Install to Ubuntu Linux

Install to Ubuntu Linux — How to install milter manager to Ubuntu Linux

About this document

This document describes how to install milter manager to Ubuntu Linux. See Install for general install information.

Install packages

Jun Kobayashi , the leader of Ubuntu Japanese Team, provides milter manager package. We use the package.

If we are on Hardy Heron, we put the following content to /etc/apt/sources.list.d/milter-manager.list:

deb http://ppa.launchpad.net/jkbys/ppa/ubuntu hardy main
deb-src http://ppa.launchpad.net/jkbys/ppa/ubuntu hardy main

If we are on Intrepid Ibex, we put the following content to /etc/apt/sources.list.d/milter-manager.list:

deb http://ppa.launchpad.net/jkbys/ppa/ubuntu intrepid main
deb-src http://ppa.launchpad.net/jkbys/ppa/ubuntu intrepid main

We register the key of the package repository:

% gpg --keyserver wwwkeys.eu.pgp.net --recv-keys E1124067
% gpg --armor --export E1124067 | sudo apt-key add -

We install milter manager package:

% sudo aptitude update
% sudo aptitude -V -D -y install milter-manager
% sudo mkdir -p ~milter-manager
% sudo chown milter-manager:milter-manager ~milter-manager

We use Postfix as MTA:

% sudo aptitude -V -D -y install postfix

We use spamass-milter, clamav-milter and milter-greylist as milters:

% sudo aptitude -V -D -y install spamass-milter clamav-milter
% sudo aptitude -V -D -y --without-recommends install milter-greylist

It's the reason why --without-recommends is specified that Sendmail is recommended package. If --without-recommends option isn't specified, Sendmail is installed and Postfix is removed.

Configuration

Here is a basic configuration policy.

We use UNIX domain socket for accepting connection from MTA because security and speed.

We set read/write permission for 'postfix' group to UNIX domain socket because existing milter packages' configuration can be used.

milter-greylist should be applied only if S25R condition is matched to reduce needless delivery delay. But the configuration is automatically done by milter-manager. We need to do nothing for it.

Configure spamass-milter

At first, we configure spamd.

We add the following configuration to /etc/spamassassin/local.cf. This configuration is for adding headers only if spam detected.

report_safe 0

remove_header ham Status
remove_header ham Level

We change /etc/default/spamassassin like the following to enable spamd:

Before:

ENABLED=0

After:

ENABLED=1

spamd should be started:

% sudo /etc/init.d/spamassassin start

There are no changes for spamass-milter's configuration.


Configure clamav-milter

We change /etc/default/clamav-milter to do the followings:

  • Virus check is done by clamd not clamav-milter.

  • 'postfix' group can communicate to clamav-milter.

Before:

OPTIONS="--max-children=2 -ol"

#USE_POSTFIX='yes'
#SOCKET=local:/var/spool/postfix/clamav/clamav-milter.ctl

After:

OPTIONS="--max-children=2 -ol --external"

USE_POSTFIX='yes'
SOCKET=local:/var/spool/postfix/clamav/clamav-milter.ctl

clamav-milter should be restarted:

% sudo /etc/init.d/clamav-milter restart

Configure milter-greylist

We change /etc/milter-greylist/greylist.conf to use greylist by default:

Before:

racl whitelist default

After:

racl greylist default

We change /etc/default/milter-greylist to enable milter-greylist. milter-greylist uses IPv4 socket because milter-gresylist's run script doesn't support changing socket's group permission:

Before:

ENABLED=0

After:

ENABLED=1
SOCKET="inet:11125@[127.0.0.1]"
DOPTIONS="-P $PIDFILE -u $USER -p $SOCKET"

We need to specify not only SOCKET but also DOPTIONS because /etc/init.d/milter-greylist has a problem in 8.04 LTS Hardy Heron. The problem was fixed in 8.10 Intrepid Ibex. We doesn't need to specify DOPTIONS if we use 8.10.

milter-greylist should be started:

% sudo /etc/init.d/milter-greylist start

Configure milter-manager

milter-manager detects milters that installed in system. We can confirm spamass-milter, clamav-milter and milter-greylist are detected:

% sudo /usr/sbin/milter-manager -u milter-manager --show-config

The following output shows milters are detected:

...
define_milter("milter-greylist") do |milter|
  milter.connection_spec = "inet:11125@[127.0.0.1]"
  ...
  milter.enabled = true
  ...
end
..
define_milter("clamav-milter") do |milter|
  milter.connection_spec = "local:/var/spool/postfix/clamav/clamav-milter.ctl"
  ...
  milter.enabled = true
  ...
end
..
define_milter("spamass-milter") do |milter|
  milter.connection_spec = "unix:/var/spool/postfix/spamass/spamass.sock"
  ...
  milter.enabled = true
  ...
end
..

We should confirm that milter's name, socket path and 'enabled = true'. If the values are unexpected, we need to change /etc/milter-manager/milter-manager.conf. See Configuration for details of milter-manager.conf.

But if we can, we want to use milter manager without editing miter-manager.conf. If you report your environment to the milter manager project, the milter manager project may improve detect method.

We change /etc/default/milter-manager to work with Postfix:

Before:

#GROUP=postfix
#SOCKET_GROUP=postfix
#CONNECTION_SPEC=unix:/var/spool/postfix/milter-manager/milter-manager.sock

After:

GROUP=postfix
SOCKET_GROUP=postfix
CONNECTION_SPEC=unix:/var/spool/postfix/milter-manager/milter-manager.sock

milter-manager's configuration is completed. We start milter-manager:

% sudo /etc/init.d/milter-manager restart

/usr/bin/milter-test-server is usuful to confirm milter-manager was ran:

% sudo -u postfix milter-test-server -s unix:/var/spool/postfix/milter-manager/milter-manager.sock

Here is a sample success output:

status: pass
elapsed-time: 0.128 seconds

If milter-manager fails to run, the following message will be shown:

Failed to connect to unix:/var/spool/postfix/milter-manager/milter-manager.sock: No such file or directory

In this case, we can use log to solve the problem. milter-manager is verbosily if --verbose option is specified. milter-manager outputs logs to standard output if milter-manager isn't daemon process.

We can add the following configuration to /etc/default/milter-manager to output verbose log to standard output:

OPTION_ARGS="--verbose --no-daemon"

We start milter-manager again:

% sudo /etc/init.d/milter-manager restart

Some logs are output if there is a problem. Running milter-manager can be exitted by Ctrl+c.

OPTION_ARGS configuration in /etc/default/milter-manager should be commented out after the problem is solved to run milter-manager as daemon process. And we should restart milter-manager.


Configure Postfix

We add the following milter configuration to /etc/postfix/main.cf.

milter_default_action = accept
milter_protocol = 6
milter_mail_macros = {auth_author} {auth_type} {auth_authen}

Here are descriptions of the configuration.

milter_protocol = 6

Postfix uses milter protocol version 6.

milter_default_action = accept

Postfix accepts a mail if Postfix can't connect to milter. It's useful configuration for not stopping mail server function if milter has some problems. But it causes some problems that spam mails and virus mails may be delivered until milter is recovered.

If you can recover milter, 'tempfail' will be better choice rather than 'accept'. Default is 'tempfail'.

milter_mail_macros = {auth_author} {auth_type} {auth_authen}

Postfix passes SMTP Auth related infomation to milter. Some milters like milter-greylist use it.

We need to register milter-manager to Postfix. It's important that spamass-milter, clamav-milter, milter-greylist aren't needed to be registered because they are used via milter-manager.

We need to add the following configuration to /etc/postfix/main.cf. Note that Postfix chrooted to /var/spool/postfix/.

smtpd_milters = unix:/milter-manager/milter-manager.sock

We reload Postfix configuration:

% sudo /etc/init.d/postfix reload

Postfix's milter configuration is completed.

milter-manager logs to syslog. If milter-manager works well, some logs can be showen in /var/log/mail.info. We need to sent a test mail for confirming.

Conclusion

There are many configurations to work milter and Postfix together. They can be reduced by introducing milter-manager.

Without milter-manager, we need to specify sockets of spamass-milter, clamav-milter and milter-greylist to smtpd_milters. With milter-manager, we doesn't need to specify sockets of them, just specify a socket of milter-manager. They are detected automatically. We doesn't need to take care some small mistakes like typo.

milter-manager also supports ENABELD configuration used in /etc/default/milter-greylist. If we disable a milter, we use the following steps:

% sudo /etc/init.d/milter-greylist stop
% sudo vim /etc/default/milter-greylist # ENABLED=1 => ENABLED=0

We need to reload milter-manager after we disable a milter.

% sudo /etc/init.d/milter-manager reload

milter-manager detects a milter is disabled and doesn't use it. We doesn't need to change Postfix's main.cf.

We can reduce maintainance cost by introducing milter-manager if we use some milters on Ubuntu.