_KEYRING):
ctx.keyring = SHELL_DEFAULT_KEYRING
container_args: List[str] = ['-i']
mounts = get_container_mounts(ctx, ctx.fsid, daemon_type, daemon_id,
no_config=True if ctx.config else False)
binds = get_container_binds(ctx, ctx.fsid, daemon_type, daemon_id)
if ctx.config:
mounts[pathify(ctx.config)] = '/etc/ceph/ceph.conf:z'
if ctx.keyring:
mounts[pathify(ctx.keyring)] = '/etc/ceph/ceph.keyring:z'
if ctx.mount:
for _mount in ctx.mount:
split_src_dst = _mount.split(':')
mount = pathify(split_src_dst[0])
filename = os.path.basename(split_src_dst[0])
if len(split_src_dst) > 1:
dst = split_src_dst[1]
if len(split_src_dst) == 3:
dst = '{}:{}'.format(dst, split_src_dst[2])
mounts[mount] = dst
else:
mounts[mount] = '/mnt/{}'.format(filename)
if ctx.command:
command = ctx.command
else:
command = ['bash']
container_args += [
'-t',
'-e', 'LANG=C',
'-e', 'PS1=%s' % CUSTOM_PS1,
]
if ctx.fsid:
home = os.path.join(ctx.data_dir, ctx.fsid, 'home')
if not os.path.exists(home):
logger.debug('Creating root home at %s' % home)
makedirs(home, 0, 0, 0o660)
if os.path.exists('/etc/skel'):
for f in os.listdir('/etc/skel'):
if f.startswith('.bash'):
shutil.copyfile(os.path.join('/etc/skel', f),
os.path.join(home, f))
mounts[home] = '/root'
for i in ctx.volume:
a, b = i.split(':', 1)
mounts[a] = b
c = CephContainer(
ctx,
image=ctx.image,
entrypoint='doesnotmatter',
args=[],
container_args=container_args,
volume_mounts=mounts,
bind_mounts=binds,
envs=ctx.env,
privileged=True)
command = c.shell_cmd(command)
return call_timeout(ctx, command, ctx.timeout)
##################################
@infer_fsid
def command_enter(ctx):
# type: (CephadmContext) -> int
if not ctx.fsid:
raise Error('must pass --fsid to specify cluster')
(daemon_type, daemon_id) = ctx.name.split('.', 1)
container_args = ['-i'] # type: List[str]
if ctx.command:
command = ctx.command
else:
command = ['sh']
container_args += [
'-t',
'-e', 'LANG=C',
'-e', 'PS1=%s' % CUSTOM_PS1,
]
c = CephContainer(
ctx,
image=ctx.image,
entrypoint='doesnotmatter',
container_args=container_args,
cname='ceph-%s-%s.%s' % (ctx.fsid, daemon_type, daemon_id),
)
command = c.exec_cmd(command)
return call_timeout(ctx, command, ctx.timeout)
##################################
@infer_fsid
@infer_image
@validate_fsid
def command_ceph_volume(ctx):
# type: (CephadmContext) -> None
cp = read_config(ctx.config)
if cp.has_option('global', 'fsid') and \
cp.get('global', 'fsid') != ctx.fsid:
raise Error('fsid does not match ceph.conf')
if ctx.fsid:
make_log_dir(ctx, ctx.fsid)
lock = FileLock(ctx, ctx.fsid)
lock.acquire()
(uid, gid) = (0, 0) # ceph-volume runs as root
mounts = get_container_mounts(ctx, ctx.fsid, 'osd', None)
tmp_config = None
tmp_keyring = None
(config, keyring) = get_config_and_keyring(ctx)
if config:
# tmp config file
tmp_config = write_tmp(config, uid, gid)
mounts[tmp_config.name] = '/etc/ceph/ceph.conf:z'
if keyring:
# tmp keyring file
tmp_keyring = write_tmp(keyring, uid, gid)
mounts[tmp_keyring.name] = '/var/lib/ceph/bootstrap-osd/ceph.keyring:z'
c = get_ceph_volume_container(
ctx,
envs=ctx.env,
args=ctx.command,
volume_mounts=mounts,
)
out, err, code = call_throws(ctx, c.run_cmd())
if not code:
print(out)
##################################
@infer_fsid
def command_unit(ctx):
# type: (CephadmContext) -> None
if not ctx.fsid:
raise Error('must pass --fsid to specify cluster')
unit_name = get_unit_name_by_daemon_name(ctx, ctx.fsid, ctx.name)
call_throws(ctx, [
'systemctl',
ctx.command,
unit_name],
verbosity=CallVerbosity.VERBOSE,
desc=''
)
##################################
@infer_fsid
def command_logs(ctx):
# type: (CephadmContext) -> None
if not ctx.fsid:
raise Error('must pass --fsid to specify cluster')
unit_name = get_unit_name_by_daemon_name(ctx, ctx.fsid, ctx.name)
cmd = [find_program('journalctl')]
cmd.extend(['-u', unit_name])
if ctx.command:
cmd.extend(ctx.command)
# call this directly, without our wrapper, so that we get an unmolested
# stdout with logger prefixing.
logger.debug('Running command: %s' % ' '.join(cmd))
subprocess.call(cmd, env=os.environ.copy()) # type: ignore
##################################
def list_networks(ctx):
# type: (CephadmContext) -> Dict[str,Dict[str, Set[str]]]
# sadly, 18.04's iproute2 4.15.0-2ubun doesn't support the -j flag,
# so we'll need to use a regex to parse 'ip' command output.
#
# out, _, _ = call_throws(['ip', '-j', 'route', 'ls'])
# j = json.loads(out)
# for x in j:
res = _list_ipv4_networks(ctx)
res.update(_list_ipv6_networks(ctx))
return res
def _list_ipv4_networks(ctx: CephadmContext) -> Dict[str, Dict[str, Set[str]]]:
execstr: Optional[str] = find_executable('ip')
if not execstr:
raise FileNotFoundError("unable to find 'ip' command")
out, _, _ = call_throws(ctx, [execstr, 'route', 'ls'])
return _parse_ipv4_route(out)
def _parse_ipv4_route(out: str) -> Dict[str, Dict[str, Set[str]]]:
r = {} # type: Dict[str, Dict[str, Set[str]]]
p = re.compile(r'^(\S+) dev (\S+) (.*)scope link (.*)src (\S+)')
for line in out.splitlines():
m = p.findall(line)
if not m:
continue
net = m[0][0]
iface = m[0][1]
ip = m[0][4]
if net not in r:
r[net] = {}
if iface not in r[net]:
r[net][iface] = set()
r[net][iface].add(ip)
return r
def _list_ipv6_networks(ctx: CephadmContext) -> Dict[str, Dict[str, Set[str]]]:
execstr: Optional[str] = find_executable('ip')
if not execstr:
raise FileNotFoundError("unable to find 'ip' command")
routes, _, _ = call_throws(ctx, [execstr, '-6', 'route', 'ls'])
ips, _, _ = call_throws(ctx, [execstr, '-6', 'addr', 'ls'])
return _parse_ipv6_route(routes, ips)
def _parse_ipv6_route(routes: str, ips: str) -> Dict[str, Dict[str, Set[str]]]:
r = {} # type: Dict[str, Dict[str, Set[str]]]
route_p = re.compile(r'^(\S+) dev (\S+) proto (\S+) metric (\S+) .*pref (\S+)$')
ip_p = re.compile(r'^\s+inet6 (\S+)/(.*)scope (.*)$')
iface_p = re.compile(r'^(\d+): (\S+): (.*)$')
for line in routes.splitlines():
m = route_p.findall(line)
if not m or m[0][0].lower() == 'default':
continue
net = m[0][0]
if '/' not in net: # only consider networks with a mask
continue
iface = m[0][1]
if net not in r:
r[net] = {}
if iface not in r[net]:
r[net][iface] = set()
iface = None
for line in ips.splitlines():
m = ip_p.findall(line)
if not m:
m = iface_p.findall(line)
if m:
# drop @... suffix, if present
iface = m[0][1].split('@')[0]
continue
ip = m[0][0]
# find the network it belongs to
net = [n for n in r.keys()
if ipaddress.ip_address(ip) in ipaddress.ip_network(n)]
if net and iface in r[net[0]]:
assert(iface)
r[net[0]][iface].add(ip)
return r
def command_list_networks(ctx):
# type: (CephadmContext) -> None
r = list_networks(ctx)
def serialize_sets(obj: Any) -> Any:
return list(obj) if isinstance(obj, set) else obj
print(json.dumps(r, indent=4, default=serialize_sets))
##################################
def command_ls(ctx):
# type: (CephadmContext) -> None
ls = list_daemons(ctx, detail=not ctx.no_detail,
legacy_dir=ctx.legacy_dir)
print(json.dumps(ls, indent=4))
def with_units_to_int(v: str) -> int:
if v.endswith('iB'):
v = v[:-2]
elif v.endswith('B'):
v = v[:-1]
mult = 1
if v[-1].upper() == 'K':
mult = 1024
v = v[:-1]
elif v[-1].upper() == 'M':
mult = 1024 * 1024
v = v[:-1]
elif v[-1].upper() == 'G':
mult = 1024 * 1024 * 1024
v = v[:-1]
elif v[-1].upper() == 'T':
mult = 1024 * 1024 * 1024 * 1024
v = v[:-1]
return int(float(v) * mult)
def list_daemons(ctx, detail=True, legacy_dir=None):
# type: (CephadmContext, bool, Optional[str]) -> List[Dict[str, str]]
host_version: Optional[str] = None
ls = []
container_path = ctx.container_engine.path
data_dir = ctx.data_dir
if legacy_dir is not None:
data_dir = os.path.abspath(legacy_dir + data_dir)
# keep track of ceph versions we see
seen_versions = {} # type: Dict[str, Optional[str]]
# keep track of image digests
seen_digests = {} # type: Dict[str, List[str]]
# keep track of memory usage we've seen
seen_memusage = {} # type: Dict[str, int]
out, err, code = call(
ctx,
[container_path, 'stats', '--format', '{{.ID}},{{.MemUsage}}', '--no-stream'],
verbosity=CallVerbosity.DEBUG
)
seen_memusage_cid_len, seen_memusage = _parse_mem_usage(code, out)
# /var/lib/ceph
if os.path.exists(data_dir):
for i in os.listdir(data_dir):
if i in ['mon', 'osd', 'mds', 'mgr']:
daemon_type = i
for j in os.listdir(os.path.join(data_dir, i)):
if '-' not in j:
continue
(cluster, daemon_id) = j.split('-', 1)
fsid = get_legacy_daemon_fsid(ctx,
cluster, daemon_type, daemon_id,
legacy_dir=legacy_dir)
legacy_unit_name = 'ceph-%s@%s' % (daemon_type, daemon_id)
val: Dict[str, Any] = {
'style': 'legacy',
'name': '%s.%s' % (daemon_type, daemon_id),
'fsid': fsid if fsid is not None else 'unknown',
'systemd_unit': legacy_unit_name,
}
if detail:
(val['enabled'], val['state'], _) = check_unit(ctx, legacy_unit_name)
if not host_version:
try:
out, err, code = call(ctx,
['ceph', '-v'],
verbosity=CallVerbosity.DEBUG)
if not code and out.startswith('ceph version '):
host_version = out.split(' ')[2]
except Exception:
pass
val['host_version'] = host_version
ls.append(val)
elif is_fsid(i):
fsid = str(i) # convince mypy that fsid is a str here
for j in os.listdir(os.path.join(data_dir, i)):
if '.' in j and os.path.isdir(os.path.join(data_dir, fsid, j)):
name = j
(daemon_type, daemon_id) = j.split('.', 1)
unit_name = get_unit_name(fsid,
daemon_type,
daemon_id)
else:
continue
val = {
'style': 'cephadm:v1',
'name': name,
'fsid': fsid,
'systemd_unit': unit_name,
}
if detail:
# get container id
(val['enabled'], val['state'], _) = check_unit(ctx, unit_name)
container_id = None
image_name = None
image_id = None
image_digests = None
version = None
start_stamp = None
out, err, code = get_container_stats(ctx, container_path, fsid, daemon_type, daemon_id)
if not code:
(container_id, image_name, image_id, start,
version) = out.strip().split(',')
image_id = normalize_container_id(image_id)
daemon_type = name.split('.', 1)[0]
start_stamp = try_convert_datetime(start)
# collect digests for this image id
image_digests = seen_digests.get(image_id)
if not image_digests:
out, err, code = call(
ctx,
[
container_path, 'image', 'inspect', image_id,
'--format', '{{.RepoDigests}}',
],
verbosity=CallVerbosity.DEBUG)
if not code:
image_digests = list(set(map(
normalize_image_digest,
out.strip()[1:-1].split(' '))))
seen_digests[image_id] = image_digests
# identify software version inside the container (if we can)
if not version or '.' not in version:
version = seen_versions.get(image_id, None)
if daemon_type == NFSGanesha.daemon_type:
version = NFSGanesha.get_version(ctx, container_id)
if daemon_type == CephIscsi.daemon_type:
version = CephIscsi.get_version(ctx, container_id)
elif not version:
if daemon_type in Ceph.daemons:
out, err, code = call(ctx,
[container_path, 'exec', container_id,
'ceph', '-v'],
verbosity=CallVerbosity.DEBUG)
if not code and \
out.startswith('ceph version '):
version = out.split(' ')[2]
seen_versions[image_id] = version
elif daemon_type == 'grafana':
out, err, code = call(ctx,
[container_path, 'exec', container_id,
'grafana-server', '-v'],
verbosity=CallVerbosity.DEBUG)
if not code and \
out.startswith('Version '):
version = out.split(' ')[1]
seen_versions[image_id] = version
elif daemon_type in ['prometheus',
'alertmanager',
'node-exporter']:
version = Monitoring.get_version(ctx, container_id, daemon_type)
seen_versions[image_id] = version
elif daemon_type == 'haproxy':
out, err, code = call(ctx,
[container_path, 'exec', container_id,
'haproxy', '-v'],
verbosity=CallVerbosity.DEBUG)
if not code and \
out.startswith('HA-Proxy version '):
version = out.split(' ')[2]
seen_versions[image_id] = version
elif daemon_type == 'keepalived':
out, err, code = call(ctx,
[container_path, 'exec', container_id,
'keepalived', '--version'],
verbosity=CallVerbosity.DEBUG)
if not code and \
err.startswith('Keepalived '):
version = err.split(' ')[1]
if version[0] == 'v':
version = version[1:]
seen_versions[image_id] = version
elif daemon_type == CustomContainer.daemon_type:
# Because a custom container can contain
# everything, we do not know which command
# to execute to get the version.
pass
elif daemon_type == SNMPGateway.daemon_type:
version = SNMPGateway.get_version(ctx, fsid, daemon_id)
seen_versions[image_id] = version
else:
logger.warning('version for unknown daemon type %s' % daemon_type)
else:
vfile = os.path.join(data_dir, fsid, j, 'unit.image') # type: ignore
try:
with open(vfile, 'r') as f:
image_name = f.read().strip() or None
except IOError:
pass
# unit.meta?
mfile = os.path.join(data_dir, fsid, j, 'unit.meta') # type: ignore
try:
with open(mfile, 'r') as f:
meta = json.loads(f.read())
val.update(meta)
except IOError:
pass
val['container_id'] = container_id
val['container_image_name'] = image_name
val['container_image_id'] = image_id
val['container_image_digests'] = image_digests
if container_id:
val['memory_usage'] = seen_memusage.get(container_id[0:seen_memusage_cid_len])
val['version'] = version
val['started'] = start_stamp
val['created'] = get_file_timestamp(
os.path.join(data_dir, fsid, j, 'unit.created')
)
val['deployed'] = get_file_timestamp(
os.path.join(data_dir, fsid, j, 'unit.image'))
val['configured'] = get_file_timestamp(
os.path.join(data_dir, fsid, j, 'unit.configured'))
ls.append(val)
return ls
def _parse_mem_usage(code: int, out: str) -> Tuple[int, Dict[str, int]]:
# keep track of memory usage we've seen
seen_memusage = {} # type: Dict[str, int]
seen_memusage_cid_len = 0
if not code:
for line in out.splitlines():
(cid, usage) = line.split(',')
(used, limit) = usage.split(' / ')
try:
seen_memusage[cid] = with_units_to_int(used)
if not seen_memusage_cid_len:
seen_memusage_cid_len = len(cid)
except ValueError:
logger.info('unable to parse memory usage line\n>{}'.format(line))
pass
return seen_memusage_cid_len, seen_memusage
def get_daemon_description(ctx, fsid, name, detail=False, legacy_dir=None):
# type: (CephadmContext, str, str, bool, Optional[str]) -> Dict[str, str]
for d in list_daemons(ctx, detail=detail, legacy_dir=legacy_dir):
if d['fsid'] != fsid:
continue
if d['name'] != name:
continue
return d
raise Error('Daemon not found: {}. See `cephadm ls`'.format(name))
def get_container_stats(ctx: CephadmContext, container_path: str, fsid: str, daemon_type: str, daemon_id: str) -> Tuple[str, str, int]:
c = CephContainer.for_daemon(ctx, fsid, daemon_type, daemon_id, 'bash')
out, err, code = '', '', -1
for name in (c.cname, c.old_cname):
cmd = [
container_path, 'inspect',
'--format', '{{.Id}},{{.Config.Image}},{{.Image}},{{.Created}},{{index .Config.Labels "io.ceph.version"}}',
name
]
out, err, code = call(ctx, cmd, verbosity=CallVerbosity.DEBUG)
if not code:
break
return out, err, code
##################################
@default_image
def command_adopt(ctx):
# type: (CephadmContext) -> None
if not ctx.skip_pull:
_pull_image(ctx, ctx.image)
(daemon_type, daemon_id) = ctx.name.split('.', 1)
# legacy check
if ctx.style != 'legacy':
raise Error('adoption of style %s not implemented' % ctx.style)
# lock
fsid = get_legacy_daemon_fsid(ctx,
ctx.cluster,
daemon_type,
daemon_id,
legacy_dir=ctx.legacy_dir)
if not fsid:
raise Error('could not detect legacy fsid; set fsid in ceph.conf')
lock = FileLock(ctx, fsid)
lock.acquire()
# call correct adoption
if daemon_type in Ceph.daemons:
command_adopt_ceph(ctx, daemon_type, daemon_id, fsid)
elif daemon_type == 'prometheus':
command_adopt_prometheus(ctx, daemon_id, fsid)
elif daemon_type == 'grafana':
command_adopt_grafana(ctx, daemon_id, fsid)
elif daemon_type == 'node-exporter':
raise Error('adoption of node-exporter not implemented')
elif daemon_type == 'alertmanager':
command_adopt_alertmanager(ctx, daemon_id, fsid)
else:
raise Error('daemon type %s not recognized' % daemon_type)
class AdoptOsd(object):
def __init__(self, ctx, osd_data_dir, osd_id):
# type: (CephadmContext, str, str) -> None
self.ctx = ctx
self.osd_data_dir = osd_data_dir
self.osd_id = osd_id
def check_online_osd(self):
# type: () -> Tuple[Optional[str], Optional[str]]
osd_fsid, osd_type = None, None
path = os.path.join(self.osd_data_dir, 'fsid')
try:
with open(path, 'r') as f:
osd_fsid = f.read().strip()
logger.info('Found online OSD at %s' % path)
except IOError:
logger.info('Unable to read OSD fsid from %s' % path)
if os.path.exists(os.path.join(self.osd_data_dir, 'type')):
with open(os.path.join(self.osd_data_dir, 'type')) as f:
osd_type = f.read().strip()
else:
logger.info('"type" file missing for OSD data dir')
return osd_fsid, osd_type
def check_offline_lvm_osd(self):
# type: () -> Tuple[Optional[str], Optional[str]]
osd_fsid, osd_type = None, None
c = get_ceph_volume_container(
self.ctx,
args=['lvm', 'list', '--format=json'],
)
out, err, code = call_throws(self.ctx, c.run_cmd())
if not code:
try:
js = json.loads(out)
if self.osd_id in js:
logger.info('Found offline LVM OSD {}'.format(self.osd_id))
osd_fsid = js[self.osd_id][0]['tags']['ceph.osd_fsid']
for device in js[self.osd_id]:
if device['tags']['ceph.type'] == 'block':
osd_type = 'bluestore'
break
if device['tags']['ceph.type'] == 'data':
osd_type = 'filestore'
break
except ValueError as e:
logger.info('Invalid JSON in ceph-volume lvm list: {}'.format(e))
return osd_fsid, osd_type
def check_offline_simple_osd(self):
# type: () -> Tuple[Optional[str], Optional[str]]
osd_fsid, osd_type = None, None
osd_file = glob('/etc/ceph/osd/{}-[a-f0-9-]*.json'.format(self.osd_id))
if len(osd_file) == 1:
with open(osd_file[0], 'r') as f:
try:
js = json.loads(f.read())
logger.info('Found offline simple OSD {}'.format(self.osd_id))
osd_fsid = js['fsid']
osd_type = js['type']
if osd_type != 'filestore':
# need this to be mounted for the adopt to work, as it
# needs to move files from this directory
call_throws(self.ctx, ['mount', js['data']['path'], self.osd_data_dir])
except ValueError as e:
logger.info('Invalid JSON in {}: {}'.format(osd_file, e))
return osd_fsid, osd_type
def command_adopt_ceph(ctx, daemon_type, daemon_id, fsid):
# type: (CephadmContext, str, str, str) -> None
(uid, gid) = extract_uid_gid(ctx)
data_dir_src = ('/var/lib/ceph/%s/%s-%s' %
(daemon_type, ctx.cluster, daemon_id))
data_dir_src = os.path.abspath(ctx.legacy_dir + data_dir_src)
if not os.path.exists(data_dir_src):
raise Error("{}.{} data directory '{}' does not exist. "
'Incorrect ID specified, or daemon already adopted?'.format(
daemon_type, daemon_id, data_dir_src))
osd_fsid = None
if daemon_type == 'osd':
adopt_osd = AdoptOsd(ctx, data_dir_src, daemon_id)
osd_fsid, osd_type = adopt_osd.check_online_osd()
if not osd_fsid:
osd_fsid, osd_type = adopt_osd.check_offline_lvm_osd()
if not osd_fsid:
osd_fsid, osd_type = adopt_osd.check_offline_simple_osd()
if not osd_fsid:
raise Error('Unable to find OSD {}'.format(daemon_id))
logger.info('objectstore_type is %s' % osd_type)
assert osd_type
if osd_type == 'filestore':
raise Error('FileStore is not supported by cephadm')
# NOTE: implicit assumption here that the units correspond to the
# cluster we are adopting based on the /etc/{defaults,sysconfig}/ceph
# CLUSTER field.
unit_name = 'ceph-%s@%s' % (daemon_type, daemon_id)
(enabled, state, _) = check_unit(ctx, unit_name)
if state == 'running':
logger.info('Stopping old systemd unit %s...' % unit_name)
call_throws(ctx, ['systemctl', 'stop', unit_name])
if enabled:
logger.info('Disabling old systemd unit %s...' % unit_name)
call_throws(ctx, ['systemctl', 'disable', unit_name])
# data
logger.info('Moving data...')
data_dir_dst = make_data_dir(ctx, fsid, daemon_type, daemon_id,
uid=uid, gid=gid)
move_files(ctx, glob(os.path.join(data_dir_src, '*')),
data_dir_dst,
uid=uid, gid=gid)
logger.debug('Remove dir `%s`' % (data_dir_src))
if os.path.ismount(data_dir_src):
call_throws(ctx, ['umount', data_dir_src])
os.rmdir(data_dir_src)
logger.info('Chowning content...')
call_throws(ctx, ['chown', '-c', '-R', '%d.%d' % (uid, gid), data_dir_dst])
if daemon_type == 'mon':
# rename *.ldb -> *.sst, in case they are coming from ubuntu
store = os.path.join(data_dir_dst, 'store.db')
num_renamed = 0
if os.path.exists(store):
for oldf in os.listdir(store):
if oldf.endswith('.ldb'):
newf = oldf.replace('.ldb', '.sst')
oldp = os.path.join(store, oldf)
newp = os.path.join(store, newf)
logger.debug('Renaming %s -> %s' % (oldp, newp))
os.rename(oldp, newp)
if num_renamed:
logger.info('Renamed %d leveldb *.ldb files to *.sst',
num_renamed)
if daemon_type == 'osd':
for n in ['block', 'block.db', 'block.wal']:
p = os.path.join(data_dir_dst, n)
if os.path.exists(p):
logger.info('Chowning %s...' % p)
os.chown(p, uid, gid)
# disable the ceph-volume 'simple' mode files on the host
simple_fn = os.path.join('/etc/ceph/osd',
'%s-%s.json' % (daemon_id, osd_fsid))
if os.path.exists(simple_fn):
new_fn = simple_fn + '.adopted-by-cephadm'
logger.info('Renaming %s -> %s', simple_fn, new_fn)
os.rename(simple_fn, new_fn)
logger.info('Disabling host unit ceph-volume@ simple unit...')
call(ctx, ['systemctl', 'disable',
'ceph-volume@simple-%s-%s.service' % (daemon_id, osd_fsid)])
else:
# assume this is an 'lvm' c-v for now, but don't error
# out if it's not.
logger.info('Disabling host unit ceph-volume@ lvm unit...')
call(ctx, ['systemctl', 'disable',
'ceph-volume@lvm-%s-%s.service' % (daemon_id, osd_fsid)])
# config
config_src = '/etc/ceph/%s.conf' % (ctx.cluster)
config_src = os.path.abspath(ctx.legacy_dir + config_src)
config_dst = os.path.join(data_dir_dst, 'config')
copy_files(ctx, [config_src], config_dst, uid=uid, gid=gid)
# logs
logger.info('Moving logs...')
log_dir_src = ('/var/log/ceph/%s-%s.%s.log*' %
(ctx.cluster, daemon_type, daemon_id))
log_dir_src = os.path.abspath(ctx.legacy_dir + log_dir_src)
log_dir_dst = make_log_dir(ctx, fsid, uid=uid, gid=gid)
move_files(ctx, glob(log_dir_src),
log_dir_dst,
uid=uid, gid=gid)
logger.info('Creating new units...')
make_var_run(ctx, fsid, uid, gid)
c = get_container(ctx, fsid, daemon_type, daemon_id)
deploy_daemon_units(ctx, fsid, uid, gid, daemon_type, daemon_id, c,
enable=True, # unconditionally enable the new unit
start=(state == 'running' or ctx.force_start),
osd_fsid=osd_fsid)
update_firewalld(ctx, daemon_type)
def command_adopt_prometheus(ctx, daemon_id, fsid):
# type: (CephadmContext, str, str) -> None
daemon_type = 'prometheus'
(uid, gid) = extract_uid_gid_monitoring(ctx, daemon_type)
_stop_and_disable(ctx, 'prometheus')
data_dir_dst = make_data_dir(ctx, fsid, daemon_type, daemon_id,
uid=uid, gid=gid)
# config
config_src = '/etc/prometheus/prometheus.yml'
config_src = os.path.abspath(ctx.legacy_dir + config_src)
config_dst = os.path.join(data_dir_dst, 'etc/prometheus')
makedirs(config_dst, uid, gid, 0o755)
copy_files(ctx, [config_src], config_dst, uid=uid, gid=gid)
# data
data_src = '/var/lib/prometheus/metrics/'
data_src = os.path.abspath(ctx.legacy_dir + data_src)
data_dst = os.path.join(data_dir_dst, 'data')
copy_tree(ctx, [data_src], data_dst, uid=uid, gid=gid)
make_var_run(ctx, fsid, uid, gid)
c = get_container(ctx, fsid, daemon_type, daemon_id)
deploy_daemon(ctx, fsid, daemon_type, daemon_id, c, uid, gid)
update_firewalld(ctx, daemon_type)
def command_adopt_grafana(ctx, daemon_id, fsid):
# type: (CephadmContext, str, str) -> None
daemon_type = 'grafana'
(uid, gid) = extract_uid_gid_monitoring(ctx, daemon_type)
_stop_and_disable(ctx, 'grafana-server')
data_dir_dst = make_data_dir(ctx, fsid, daemon_type, daemon_id,
uid=uid, gid=gid)
# config
config_src = '/etc/grafana/grafana.ini'
config_src = os.path.abspath(ctx.legacy_dir + config_src)
config_dst = os.path.join(data_dir_dst, 'etc/grafana')
makedirs(config_dst, uid, gid, 0o755)
copy_files(ctx, [config_src], config_dst, uid=uid, gid=gid)
prov_src = '/etc/grafana/provisioning/'
prov_src = os.path.abspath(ctx.legacy_dir + prov_src)
prov_dst = os.path.join(data_dir_dst, 'etc/grafana')
copy_tree(ctx, [prov_src], prov_dst, uid=uid, gid=gid)
# cert
cert = '/etc/grafana/grafana.crt'
key = '/etc/grafana/grafana.key'
if os.path.exists(cert) and os.path.exists(key):
cert_src = '/etc/grafana/grafana.crt'
cert_src = os.path.abspath(ctx.legacy_dir + cert_src)
makedirs(os.path.join(data_dir_dst, 'etc/grafana/certs'), uid, gid, 0o755)
cert_dst = os.path.join(data_dir_dst, 'etc/grafana/certs/cert_file')
copy_files(ctx, [cert_src], cert_dst, uid=uid, gid=gid)
key_src = '/etc/grafana/grafana.key'
key_src = os.path.abspath(ctx.legacy_dir + key_src)
key_dst = os.path.join(data_dir_dst, 'etc/grafana/certs/cert_key')
copy_files(ctx, [key_src], key_dst, uid=uid, gid=gid)
_adjust_grafana_ini(os.path.join(config_dst, 'grafana.ini'))
else:
logger.debug('Skipping ssl, missing cert {} or key {}'.format(cert, key))
# data - possible custom dashboards/plugins
data_src = '/var/lib/grafana/'
data_src = os.path.abspath(ctx.legacy_dir + data_src)
data_dst = os.path.join(data_dir_dst, 'data')
copy_tree(ctx, [data_src], data_dst, uid=uid, gid=gid)
make_var_run(ctx, fsid, uid, gid)
c = get_container(ctx, fsid, daemon_type, daemon_id)
deploy_daemon(ctx, fsid, daemon_type, daemon_id, c, uid, gid)
update_firewalld(ctx, daemon_type)
def command_adopt_alertmanager(ctx, daemon_id, fsid):
# type: (CephadmContext, str, str) -> None
daemon_type = 'alertmanager'
(uid, gid) = extract_uid_gid_monitoring(ctx, daemon_type)
_stop_and_disable(ctx, 'prometheus-alertmanager')
data_dir_dst = make_data_dir(ctx, fsid, daemon_type, daemon_id,
uid=uid, gid=gid)
# config
config_src = '/etc/prometheus/alertmanager.yml'
config_src = os.path.abspath(ctx.legacy_dir + config_src)
config_dst = os.path.join(data_dir_dst, 'etc/alertmanager')
makedirs(config_dst, uid, gid, 0o755)
copy_files(ctx, [config_src], config_dst, uid=uid, gid=gid)
# data
data_src = '/var/lib/prometheus/alertmanager/'
data_src = os.path.abspath(ctx.legacy_dir + data_src)
data_dst = os.path.join(data_dir_dst, 'etc/alertmanager/data')
copy_tree(ctx, [data_src], data_dst, uid=uid, gid=gid)
make_var_run(ctx, fsid, uid, gid)
c = get_container(ctx, fsid, daemon_type, daemon_id)
deploy_daemon(ctx, fsid, daemon_type, daemon_id, c, uid, gid)
update_firewalld(ctx, daemon_type)
def _adjust_grafana_ini(filename):
# type: (str) -> None
# Update cert_file, cert_key pathnames in server section
# ConfigParser does not preserve comments
try:
with open(filename, 'r') as grafana_ini:
lines = grafana_ini.readlines()
with open('{}.new'.format(filename), 'w') as grafana_ini:
server_section = False
for line in lines:
if line.startswith('['):
server_section = False
if line.startswith('[server]'):
server_section = True
if server_section:
line = re.sub(r'^cert_file.*',
'cert_file = /etc/grafana/certs/cert_file', line)
line = re.sub(r'^cert_key.*',
'cert_key = /etc/grafana/certs/cert_key', line)
grafana_ini.write(line)
os.rename('{}.new'.format(filename), filename)
except OSError as err:
raise Error('Cannot update {}: {}'.format(filename, err))
def _stop_and_disable(ctx, unit_name):
# type: (CephadmContext, str) -> None
(enabled, state, _) = check_unit(ctx, unit_name)
if state == 'running':
logger.info('Stopping old systemd unit %s...' % unit_name)
call_throws(ctx, ['systemctl', 'stop', unit_name])
if enabled:
logger.info('Disabling old systemd unit %s...' % unit_name)
call_throws(ctx, ['systemctl', 'disable', unit_name])
##################################
def command_rm_daemon(ctx):
# type: (CephadmContext) -> None
lock = FileLock(ctx, ctx.fsid)
lock.acquire()
(daemon_type, daemon_id) = ctx.name.split('.', 1)
unit_name = get_unit_name_by_daemon_name(ctx, ctx.fsid, ctx.name)
if daemon_type in ['mon', 'osd'] and not ctx.force:
raise Error('must pass --force to proceed: '
'this command may destroy precious data!')
call(ctx, ['systemctl', 'stop', unit_name],
verbosity=CallVerbosity.DEBUG)
call(ctx, ['systemctl', 'reset-failed', unit_name],
verbosity=CallVerbosity.DEBUG)
call(ctx, ['systemctl', 'disable', unit_name],
verbosity=CallVerbosity.DEBUG)
data_dir = get_data_dir(ctx.fsid, ctx.data_dir, daemon_type, daemon_id)
if daemon_type in ['mon', 'osd', 'prometheus'] and \
not ctx.force_delete_data:
# rename it out of the way -- do not delete
backup_dir = os.path.join(ctx.data_dir, ctx.fsid, 'removed')
if not os.path.exists(backup_dir):
makedirs(backup_dir, 0, 0, DATA_DIR_MODE)
dirname = '%s.%s_%s' % (daemon_type, daemon_id,
datetime.datetime.utcnow().strftime(DATEFMT))
os.rename(data_dir,
os.path.join(backup_dir, dirname))
else:
call_throws(ctx, ['rm', '-rf', data_dir])
##################################
def _zap(ctx: CephadmContext, what: str) -> None:
mounts = get_container_mounts(ctx, ctx.fsid, 'clusterless-ceph-volume', None)
c = get_ceph_volume_container(ctx,
args=['lvm', 'zap', '--destroy', what],
volume_mounts=mounts,
envs=ctx.env)
logger.info(f'Zapping {what}...')
out, err, code = call_throws(ctx, c.run_cmd())
@infer_image
def _zap_osds(ctx: CephadmContext) -> None:
# assume fsid lock already held
# list
mounts = get_container_mounts(ctx, ctx.fsid, 'clusterless-ceph-volume', None)
c = get_ceph_volume_container(ctx,
args=['inventory', '--format', 'json'],
volume_mounts=mounts,
envs=ctx.env)
out, err, code = call_throws(ctx, c.run_cmd())
if code:
raise Error('failed to list osd inventory')
try:
ls = json.loads(out)
except ValueError as e:
raise Error(f'Invalid JSON in ceph-volume inventory: {e}')
for i in ls:
matches = [lv.get('cluster_fsid') == ctx.fsid for lv in i.get('lvs', [])]
if any(matches) and all(matches):
_zap(ctx, i.get('path'))
elif any(matches):
lv_names = [lv['name'] for lv in i.get('lvs', [])]
# TODO: we need to map the lv_names back to device paths (the vg
# id isn't part of the output here!)
logger.warning(f'Not zapping LVs (not implemented): {lv_names}')
def command_zap_osds(ctx: CephadmContext) -> None:
if not ctx.force:
raise Error('must pass --force to proceed: '
'this command may destroy precious data!')
lock = FileLock(ctx, ctx.fsid)
lock.acquire()
_zap_osds(ctx)
##################################
def command_rm_cluster(ctx):
# type: (CephadmContext) -> None
if not ctx.force:
raise Error('must pass --force to proceed: '
'this command may destroy precious data!')
lock = FileLock(ctx, ctx.fsid)
lock.acquire()
# stop + disable individual daemon units
for d in list_daemons(ctx, detail=False):
if d['fsid'] != ctx.fsid:
continue
if d['style'] != 'cephadm:v1':
continue
unit_name = get_unit_name(ctx.fsid, d['name'])
call(ctx, ['systemctl', 'stop', unit_name],
verbosity=CallVerbosity.DEBUG)
call(ctx, ['systemctl', 'reset-failed', unit_name],
verbosity=CallVerbosity.DEBUG)
call(ctx, ['systemctl', 'disable', unit_name],
verbosity=CallVerbosity.DEBUG)
# cluster units
for unit_name in ['ceph-%s.target' % ctx.fsid]:
call(ctx, ['systemctl', 'stop', unit_name],
verbosity=CallVerbosity.DEBUG)
call(ctx, ['systemctl', 'reset-failed', unit_name],
verbosity=CallVerbosity.DEBUG)
call(ctx, ['systemctl', 'disable', unit_name],
verbosity=CallVerbosity.DEBUG)
slice_name = 'system-ceph\\x2d{}.slice'.format(ctx.fsid.replace('-', '\\x2d'))
call(ctx, ['systemctl', 'stop', slice_name],
verbosity=CallVerbosity.DEBUG)
# osds?
if ctx.zap_osds:
_zap_osds(ctx)
# rm units
call_throws(ctx, ['rm', '-f', ctx.unit_dir
+ '/ceph-%s@.service' % ctx.fsid])
call_throws(ctx, ['rm', '-f', ctx.unit_dir
+ '/ceph-%s.target' % ctx.fsid])
call_throws(ctx, ['rm', '-rf',
ctx.unit_dir + '/ceph-%s.target.wants' % ctx.fsid])
# rm data
call_throws(ctx, ['rm', '-rf', ctx.data_dir + '/' + ctx.fsid])
if not ctx.keep_logs:
# rm logs
call_throws(ctx, ['rm', '-rf', ctx.log_dir + '/' + ctx.fsid])
call_throws(ctx, ['rm', '-rf', ctx.log_dir
+ '/*.wants/ceph-%s@*' % ctx.fsid])
# rm logrotate config
call_throws(ctx, ['rm', '-f', ctx.logrotate_dir + '/ceph-%s' % ctx.fsid])
# rm cephadm logrotate config if last cluster on host
if not os.listdir(ctx.data_dir):
call_throws(ctx, ['rm', '-f', ctx.logrotate_dir + '/cephadm'])
# rm sysctl settings
sysctl_dir = Path(ctx.sysctl_dir)
for p in sysctl_dir.glob(f'90-ceph-{ctx.fsid}-*.conf'):
p.unlink()
# clean up config, keyring, and pub key files
files = ['/etc/ceph/ceph.conf', '/etc/ceph/ceph.pub', '/etc/ceph/ceph.client.admin.keyring']
if os.path.exists(files[0]):
valid_fsid = False
with open(files[0]) as f:
if ctx.fsid in f.read():
valid_fsid = True
if valid_fsid:
for n in range(0, len(files)):
if os.path.exists(files[n]):
os.remove(files[n])
##################################
def check_time_sync(ctx, enabler=None):
# type: (CephadmContext, Optional[Packager]) -> bool
units = [
'chrony.service', # 18.04 (at least)
'chronyd.service', # el / opensuse
'systemd-timesyncd.service',
'ntpd.service', # el7 (at least)
'ntp.service', # 18.04 (at least)
'ntpsec.service', # 20.04 (at least) / buster
'openntpd.service', # ubuntu / debian
]
if not check_units(ctx, units, enabler):
logger.warning('No time sync service is running; checked for %s' % units)
return False
return True
def command_check_host(ctx: CephadmContext) -> None:
errors = []
commands = ['systemctl', 'lvcreate']
try:
engine = check_container_engine(ctx)
logger.info(f'{engine} is present')
except Error as e:
errors.append(str(e))
for command in commands:
try:
find_program(command)
logger.info('%s is present' % command)
except ValueError:
errors.append('%s binary does not appear to be installed' % command)
# check for configured+running chronyd or ntp
if not check_time_sync(ctx):
errors.append('No time synchronization is active')
if 'expect_hostname' in ctx and ctx.expect_hostname:
if get_hostname().lower() != ctx.expect_hostname.lower():
errors.append('hostname "%s" does not match expected hostname "%s"' % (
get_hostname(), ctx.expect_hostname))
else:
logger.info('Hostname "%s" matches what is expected.',
ctx.expect_hostname)
if errors:
raise Error('\nERROR: '.join(errors))
logger.info('Host looks OK')
##################################
def command_prepare_host(ctx: CephadmContext) -> None:
logger.info('Verifying podman|docker is present...')
pkg = None
try:
check_container_engine(ctx)
except Error as e:
logger.warning(str(e))
if not pkg:
pkg = create_packager(ctx)
pkg.install_podman()
logger.info('Verifying lvm2 is present...')
if not find_executable('lvcreate'):
if not pkg:
pkg = create_packager(ctx)
pkg.install(['lvm2'])
logger.info('Verifying time synchronization is in place...')
if not check_time_sync(ctx):
if not pkg:
pkg = create_packager(ctx)
pkg.install(['chrony'])
# check again, and this time try to enable
# the service
check_time_sync(ctx, enabler=pkg)
if 'expect_hostname' in ctx and ctx.expect_hostname and ctx.expect_hostname != get_hostname():
logger.warning('Adjusting hostname from %s -> %s...' % (get_hostname(), ctx.expect_hostname))
call_throws(ctx, ['hostname', ctx.expect_hostname])
with open('/etc/hostname', 'w') as f:
f.write(ctx.expect_hostname + '\n')
logger.info('Repeating the final host check...')
command_check_host(ctx)
##################################
class CustomValidation(argparse.Action):
def _check_name(self, values: str) -> None:
try:
(daemon_type, daemon_id) = values.split('.', 1)
except ValueError:
raise argparse.ArgumentError(self,
'must be of the format .. For example, osd.1 or prometheus.myhost.com')
daemons = get_supported_daemons()
if daemon_type not in daemons:
raise argparse.ArgumentError(self,
'name must declare the type of daemon e.g. '
'{}'.format(', '.join(daemons)))
def __call__(self, parser: argparse.ArgumentParser, namespace: argparse.Namespace, values: Union[str, Sequence[Any], None],
option_string: Optional[str] = None) -> None:
assert isinstance(values, str)
if self.dest == 'name':
self._check_name(values)
setattr(namespace, self.dest, values)
##################################
def get_distro():
# type: () -> Tuple[Optional[str], Optional[str], Optional[str]]
distro = None
distro_version = None
distro_codename = None
with open('/etc/os-release', 'r') as f:
for line in f.readlines():
line = line.strip()
if '=' not in line or line.startswith('#'):
continue
(var, val) = line.split('=', 1)
if val[0] == '"' and val[-1] == '"':
val = val[1:-1]
if var == 'ID':
distro = val.lower()
elif var == 'VERSION_ID':
distro_version = val.lower()
elif var == 'VERSION_CODENAME':
distro_codename = val.lower()
return distro, distro_version, distro_codename
class Packager(object):
def __init__(self, ctx: CephadmContext,
stable: Optional[str] = None, version: Optional[str] = None,
branch: Optional[str] = None, commit: Optional[str] = None):
assert \
(stable and not version and not branch and not commit) or \
(not stable and version and not branch and not commit) or \
(not stable and not version and branch) or \
(not stable and not version and not branch and not commit)
self.ctx = ctx
self.stable = stable
self.version = version
self.branch = branch
self.commit = commit
def validate(self) -> None:
"""Validate parameters before writing any state to disk."""
pass
def add_repo(self) -> None:
raise NotImplementedError
def rm_repo(self) -> None:
raise NotImplementedError
def install(self, ls: List[str]) -> None:
raise NotImplementedError
def install_podman(self) -> None:
raise NotImplementedError
def query_shaman(self, distro: str, distro_version: Any, branch: Optional[str], commit: Optional[str]) -> str:
# query shaman
logger.info('Fetching repo metadata from shaman and chacra...')
shaman_url = 'https://shaman.ceph.com/api/repos/ceph/{branch}/{sha1}/{distro}/{distro_version}/repo/?arch={arch}'.format(
distro=distro,
distro_version=distro_version,
branch=branch,
sha1=commit or 'latest',
arch=get_arch()
)
try:
shaman_response = urlopen(shaman_url)
except HTTPError as err:
logger.error('repository not found in shaman (might not be available yet)')
raise Error('%s, failed to fetch %s' % (err, shaman_url))
chacra_url = ''
try:
chacra_url = shaman_response.geturl()
chacra_response = urlopen(chacra_url)
except HTTPError as err:
logger.error('repository not found in chacra (might not be available yet)')
raise Error('%s, failed to fetch %s' % (err, chacra_url))
return chacra_response.read().decode('utf-8')
def repo_gpgkey(self) -> Tuple[str, str]:
if self.ctx.gpg_url:
return self.ctx.gpg_url
if self.stable or self.version:
return 'https://download.ceph.com/keys/release.gpg', 'release'
else:
return 'https://download.ceph.com/keys/autobuild.gpg', 'autobuild'
def enable_service(self, service: str) -> None:
"""
Start and enable the service (typically using systemd).
"""
call_throws(self.ctx, ['systemctl', 'enable', '--now', service])
class Apt(Packager):
DISTRO_NAMES = {
'ubuntu': 'ubuntu',
'debian': 'debian',
}
def __init__(self, ctx: CephadmContext,
stable: Optional[str], version: Optional[str], branch: Optional[str], commit: Optional[str],
distro: Optional[str], distro_version: Optional[str], distro_codename: Optional[str]) -> None:
super(Apt, self).__init__(ctx, stable=stable, version=version,
branch=branch, commit=commit)
assert distro
self.ctx = ctx
self.distro = self.DISTRO_NAMES[distro]
self.distro_codename = distro_codename
self.distro_version = distro_version
def repo_path(self) -> str:
return '/etc/apt/sources.list.d/ceph.list'
def add_repo(self) -> None:
url, name = self.repo_gpgkey()
logger.info('Installing repo GPG key from %s...' % url)
try:
response = urlopen(url)
except HTTPError as err:
logger.error('failed to fetch GPG repo key from %s: %s' % (
url, err))
raise Error('failed to fetch GPG key')
key = response.read()
with open('/etc/apt/trusted.gpg.d/ceph.%s.gpg' % name, 'wb') as f:
f.write(key)
if self.version:
content = 'deb %s/debian-%s/ %s main\n' % (
self.ctx.repo_url, self.version, self.distro_codename)
elif self.stable:
content = 'deb %s/debian-%s/ %s main\n' % (
self.ctx.repo_url, self.stable, self.distro_codename)
else:
content = self.query_shaman(self.distro, self.distro_codename, self.branch,
self.commit)
logger.info('Installing repo file at %s...' % self.repo_path())
with open(self.repo_path(), 'w') as f:
f.write(content)
self.update()
def rm_repo(self) -> None:
for name in ['autobuild', 'release']:
p = '/etc/apt/trusted.gpg.d/ceph.%s.gpg' % name
if os.path.exists(p):
logger.info('Removing repo GPG key %s...' % p)
os.unlink(p)
if os.path.exists(self.repo_path()):
logger.info('Removing repo at %s...' % self.repo_path())
os.unlink(self.repo_path())
if self.distro == 'ubuntu':
self.rm_kubic_repo()
def install(self, ls: List[str]) -> None:
logger.info('Installing packages %s...' % ls)
call_throws(self.ctx, ['apt-get', 'install', '-y'] + ls)
def update(self) -> None:
logger.info('Updating package list...')
call_throws(self.ctx, ['apt-get', 'update'])
def install_podman(self) -> None:
if self.distro == 'ubuntu':
logger.info('Setting up repo for podman...')
self.add_kubic_repo()
self.update()
logger.info('Attempting podman install...')
try:
self.install(['podman'])
except Error:
logger.info('Podman did not work. Falling back to docker...')
self.install(['docker.io'])
def kubic_repo_url(self) -> str:
return 'https://download.opensuse.org/repositories/devel:/kubic:/' \
'libcontainers:/stable/xUbuntu_%s/' % self.distro_version
def kubic_repo_path(self) -> str:
return '/etc/apt/sources.list.d/devel:kubic:libcontainers:stable.list'
def kubric_repo_gpgkey_url(self) -> str:
return '%s/Release.key' % self.kubic_repo_url()
def kubric_repo_gpgkey_path(self) -> str:
return '/etc/apt/trusted.gpg.d/kubic.release.gpg'
def add_kubic_repo(self) -> None:
url = self.kubric_repo_gpgkey_url()
logger.info('Installing repo GPG key from %s...' % url)
try:
response = urlopen(url)
except HTTPError as err:
logger.error('failed to fetch GPG repo key from %s: %s' % (
url, err))
raise Error('failed to fetch GPG key')
key = response.read().decode('utf-8')
tmp_key = write_tmp(key, 0, 0)
keyring = self.kubric_repo_gpgkey_path()
call_throws(self.ctx, ['apt-key', '--keyring', keyring, 'add', tmp_key.name])
logger.info('Installing repo file at %s...' % self.kubic_repo_path())
content = 'deb %s /\n' % self.kubic_repo_url()
with open(self.kubic_repo_path(), 'w') as f:
f.write(content)
def rm_kubic_repo(self) -> None:
keyring = self.kubric_repo_gpgkey_path()
if os.path.exists(keyring):
logger.info('Removing repo GPG key %s...' % keyring)
os.unlink(keyring)
p = self.kubic_repo_path()
if os.path.exists(p):
logger.info('Removing repo at %s...' % p)
os.unlink(p)
class YumDnf(Packager):
DISTRO_NAMES = {
'centos': ('centos', 'el'),
'rhel': ('centos', 'el'),
'scientific': ('centos', 'el'),
'rocky': ('centos', 'el'),
'almalinux': ('centos', 'el'),
'fedora': ('fedora', 'fc'),
'mariner': ('mariner', 'cm'),
}
def __init__(self, ctx: CephadmContext,
stable: Optional[str], version: Optional[str], branch: Optional[str], commit: Optional[str],
distro: Optional[str], distro_version: Optional[str]) -> None:
super(YumDnf, self).__init__(ctx, stable=stable, version=version,
branch=branch, commit=commit)
assert distro
assert distro_version
self.ctx = ctx
self.major = int(distro_version.split('.')[0])
self.distro_normalized = self.DISTRO_NAMES[distro][0]
self.distro_code = self.DISTRO_NAMES[distro][1] + str(self.major)
if (self.distro_code == 'fc' and self.major >= 30) or \
(self.distro_code == 'el' and self.major >= 8):
self.tool = 'dnf'
elif (self.distro_code == 'cm'):
self.tool = 'tdnf'
else:
self.tool = 'yum'
def custom_repo(self, **kw: Any) -> str:
"""
Repo files need special care in that a whole line should not be present
if there is no value for it. Because we were using `format()` we could
not conditionally add a line for a repo file. So the end result would
contain a key with a missing value (say if we were passing `None`).
For example, it could look like::
[ceph repo]
name= ceph repo
proxy=
gpgcheck=
Which breaks. This function allows us to conditionally add lines,
preserving an order and be more careful.
Previously, and for historical purposes, this is how the template used
to look::
custom_repo =
[{repo_name}]
name={name}
baseurl={baseurl}
enabled={enabled}
gpgcheck={gpgcheck}
type={_type}
gpgkey={gpgkey}
proxy={proxy}
"""
lines = []
# by using tuples (vs a dict) we preserve the order of what we want to
# return, like starting with a [repo name]
tmpl = (
('reponame', '[%s]'),
('name', 'name=%s'),
('baseurl', 'baseurl=%s'),
('enabled', 'enabled=%s'),
('gpgcheck', 'gpgcheck=%s'),
('_type', 'type=%s'),
('gpgkey', 'gpgkey=%s'),
('proxy', 'proxy=%s'),
('priority', 'priority=%s'),
)
for line in tmpl:
tmpl_key, tmpl_value = line # key values from tmpl
# ensure that there is an actual value (not None nor empty string)
if tmpl_key in kw and kw.get(tmpl_key) not in (None, ''):
lines.append(tmpl_value % kw.get(tmpl_key))
return '\n'.join(lines)
def repo_path(self) -> str:
return '/etc/yum.repos.d/ceph.repo'
def repo_baseurl(self) -> str:
assert self.stable or self.version
if self.version:
return '%s/rpm-%s/%s' % (self.ctx.repo_url, self.version,
self.distro_code)
else:
return '%s/rpm-%s/%s' % (self.ctx.repo_url, self.stable,
self.distro_code)
def validate(self) -> None:
if self.distro_code.startswith('fc'):
raise Error('Ceph team does not build Fedora specific packages and therefore cannot add repos for this distro')
if self.distro_code == 'el7':
if self.stable and self.stable >= 'pacific':
raise Error('Ceph does not support pacific or later for this version of this linux distro and therefore cannot add a repo for it')
if self.version and self.version.split('.')[0] >= '16':
raise Error('Ceph does not support 16.y.z or later for this version of this linux distro and therefore cannot add a repo for it')
if self.stable or self.version:
# we know that yum & dnf require there to be a
# $base_url/$arch/repodata/repomd.xml so we can test if this URL
# is gettable in order to validate the inputs
test_url = self.repo_baseurl() + '/noarch/repodata/repomd.xml'
try:
urlopen(test_url)
except HTTPError as err:
logger.error('unable to fetch repo metadata: %r', err)
raise Error('failed to fetch repository metadata. please check'
' the provided parameters are correct and try again')
def add_repo(self) -> None:
if self.stable or self.version:
content = ''
for n, t in {
'Ceph': '$basearch',
'Ceph-noarch': 'noarch',
'Ceph-source': 'SRPMS'}.items():
content += '[%s]\n' % (n)
content += self.custom_repo(
name='Ceph %s' % t,
baseurl=self.repo_baseurl() + '/' + t,
enabled=1,
gpgcheck=1,
gpgkey=self.repo_gpgkey()[0],
)
content += '\n\n'
else:
content = self.query_shaman(self.distro_normalized, self.major,
self.branch,
self.commit)
logger.info('Writing repo to %s...' % self.repo_path())
with open(self.repo_path(), 'w') as f:
f.write(content)
if self.distro_code.startswith('el'):
logger.info('Enabling EPEL...')
call_throws(self.ctx, [self.tool, 'install', '-y', 'epel-release'])
def rm_repo(self) -> None:
if os.path.exists(self.repo_path()):
os.unlink(self.repo_path())
def install(self, ls: List[str]) -> None:
logger.info('Installing packages %s...' % ls)
call_throws(self.ctx, [self.tool, 'install', '-y'] + ls)
def install_podman(self) -> None:
self.install(['podman'])
class Zypper(Packager):
DISTRO_NAMES = [
'sles',
'opensuse-tumbleweed',
'opensuse-leap'
]
def __init__(self, ctx: CephadmContext,
stable: Optional[str], version: Optional[str], branch: Optional[str], commit: Optional[str],
distro: Optional[str], distro_version: Optional[str]) -> None:
super(Zypper, self).__init__(ctx, stable=stable, version=version,
branch=branch, commit=commit)
assert distro is not None
self.ctx = ctx
self.tool = 'zypper'
self.distro = 'opensuse'
self.distro_version = '15.1'
if 'tumbleweed' not in distro and distro_version is not None:
self.distro_version = distro_version
def custom_repo(self, **kw: Any) -> str:
"""
See YumDnf for format explanation.
"""
lines = []
# by using tuples (vs a dict) we preserve the order of what we want to
# return, like starting with a [repo name]
tmpl = (
('reponame', '[%s]'),
('name', 'name=%s'),
('baseurl', 'baseurl=%s'),
('enabled', 'enabled=%s'),
('gpgcheck', 'gpgcheck=%s'),
('_type', 'type=%s'),
('gpgkey', 'gpgkey=%s'),
('proxy', 'proxy=%s'),
('priority', 'priority=%s'),
)
for line in tmpl:
tmpl_key, tmpl_value = line # key values from tmpl
# ensure that there is an actual value (not None nor empty string)
if tmpl_key in kw and kw.get(tmpl_key) not in (None, ''):
lines.append(tmpl_value % kw.get(tmpl_key))
return '\n'.join(lines)
def repo_path(self) -> str:
return '/etc/zypp/repos.d/ceph.repo'
def repo_baseurl(self) -> str:
assert self.stable or self.version
if self.version:
return '%s/rpm-%s/%s' % (self.ctx.repo_url,
self.stable, self.distro)
else:
return '%s/rpm-%s/%s' % (self.ctx.repo_url,
self.stable, self.distro)
def add_repo(self) -> None:
if self.stable or self.version:
content = ''
for n, t in {
'Ceph': '$basearch',
'Ceph-noarch': 'noarch',
'Ceph-source': 'SRPMS'}.items():
content += '[%s]\n' % (n)
content += self.custom_repo(
name='Ceph %s' % t,
baseurl=self.repo_baseurl() + '/' + t,
enabled=1,
gpgcheck=1,
gpgkey=self.repo_gpgkey()[0],
)
content += '\n\n'
else:
content = self.query_shaman(self.distro, self.distro_version,
self.branch,
self.commit)
logger.info('Writing repo to %s...' % self.repo_path())
with open(self.repo_path(), 'w') as f:
f.write(content)
def rm_repo(self) -> None:
if os.path.exists(self.repo_path()):
os.unlink(self.repo_path())
def install(self, ls: List[str]) -> None:
logger.info('Installing packages %s...' % ls)
call_throws(self.ctx, [self.tool, 'in', '-y'] + ls)
def install_podman(self) -> None:
self.install(['podman'])
def create_packager(ctx: CephadmContext,
stable: Optional[str] = None, version: Optional[str] = None,
branch: Optional[str] = None, commit: Optional[str] = None) -> Packager:
distro, distro_version, distro_codename = get_distro()
if distro in YumDnf.DISTRO_NAMES:
return YumDnf(ctx, stable=stable, version=version,
branch=branch, commit=commit,
distro=distro, distro_version=distro_version)
elif distro in Apt.DISTRO_NAMES:
return Apt(ctx, stable=stable, version=version,
branch=branch, commit=commit,
distro=distro, distro_version=distro_version,
distro_codename=distro_codename)
elif distro in Zypper.DISTRO_NAMES:
return Zypper(ctx, stable=stable, version=version,
branch=branch, commit=commit,
distro=distro, distro_version=distro_version)
raise Error('Distro %s version %s not supported' % (distro, distro_version))
def command_add_repo(ctx: CephadmContext) -> None:
if ctx.version and ctx.release:
raise Error('you can specify either --release or --version but not both')
if not ctx.version and not ctx.release and not ctx.dev and not ctx.dev_commit:
raise Error('please supply a --release, --version, --dev or --dev-commit argument')
if ctx.version:
try:
(x, y, z) = ctx.version.split('.')
except Exception:
raise Error('version must be in the form x.y.z (e.g., 15.2.0)')
if ctx.release:
# Pacific =/= pacific in this case, set to undercase to avoid confision
ctx.release = ctx.release.lower()
pkg = create_packager(ctx, stable=ctx.release,
version=ctx.version,
branch=ctx.dev,
commit=ctx.dev_commit)
pkg.validate()
pkg.add_repo()
logger.info('Completed adding repo.')
def command_rm_repo(ctx: CephadmContext) -> None:
pkg = create_packager(ctx)
pkg.rm_repo()
def command_install(ctx: CephadmContext) -> None:
pkg = create_packager(ctx)
pkg.install(ctx.packages)
##################################
def get_ipv4_address(ifname):
# type: (str) -> str
def _extract(sock: socket.socket, offset: int) -> str:
return socket.inet_ntop(
socket.AF_INET,
fcntl.ioctl(
sock.fileno(),
offset,
struct.pack('256s', bytes(ifname[:15], 'utf-8'))
)[20:24])
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
try:
addr = _extract(s, 35093) # '0x8915' = SIOCGIFADDR
dq_mask = _extract(s, 35099) # 0x891b = SIOCGIFNETMASK
except OSError:
# interface does not have an ipv4 address
return ''
dec_mask = sum([bin(int(i)).count('1')
for i in dq_mask.split('.')])
return '{}/{}'.format(addr, dec_mask)
def get_ipv6_address(ifname):
# type: (str) -> str
if not os.path.exists('/proc/net/if_inet6'):
return ''
raw = read_file(['/proc/net/if_inet6'])
data = raw.splitlines()
# based on docs @ https://www.tldp.org/HOWTO/Linux+IPv6-HOWTO/ch11s04.html
# field 0 is ipv6, field 2 is scope
for iface_setting in data:
field = iface_setting.split()
if field[-1] == ifname:
ipv6_raw = field[0]
ipv6_fmtd = ':'.join([ipv6_raw[_p:_p + 4] for _p in range(0, len(field[0]), 4)])
# apply naming rules using ipaddress module
ipv6 = ipaddress.ip_address(ipv6_fmtd)
return '{}/{}'.format(str(ipv6), int('0x{}'.format(field[2]), 16))
return ''
def bytes_to_human(num, mode='decimal'):
# type: (float, str) -> str
"""Convert a bytes value into it's human-readable form.
:param num: number, in bytes, to convert
:param mode: Either decimal (default) or binary to determine divisor
:returns: string representing the bytes value in a more readable format
"""
unit_list = ['', 'KB', 'MB', 'GB', 'TB', 'PB', 'EB', 'ZB']
divisor = 1000.0
yotta = 'YB'
if mode == 'binary':
unit_list = ['', 'KiB', 'MiB', 'GiB', 'TiB', 'PiB', 'EiB', 'ZiB']
divisor = 1024.0
yotta = 'YiB'
for unit in unit_list:
if abs(num) < divisor:
return '%3.1f%s' % (num, unit)
num /= divisor
return '%.1f%s' % (num, yotta)
def read_file(path_list, file_name=''):
# type: (List[str], str) -> str
"""Returns the content of the first file found within the `path_list`
:param path_list: list of file paths to search
:param file_name: optional file_name to be applied to a file path
:returns: content of the file or 'Unknown'
"""
for path in path_list:
if file_name:
file_path = os.path.join(path, file_name)
else:
file_path = path
if os.path.exists(file_path):
with open(file_path, 'r') as f:
try:
content = f.read().strip()
except OSError:
# sysfs may populate the file, but for devices like
# virtio reads can fail
return 'Unknown'
else:
return content
return 'Unknown'
##################################
class HostFacts():
_dmi_path_list = ['/sys/class/dmi/id']
_nic_path_list = ['/sys/class/net']
_apparmor_path_list = ['/etc/apparmor']
_disk_vendor_workarounds = {
'0x1af4': 'Virtio Block Device'
}
_excluded_block_devices = ('sr', 'zram', 'dm-')
def __init__(self, ctx: CephadmContext):
self.ctx: CephadmContext = ctx
self.cpu_model: str = 'Unknown'
self.cpu_count: int = 0
self.cpu_cores: int = 0
self.cpu_threads: int = 0
self.interfaces: Dict[str, Any] = {}
self._meminfo: List[str] = read_file(['/proc/meminfo']).splitlines()
self._get_cpuinfo()
self._process_nics()
self.arch: str = platform.processor()
self.kernel: str = platform.release()
def _get_cpuinfo(self):
# type: () -> None
"""Determine cpu information via /proc/cpuinfo"""
raw = read_file(['/proc/cpuinfo'])
output = raw.splitlines()
cpu_set = set()
for line in output:
field = [f.strip() for f in line.split(':')]
if 'model name' in line:
self.cpu_model = field[1]
if 'physical id' in line:
cpu_set.add(field[1])
if 'siblings' in line:
self.cpu_threads = int(field[1].strip())
if 'cpu cores' in line:
self.cpu_cores = int(field[1].strip())
pass
self.cpu_count = len(cpu_set)
def _get_block_devs(self):
# type: () -> List[str]
"""Determine the list of block devices by looking at /sys/block"""
return [dev for dev in os.listdir('/sys/block')
if not dev.startswith(HostFacts._excluded_block_devices)]
def _get_devs_by_type(self, rota='0'):
# type: (str) -> List[str]
"""Filter block devices by a given rotational attribute (0=flash, 1=spinner)"""
devs = list()
for blk_dev in self._get_block_devs():
rot_path = '/sys/block/{}/queue/rotational'.format(blk_dev)
rot_value = read_file([rot_path])
if rot_value == rota:
devs.append(blk_dev)
return devs
@property
def operating_system(self):
# type: () -> str
"""Determine OS version"""
raw_info = read_file(['/etc/os-release'])
os_release = raw_info.splitlines()
rel_str = 'Unknown'
rel_dict = dict()
for line in os_release:
if '=' in line:
var_name, var_value = line.split('=')
rel_dict[var_name] = var_value.strip('"')
# Would normally use PRETTY_NAME, but NAME and VERSION are more
# consistent
if all(_v in rel_dict for _v in ['NAME', 'VERSION']):
rel_str = '{} {}'.format(rel_dict['NAME'], rel_dict['VERSION'])
return rel_str
@property
def hostname(self):
# type: () -> str
"""Return the hostname"""
return platform.node()
@property
def subscribed(self):
# type: () -> str
"""Highlevel check to see if the host is subscribed to receive updates/support"""
def _red_hat():
# type: () -> str
# RHEL 7 and RHEL 8
entitlements_dir = '/etc/pki/entitlement'
if os.path.exists(entitlements_dir):
pems = glob('{}/*.pem'.format(entitlements_dir))
if len(pems) >= 2:
return 'Yes'
return 'No'
os_name = self.operating_system
if os_name.upper().startswith('RED HAT'):
return _red_hat()
return 'Unknown'
@property
def hdd_count(self):
# type: () -> int
"""Return a count of HDDs (spinners)"""
return len(self._get_devs_by_type(rota='1'))
def _get_capacity(self, dev):
# type: (str) -> int
"""Determine the size of a given device"""
size_path = os.path.join('/sys/block', dev, 'size')
size_blocks = int(read_file([size_path]))
blk_path = os.path.join('/sys/block', dev, 'queue', 'logical_block_size')
blk_count = int(read_file([blk_path]))
return size_blocks * blk_count
def _get_capacity_by_type(self, rota='0'):
# type: (str) -> int
"""Return the total capacity of a category of device (flash or hdd)"""
devs = self._get_devs_by_type(rota=rota)
capacity = 0
for dev in devs:
capacity += self._get_capacity(dev)
return capacity
def _dev_list(self, dev_list):
# type: (List[str]) -> List[Dict[str, object]]
"""Return a 'pretty' name list for each device in the `dev_list`"""
disk_list = list()
for dev in dev_list:
disk_model = read_file(['/sys/block/{}/device/model'.format(dev)]).strip()
disk_rev = read_file(['/sys/block/{}/device/rev'.format(dev)]).strip()
disk_wwid = read_file(['/sys/block/{}/device/wwid'.format(dev)]).strip()
vendor = read_file(['/sys/block/{}/device/vendor'.format(dev)]).strip()
disk_vendor = HostFacts._disk_vendor_workarounds.get(vendor, vendor)
disk_size_bytes = self._get_capacity(dev)
disk_list.append({
'description': '{} {} ({})'.format(disk_vendor, disk_model, bytes_to_human(disk_size_bytes)),
'vendor': disk_vendor,
'model': disk_model,
'rev': disk_rev,
'wwid': disk_wwid,
'dev_name': dev,
'disk_size_bytes': disk_size_bytes,
})
return disk_list
@property
def hdd_list(self):
# type: () -> List[Dict[str, object]]
"""Return a list of devices that are HDDs (spinners)"""
devs = self._get_devs_by_type(rota='1')
return self._dev_list(devs)
@property
def flash_list(self):
# type: () -> List[Dict[str, object]]
"""Return a list of devices that are flash based (SSD, NVMe)"""
devs = self._get_devs_by_type(rota='0')
return self._dev_list(devs)
@property
def hdd_capacity_bytes(self):
# type: () -> int
"""Return the total capacity for all HDD devices (bytes)"""
return self._get_capacity_by_type(rota='1')
@property
def hdd_capacity(self):
# type: () -> str
"""Return the total capacity for all HDD devices (human readable format)"""
return bytes_to_human(self.hdd_capacity_bytes)
@property
def cpu_load(self):
# type: () -> Dict[str, float]
"""Return the cpu load average data for the host"""
raw = read_file(['/proc/loadavg']).strip()
data = raw.split()
return {
'1min': float(data[0]),
'5min': float(data[1]),
'15min': float(data[2]),
}
@property
def flash_count(self):
# type: () -> int
"""Return the number of flash devices in the system (SSD, NVMe)"""
return len(self._get_devs_by_type(rota='0'))
@property
def flash_capacity_bytes(self):
# type: () -> int
"""Return the total capacity for all flash devices (bytes)"""
return self._get_capacity_by_type(rota='0')
@property
def flash_capacity(self):
# type: () -> str
"""Return the total capacity for all Flash devices (human readable format)"""
return bytes_to_human(self.flash_capacity_bytes)
def _process_nics(self):
# type: () -> None
"""Look at the NIC devices and extract network related metadata"""
# from https://github.com/torvalds/linux/blob/master/include/uapi/linux/if_arp.h
hw_lookup = {
'1': 'ethernet',
'32': 'infiniband',
'772': 'loopback',
}
for nic_path in HostFacts._nic_path_list:
if not os.path.exists(nic_path):
continue
for iface in os.listdir(nic_path):
lower_devs_list = [os.path.basename(link.replace('lower_', '')) for link in glob(os.path.join(nic_path, iface, 'lower_*'))]
upper_devs_list = [os.path.basename(link.replace('upper_', '')) for link in glob(os.path.join(nic_path, iface, 'upper_*'))]
try:
mtu = int(read_file([os.path.join(nic_path, iface, 'mtu')]))
except ValueError:
mtu = 0
operstate = read_file([os.path.join(nic_path, iface, 'operstate')])
try:
speed = int(read_file([os.path.join(nic_path, iface, 'speed')]))
except (OSError, ValueError):
# OSError : device doesn't support the ethtool get_link_ksettings
# ValueError : raised when the read fails, and returns Unknown
#
# Either way, we show a -1 when speed isn't available
speed = -1
if os.path.exists(os.path.join(nic_path, iface, 'bridge')):
nic_type = 'bridge'
elif os.path.exists(os.path.join(nic_path, iface, 'bonding')):
nic_type = 'bonding'
else:
nic_type = hw_lookup.get(read_file([os.path.join(nic_path, iface, 'type')]), 'Unknown')
dev_link = os.path.join(nic_path, iface, 'device')
if os.path.exists(dev_link):
iftype = 'physical'
driver_path = os.path.join(dev_link, 'driver')
if os.path.exists(driver_path):
driver = os.path.basename(os.path.realpath(driver_path))
else:
driver = 'Unknown'
else:
iftype = 'logical'
driver = ''
self.interfaces[iface] = {
'mtu': mtu,
'upper_devs_list': upper_devs_list,
'lower_devs_list': lower_devs_list,
'operstate': operstate,
'iftype': iftype,
'nic_type': nic_type,
'driver': driver,
'speed': speed,
'ipv4_address': get_ipv4_address(iface),
'ipv6_address': get_ipv6_address(iface),
}
@property
def nic_count(self):
# type: () -> int
"""Return a total count of all physical NICs detected in the host"""
phys_devs = []
for iface in self.interfaces:
if self.interfaces[iface]['iftype'] == 'physical':
phys_devs.append(iface)
return len(phys_devs)
def _get_mem_data(self, field_name):
# type: (str) -> int
for line in self._meminfo:
if line.startswith(field_name):
_d = line.split()
return int(_d[1])
return 0
@property
def memory_total_kb(self):
# type: () -> int
"""Determine the memory installed (kb)"""
return self._get_mem_data('MemTotal')
@property
def memory_free_kb(self):
# type: () -> int
"""Determine the memory free (not cache, immediately usable)"""
return self._get_mem_data('MemFree')
@property
def memory_available_kb(self):
# type: () -> int
"""Determine the memory available to new applications without swapping"""
return self._get_mem_data('MemAvailable')
@property
def vendor(self):
# type: () -> str
"""Determine server vendor from DMI data in sysfs"""
return read_file(HostFacts._dmi_path_list, 'sys_vendor')
@property
def model(self):
# type: () -> str
"""Determine server model information from DMI data in sysfs"""
family = read_file(HostFacts._dmi_path_list, 'product_family')
product = read_file(HostFacts._dmi_path_list, 'product_name')
if family == 'Unknown' and product:
return '{}'.format(product)
return '{} ({})'.format(family, product)
@property
def bios_version(self):
# type: () -> str
"""Determine server BIOS version from DMI data in sysfs"""
return read_file(HostFacts._dmi_path_list, 'bios_version')
@property
def bios_date(self):
# type: () -> str
"""Determine server BIOS date from DMI data in sysfs"""
return read_file(HostFacts._dmi_path_list, 'bios_date')
@property
def timestamp(self):
# type: () -> float
"""Return the current time as Epoch seconds"""
return time.time()
@property
def system_uptime(self):
# type: () -> float
"""Return the system uptime (in secs)"""
raw_time = read_file(['/proc/uptime'])
up_secs, _ = raw_time.split()
return float(up_secs)
@property
def kernel_security(self):
# type: () -> Dict[str, str]
"""Determine the security features enabled in the kernel - SELinux, AppArmor"""
def _fetch_selinux() -> Dict[str, str]:
"""Get the selinux status"""
security = {}
try:
out, err, code = call(self.ctx, ['sestatus'],
verbosity=CallVerbosity.DEBUG)
security['type'] = 'SELinux'
status, mode, policy = '', '', ''
for line in out.split('\n'):
if line.startswith('SELinux status:'):
k, v = line.split(':')
status = v.strip()
elif line.startswith('Current mode:'):
k, v = line.split(':')
mode = v.strip()
elif line.startswith('Loaded policy name:'):
k, v = line.split(':')
policy = v.strip()
if status == 'disabled':
security['description'] = 'SELinux: Disabled'
else:
security['description'] = 'SELinux: Enabled({}, {})'.format(mode, policy)
except Exception as e:
logger.info('unable to get selinux status: %s' % e)
return security
def _fetch_apparmor() -> Dict[str, str]:
"""Read the apparmor profiles directly, returning an overview of AppArmor status"""
security = {}
for apparmor_path in HostFacts._apparmor_path_list:
if os.path.exists(apparmor_path):
security['type'] = 'AppArmor'
security['description'] = 'AppArmor: Enabled'
try:
profiles = read_file(['/sys/kernel/security/apparmor/profiles'])
if len(profiles) == 0:
return {}
except OSError:
pass
else:
summary = {} # type: Dict[str, int]
for line in profiles.split('\n'):
item, mode = line.split(' ')
mode = mode.strip('()')
if mode in summary:
summary[mode] += 1
else:
summary[mode] = 0
summary_str = ','.join(['{} {}'.format(v, k) for k, v in summary.items()])
security = {**security, **summary} # type: ignore
security['description'] += '({})'.format(summary_str)
return security
return {}
ret = {}
if os.path.exists('/sys/kernel/security/lsm'):
lsm = read_file(['/sys/kernel/security/lsm']).strip()
if 'selinux' in lsm:
ret = _fetch_selinux()
elif 'apparmor' in lsm:
ret = _fetch_apparmor()
else:
return {
'type': 'Unknown',
'description': 'Linux Security Module framework is active, but is not using SELinux or AppArmor'
}
if ret:
return ret
return {
'type': 'None',
'description': 'Linux Security Module framework is not available'
}
@property
def selinux_enabled(self) -> bool:
return (self.kernel_security['type'] == 'SELinux') and \
(self.kernel_security['description'] != 'SELinux: Disabled')
@property
def kernel_parameters(self):
# type: () -> Dict[str, str]
"""Get kernel parameters required/used in Ceph clusters"""
k_param = {}
out, _, _ = call_throws(self.ctx, ['sysctl', '-a'], verbosity=CallVerbosity.SILENT)
if out:
param_list = out.split('\n')
param_dict = {param.split(' = ')[0]: param.split(' = ')[-1] for param in param_list}
# return only desired parameters
if 'net.ipv4.ip_nonlocal_bind' in param_dict:
k_param['net.ipv4.ip_nonlocal_bind'] = param_dict['net.ipv4.ip_nonlocal_bind']
return k_param
@staticmethod
def _process_net_data(tcp_file: str, protocol: str = 'tcp') -> List[int]:
listening_ports = []
# Connections state documentation
# tcp - https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/include/net/tcp_states.h
# udp - uses 07 (TCP_CLOSE or UNCONN, since udp is stateless. test with netcat -ul )
listening_state = {
'tcp': '0A',
'udp': '07'
}
if protocol not in listening_state.keys():
return []
if os.path.exists(tcp_file):
with open(tcp_file) as f:
tcp_data = f.readlines()[1:]
for con in tcp_data:
con_info = con.strip().split()
if con_info[3] == listening_state[protocol]:
local_port = int(con_info[1].split(':')[1], 16)
listening_ports.append(local_port)
return listening_ports
@property
def tcp_ports_used(self) -> List[int]:
return HostFacts._process_net_data('/proc/net/tcp')
@property
def tcp6_ports_used(self) -> List[int]:
return HostFacts._process_net_data('/proc/net/tcp6')
@property
def udp_ports_used(self) -> List[int]:
return HostFacts._process_net_data('/proc/net/udp', 'udp')
@property
def udp6_ports_used(self) -> List[int]:
return HostFacts._process_net_data('/proc/net/udp6', 'udp')
def dump(self):
# type: () -> str
"""Return the attributes of this HostFacts object as json"""
data = {
k: getattr(self, k) for k in dir(self)
if not k.startswith('_')
and isinstance(getattr(self, k), (float, int, str, list, dict, tuple))
}
return json.dumps(data, indent=2, sort_keys=True)
##################################
def command_gather_facts(ctx: CephadmContext) -> None:
"""gather_facts is intended to provide host releated metadata to the caller"""
host = HostFacts(ctx)
print(host.dump())
##################################
def systemd_target_state(ctx: CephadmContext, target_name: str, subsystem: str = 'ceph') -> bool:
# TODO: UNITTEST
return os.path.exists(
os.path.join(
ctx.unit_dir,
f'{subsystem}.target.wants',
target_name
)
)
def target_exists(ctx: CephadmContext) -> bool:
return os.path.exists(ctx.unit_dir + '/ceph.target')
@infer_fsid
def command_maintenance(ctx: CephadmContext) -> str:
if not ctx.fsid:
raise Error('failed - must pass --fsid to specify cluster')
target = f'ceph-{ctx.fsid}.target'
if ctx.maintenance_action.lower() == 'enter':
logger.info('Requested to place host into maintenance')
if systemd_target_state(ctx, target):
_out, _err, code = call(ctx,
['systemctl', 'disable', target],
verbosity=CallVerbosity.DEBUG)
if code:
logger.error(f'Failed to disable the {target} target')
return 'failed - to disable the target'
else:
# stopping a target waits by default
_out, _err, code = call(ctx,
['systemctl', 'stop', target],
verbosity=CallVerbosity.DEBUG)
if code:
logger.error(f'Failed to stop the {target} target')
return 'failed - to disable the target'
else:
return f'success - systemd target {target} disabled'
else:
return 'skipped - target already disabled'
else:
logger.info('Requested to exit maintenance state')
# if we've never deployed a daemon on this host there will be no systemd
# target to disable so attempting a disable will fail. We still need to
# return success here or host will be permanently stuck in maintenance mode
# as no daemons can be deployed so no systemd target will ever exist to disable.
if not target_exists(ctx):
return 'skipped - systemd target not present on this host. Host removed from maintenance mode.'
# exit maintenance request
if not systemd_target_state(ctx, target):
_out, _err, code = call(ctx,
['systemctl', 'enable', target],
verbosity=CallVerbosity.DEBUG)
if code:
logger.error(f'Failed to enable the {target} target')
return 'failed - unable to enable the target'
else:
# starting a target waits by default
_out, _err, code = call(ctx,
['systemctl', 'start', target],
verbosity=CallVerbosity.DEBUG)
if code:
logger.error(f'Failed to start the {target} target')
return 'failed - unable to start the target'
else:
return f'success - systemd target {target} enabled and started'
return f'success - systemd target {target} enabled and started'
##################################
def _get_parser():
# type: () -> argparse.ArgumentParser
parser = argparse.ArgumentParser(
description='Bootstrap Ceph daemons with systemd and containers.',
formatter_class=argparse.ArgumentDefaultsHelpFormatter)
parser.add_argument(
'--image',
help='container image. Can also be set via the "CEPHADM_IMAGE" '
'env var')
parser.add_argument(
'--docker',
action='store_true',
help='use docker instead of podman')
parser.add_argument(
'--data-dir',
default=DATA_DIR,
help='base directory for daemon data')
parser.add_argument(
'--log-dir',
default=LOG_DIR,
help='base directory for daemon logs')
parser.add_argument(
'--logrotate-dir',
default=LOGROTATE_DIR,
help='location of logrotate configuration files')
parser.add_argument(
'--sysctl-dir',
default=SYSCTL_DIR,
help='location of sysctl configuration files')
parser.add_argument(
'--unit-dir',
default=UNIT_DIR,
help='base directory for systemd units')
parser.add_argument(
'--verbose', '-v',
action='store_true',
help='Show debug-level log messages')
parser.add_argument(
'--timeout',
type=int,
default=DEFAULT_TIMEOUT,
help='timeout in seconds')
parser.add_argument(
'--retry',
type=int,
default=DEFAULT_RETRY,
help='max number of retries')
parser.add_argument(
'--env', '-e',
action='append',
default=[],
help='set environment variable')
parser.add_argument(
'--no-container-init',
action='store_true',
default=not CONTAINER_INIT,
help='Do not run podman/docker with `--init`')
subparsers = parser.add_subparsers(help='sub-command')
parser_version = subparsers.add_parser(
'version', help='get ceph version from container')
parser_version.set_defaults(func=command_version)
parser_pull = subparsers.add_parser(
'pull', help='pull latest image version')
parser_pull.set_defaults(func=command_pull)
parser_pull.add_argument(
'--insecure',
action='store_true',
help=argparse.SUPPRESS,
)
parser_inspect_image = subparsers.add_parser(
'inspect-image', help='inspect local container image')
parser_inspect_image.set_defaults(func=command_inspect_image)
parser_ls = subparsers.add_parser(
'ls', help='list daemon instances on this host')
parser_ls.set_defaults(func=command_ls)
parser_ls.add_argument(
'--no-detail',
action='store_true',
help='Do not include daemon status')
parser_ls.add_argument(
'--legacy-dir',
default='/',
help='base directory for legacy daemon data')
parser_list_networks = subparsers.add_parser(
'list-networks', help='list IP networks')
parser_list_networks.set_defaults(func=command_list_networks)
parser_adopt = subparsers.add_parser(
'adopt', help='adopt daemon deployed with a different tool')
parser_adopt.set_defaults(func=command_adopt)
parser_adopt.add_argument(
'--name', '-n',
required=True,
help='daemon name (type.id)')
parser_adopt.add_argument(
'--style',
required=True,
help='deployment style (legacy, ...)')
parser_adopt.add_argument(
'--cluster',
default='ceph',
help='cluster name')
parser_adopt.add_argument(
'--legacy-dir',
default='/',
help='base directory for legacy daemon data')
parser_adopt.add_argument(
'--config-json',
help='Additional configuration information in JSON format')
parser_adopt.add_argument(
'--skip-firewalld',
action='store_true',
help='Do not configure firewalld')
parser_adopt.add_argument(
'--skip-pull',
action='store_true',
help='do not pull the latest image before adopting')
parser_adopt.add_argument(
'--force-start',
action='store_true',
help='start newly adoped daemon, even if it was not running previously')
parser_adopt.add_argument(
'--container-init',
action='store_true',
default=CONTAINER_INIT,
help=argparse.SUPPRESS)
parser_rm_daemon = subparsers.add_parser(
'rm-daemon', help='remove daemon instance')
parser_rm_daemon.set_defaults(func=command_rm_daemon)
parser_rm_daemon.add_argument(
'--name', '-n',
required=True,
action=CustomValidation,
help='daemon name (type.id)')
parser_rm_daemon.add_argument(
'--fsid',
required=True,
help='cluster FSID')
parser_rm_daemon.add_argument(
'--force',
action='store_true',
help='proceed, even though this may destroy valuable data')
parser_rm_daemon.add_argument(
'--force-delete-data',
action='store_true',
help='delete valuable daemon data instead of making a backup')
parser_rm_cluster = subparsers.add_parser(
'rm-cluster', help='remove all daemons for a cluster')
parser_rm_cluster.set_defaults(func=command_rm_cluster)
parser_rm_cluster.add_argument(
'--fsid',
required=True,
help='cluster FSID')
parser_rm_cluster.add_argument(
'--force',
action='store_true',
help='proceed, even though this may destroy valuable data')
parser_rm_cluster.add_argument(
'--keep-logs',
action='store_true',
help='do not remove log files')
parser_rm_cluster.add_argument(
'--zap-osds',
action='store_true',
help='zap OSD devices for this cluster')
parser_run = subparsers.add_parser(
'run', help='run a ceph daemon, in a container, in the foreground')
parser_run.set_defaults(func=command_run)
parser_run.add_argument(
'--name', '-n',
required=True,
help='daemon name (type.id)')
parser_run.add_argument(
'--fsid',
required=True,
help='cluster FSID')
parser_shell = subparsers.add_parser(
'shell', help='run an interactive shell inside a daemon container')
parser_shell.set_defaults(func=command_shell)
parser_shell.add_argument(
'--shared_ceph_folder',
metavar='CEPH_SOURCE_FOLDER',
help='Development mode. Several folders in containers are volumes mapped to different sub-folders in the ceph source folder')
parser_shell.add_argument(
'--fsid',
help='cluster FSID')
parser_shell.add_argument(
'--name', '-n',
help='daemon name (type.id)')
parser_shell.add_argument(
'--config', '-c',
help='ceph.conf to pass through to the container')
parser_shell.add_argument(
'--keyring', '-k',
help='ceph.keyring to pass through to the container')
parser_shell.add_argument(
'--mount', '-m',
help=('mount a file or directory in the container. '
'Support multiple mounts. '
'ie: `--mount /foo /bar:/bar`. '
'When no destination is passed, default is /mnt'),
nargs='+')
parser_shell.add_argument(
'--env', '-e',
action='append',
default=[],
help='set environment variable')
parser_shell.add_argument(
'--volume', '-v',
action='append',
default=[],
help='set environment variable')
parser_shell.add_argument(
'command', nargs=argparse.REMAINDER,
help='command (optional)')
parser_shell.add_argument(
'--no-hosts',
action='store_true',
help='dont pass /etc/hosts through to the container')
parser_enter = subparsers.add_parser(
'enter', help='run an interactive shell inside a running daemon container')
parser_enter.set_defaults(func=command_enter)
parser_enter.add_argument(
'--fsid',
help='cluster FSID')
parser_enter.add_argument(
'--name', '-n',
required=True,
help='daemon name (type.id)')
parser_enter.add_argument(
'command', nargs=argparse.REMAINDER,
help='command')
parser_ceph_volume = subparsers.add_parser(
'ceph-volume', help='run ceph-volume inside a container')
parser_ceph_volume.set_defaults(func=command_ceph_volume)
parser_ceph_volume.add_argument(
'--shared_ceph_folder',
metavar='CEPH_SOURCE_FOLDER',
help='Development mode. Several folders in containers are volumes mapped to different sub-folders in the ceph source folder')
parser_ceph_volume.add_argument(
'--fsid',
help='cluster FSID')
parser_ceph_volume.add_argument(
'--config-json',
help='JSON file with config and (client.bootstrap-osd) key')
parser_ceph_volume.add_argument(
'--config', '-c',
help='ceph conf file')
parser_ceph_volume.add_argument(
'--keyring', '-k',
help='ceph.keyring to pass through to the container')
parser_ceph_volume.add_argument(
'command', nargs=argparse.REMAINDER,
help='command')
parser_zap_osds = subparsers.add_parser(
'zap-osds', help='zap all OSDs associated with a particular fsid')
parser_zap_osds.set_defaults(func=command_zap_osds)
parser_zap_osds.add_argument(
'--fsid',
required=True,
help='cluster FSID')
parser_zap_osds.add_argument(
'--force',
action='store_true',
help='proceed, even though this may destroy valuable data')
parser_unit = subparsers.add_parser(
'unit', help="operate on the daemon's systemd unit")
parser_unit.set_defaults(func=command_unit)
parser_unit.add_argument(
'command',
help='systemd command (start, stop, restart, enable, disable, ...)')
parser_unit.add_argument(
'--fsid',
help='cluster FSID')
parser_unit.add_argument(
'--name', '-n',
required=True,
help='daemon name (type.id)')
parser_logs = subparsers.add_parser(
'logs', help='print journald logs for a daemon container')
parser_logs.set_defaults(func=command_logs)
parser_logs.add_argument(
'--fsid',
help='cluster FSID')
parser_logs.add_argument(
'--name', '-n',
required=True,
help='daemon name (type.id)')
parser_logs.add_argument(
'command', nargs='*',
help='additional journalctl args')
parser_bootstrap = subparsers.add_parser(
'bootstrap', help='bootstrap a cluster (mon + mgr daemons)')
parser_bootstrap.set_defaults(func=command_bootstrap)
parser_bootstrap.add_argument(
'--config', '-c',
help='ceph conf file to incorporate')
parser_bootstrap.add_argument(
'--mon-id',
required=False,
help='mon id (default: local hostname)')
parser_bootstrap.add_argument(
'--mon-addrv',
help='mon IPs (e.g., [v2:localipaddr:3300,v1:localipaddr:6789])')
parser_bootstrap.add_argument(
'--mon-ip',
help='mon IP')
parser_bootstrap.add_argument(
'--mgr-id',
required=False,
help='mgr id (default: randomly generated)')
parser_bootstrap.add_argument(
'--fsid',
help='cluster FSID')
parser_bootstrap.add_argument(
'--output-dir',
default='/etc/ceph',
help='directory to write config, keyring, and pub key files')
parser_bootstrap.add_argument(
'--output-keyring',
help='location to write keyring file with new cluster admin and mon keys')
parser_bootstrap.add_argument(
'--output-config',
help='location to write conf file to connect to new cluster')
parser_bootstrap.add_argument(
'--output-pub-ssh-key',
help="location to write the cluster's public SSH key")
parser_bootstrap.add_argument(
'--skip-admin-label',
action='store_true',
help='do not create admin label for ceph.conf and client.admin keyring distribution')
parser_bootstrap.add_argument(
'--skip-ssh',
action='store_true',
help='skip setup of ssh key on local host')
parser_bootstrap.add_argument(
'--initial-dashboard-user',
default='admin',
help='Initial user for the dashboard')
parser_bootstrap.add_argument(
'--initial-dashboard-password',
help='Initial password for the initial dashboard user')
parser_bootstrap.add_argument(
'--ssl-dashboard-port',
type=int,
default=8443,
help='Port number used to connect with dashboard using SSL')
parser_bootstrap.add_argument(
'--dashboard-key',
type=argparse.FileType('r'),
help='Dashboard key')
parser_bootstrap.add_argument(
'--dashboard-crt',
type=argparse.FileType('r'),
help='Dashboard certificate')
parser_bootstrap.add_argument(
'--ssh-config',
type=argparse.FileType('r'),
help='SSH config')
parser_bootstrap.add_argument(
'--ssh-private-key',
type=argparse.FileType('r'),
help='SSH private key')
parser_bootstrap.add_argument(
'--ssh-public-key',
type=argparse.FileType('r'),
help='SSH public key')
parser_bootstrap.add_argument(
'--ssh-user',
default='root',
help='set user for SSHing to cluster hosts, passwordless sudo will be needed for non-root users')
parser_bootstrap.add_argument(
'--skip-mon-network',
action='store_true',
help='set mon public_network based on bootstrap mon ip')
parser_bootstrap.add_argument(
'--skip-dashboard',
action='store_true',
help='do not enable the Ceph Dashboard')
parser_bootstrap.add_argument(
'--dashboard-password-noupdate',
action='store_true',
help='stop forced dashboard password change')
parser_bootstrap.add_argument(
'--no-minimize-config',
action='store_true',
help='do not assimilate and minimize the config file')
parser_bootstrap.add_argument(
'--skip-ping-check',
action='store_true',
help='do not verify that mon IP is pingable')
parser_bootstrap.add_argument(
'--skip-pull',
action='store_true',
help='do not pull the latest image before bootstrapping')
parser_bootstrap.add_argument(
'--skip-firewalld',
action='store_true',
help='Do not configure firewalld')
parser_bootstrap.add_argument(
'--allow-overwrite',
action='store_true',
help='allow overwrite of existing --output-* config/keyring/ssh files')
parser_bootstrap.add_argument(
'--allow-fqdn-hostname',
action='store_true',
help='allow hostname that is fully-qualified (contains ".")')
parser_bootstrap.add_argument(
'--allow-mismatched-release',
action='store_true',
help="allow bootstrap of ceph that doesn't match this version of cephadm")
parser_bootstrap.add_argument(
'--skip-prepare-host',
action='store_true',
help='Do not prepare host')
parser_bootstrap.add_argument(
'--orphan-initial-daemons',
action='store_true',
help='Set mon and mgr service to `unmanaged`, Do not create the crash service')
parser_bootstrap.add_argument(
'--skip-monitoring-stack',
action='store_true',
help='Do not automatically provision monitoring stack (prometheus, grafana, alertmanager, node-exporter)')
parser_bootstrap.add_argument(
'--apply-spec',
help='Apply cluster spec after bootstrap (copy ssh key, add hosts and apply services)')
parser_bootstrap.add_argument(
'--shared_ceph_folder',
metavar='CEPH_SOURCE_FOLDER',
help='Development mode. Several folders in containers are volumes mapped to different sub-folders in the ceph source folder')
parser_bootstrap.add_argument(
'--registry-url',
help='url for custom registry')
parser_bootstrap.add_argument(
'--registry-username',
help='username for custom registry')
parser_bootstrap.add_argument(
'--registry-password',
help='password for custom registry')
parser_bootstrap.add_argument(
'--registry-json',
help='json file with custom registry login info (URL, Username, Password)')
parser_bootstrap.add_argument(
'--container-init',
action='store_true',
default=CONTAINER_INIT,
help=argparse.SUPPRESS)
parser_bootstrap.add_argument(
'--cluster-network',
help='subnet to use for cluster replication, recovery and heartbeats (in CIDR notation network/mask)')
parser_bootstrap.add_argument(
'--single-host-defaults',
action='store_true',
help='adjust configuration defaults to suit a single-host cluster')
parser_bootstrap.add_argument(
'--log-to-file',
action='store_true',
help='configure cluster to log to traditional log files in /var/log/ceph/$fsid')
parser_deploy = subparsers.add_parser(
'deploy', help='deploy a daemon')
parser_deploy.set_defaults(func=command_deploy)
parser_deploy.add_argument(
'--name',
required=True,
action=CustomValidation,
help='daemon name (type.id)')
parser_deploy.add_argument(
'--fsid',
required=True,
help='cluster FSID')
parser_deploy.add_argument(
'--config', '-c',
help='config file for new daemon')
parser_deploy.add_argument(
'--config-json',
help='Additional configuration information in JSON format')
parser_deploy.add_argument(
'--keyring',
help='keyring for new daemon')
parser_deploy.add_argument(
'--key',
help='key for new daemon')
parser_deploy.add_argument(
'--osd-fsid',
help='OSD uuid, if creating an OSD container')
parser_deploy.add_argument(
'--skip-firewalld',
action='store_true',
help='Do not configure firewalld')
parser_deploy.add_argument(
'--tcp-ports',
help='List of tcp ports to open in the host firewall')
parser_deploy.add_argument(
'--reconfig',
action='store_true',
help='Reconfigure a previously deployed daemon')
parser_deploy.add_argument(
'--allow-ptrace',
action='store_true',
help='Allow SYS_PTRACE on daemon container')
parser_deploy.add_argument(
'--container-init',
action='store_true',
default=CONTAINER_INIT,
help=argparse.SUPPRESS)
parser_deploy.add_argument(
'--memory-request',
help='Container memory request/target'
)
parser_deploy.add_argument(
'--memory-limit',
help='Container memory hard limit'
)
parser_deploy.add_argument(
'--meta-json',
help='JSON dict of additional metadata'
)
parser_deploy.add_argument(
'--extra-container-args',
action='append',
default=[],
help='Additional container arguments to apply to deamon'
)
parser_check_host = subparsers.add_parser(
'check-host', help='check host configuration')
parser_check_host.set_defaults(func=command_check_host)
parser_check_host.add_argument(
'--expect-hostname',
help='Check that hostname matches an expected value')
parser_prepare_host = subparsers.add_parser(
'prepare-host', help='prepare a host for cephadm use')
parser_prepare_host.set_defaults(func=command_prepare_host)
parser_prepare_host.add_argument(
'--expect-hostname',
help='Set hostname')
parser_add_repo = subparsers.add_parser(
'add-repo', help='configure package repository')
parser_add_repo.set_defaults(func=command_add_repo)
parser_add_repo.add_argument(
'--release',
help='use latest version of a named release (e.g., {})'.format(LATEST_STABLE_RELEASE))
parser_add_repo.add_argument(
'--version',
help='use specific upstream version (x.y.z)')
parser_add_repo.add_argument(
'--dev',
help='use specified bleeding edge build from git branch or tag')
parser_add_repo.add_argument(
'--dev-commit',
help='use specified bleeding edge build from git commit')
parser_add_repo.add_argument(
'--gpg-url',
help='specify alternative GPG key location')
parser_add_repo.add_argument(
'--repo-url',
default='https://download.ceph.com',
help='specify alternative repo location')
# TODO: proxy?
parser_rm_repo = subparsers.add_parser(
'rm-repo', help='remove package repository configuration')
parser_rm_repo.set_defaults(func=command_rm_repo)
parser_install = subparsers.add_parser(
'install', help='install ceph package(s)')
parser_install.set_defaults(func=command_install)
parser_install.add_argument(
'packages', nargs='*',
default=['cephadm'],
help='packages')
parser_registry_login = subparsers.add_parser(
'registry-login', help='log host into authenticated registry')
parser_registry_login.set_defaults(func=command_registry_login)
parser_registry_login.add_argument(
'--registry-url',
help='url for custom registry')
parser_registry_login.add_argument(
'--registry-username',
help='username for custom registry')
parser_registry_login.add_argument(
'--registry-password',
help='password for custom registry')
parser_registry_login.add_argument(
'--registry-json',
help='json file with custom registry login info (URL, Username, Password)')
parser_registry_login.add_argument(
'--fsid',
help='cluster FSID')
parser_gather_facts = subparsers.add_parser(
'gather-facts', help='gather and return host related information (JSON format)')
parser_gather_facts.set_defaults(func=command_gather_facts)
parser_maintenance = subparsers.add_parser(
'host-maintenance', help='Manage the maintenance state of a host')
parser_maintenance.add_argument(
'--fsid',
help='cluster FSID')
parser_maintenance.add_argument(
'maintenance_action',
type=str,
choices=['enter', 'exit'],
help='Maintenance action - enter maintenance, or exit maintenance')
parser_maintenance.set_defaults(func=command_maintenance)
parser_agent = subparsers.add_parser(
'agent', help='start cephadm agent')
parser_agent.set_defaults(func=command_agent)
parser_agent.add_argument(
'--fsid',
required=True,
help='cluster FSID')
parser_agent.add_argument(
'--daemon-id',
help='daemon id for agent')
return parser
def _parse_args(av: List[str]) -> argparse.Namespace:
parser = _get_parser()
args = parser.parse_args(av)
if 'command' in args and args.command and args.command[0] == '--':
args.command.pop(0)
# workaround argparse to deprecate the subparser `--container-init` flag
# container_init and no_container_init must always be mutually exclusive
container_init_args = ('--container-init', '--no-container-init')
if set(container_init_args).issubset(av):
parser.error('argument %s: not allowed with argument %s' % (container_init_args))
elif '--container-init' in av:
args.no_container_init = not args.container_init
else:
args.container_init = not args.no_container_init
assert args.container_init is not args.no_container_init
return args
def cephadm_init_ctx(args: List[str]) -> CephadmContext:
ctx = CephadmContext()
ctx.set_args(_parse_args(args))
return ctx
def cephadm_init_logging(ctx: CephadmContext, args: List[str]) -> None:
"""Configure the logging for cephadm as well as updating the system
to have the expected log dir and logrotate configuration.
"""
global logger
if not os.path.exists(LOG_DIR):
os.makedirs(LOG_DIR)
dictConfig(logging_config)
logger = logging.getLogger()
if not os.path.exists(ctx.logrotate_dir + '/cephadm'):
with open(ctx.logrotate_dir + '/cephadm', 'w') as f:
f.write("""# created by cephadm
/var/log/ceph/cephadm.log {
rotate 7
daily
compress
missingok
notifempty
}
""")
if ctx.verbose:
for handler in logger.handlers:
if handler.name == 'console':
handler.setLevel(logging.DEBUG)
logger.debug('%s\ncephadm %s' % ('-' * 80, args))
def cephadm_require_root() -> None:
"""Exit if the process is not running as root."""
if os.geteuid() != 0:
sys.stderr.write('ERROR: cephadm should be run as root\n')
sys.exit(1)
def main() -> None:
av: List[str] = []
av = sys.argv[1:]
ctx = cephadm_init_ctx(av)
if not ctx.has_function():
sys.stderr.write('No command specified; pass -h or --help for usage\n')
sys.exit(1)
cephadm_require_root()
cephadm_init_logging(ctx, av)
try:
# podman or docker?
ctx.container_engine = find_container_engine(ctx)
if ctx.func not in \
[
command_check_host,
command_prepare_host,
command_add_repo,
command_rm_repo,
command_install
]:
check_container_engine(ctx)
# command handler
r = ctx.func(ctx)
except Error as e:
if ctx.verbose:
raise
logger.error('ERROR: %s' % e)
sys.exit(1)
if not r:
r = 0
sys.exit(r)
if __name__ == '__main__':
main()