RMagick 1.7.2
README
02/23/05
Table of Contents
* Introduction <#introduction>
* Contact information <#contact_information>
* Prerequisites <#prerequisites>
* Tips for installing and configuring ImageMagick and GraphicsMagick
<#tips>
* Installing RMagick <#installing_rmagick>
o Configuration options <#configuration_options>
o Running the configure and make scripts <#running>
* Things that can go wrong <#things_that_can_go_wrong>
* Upgrading <#upgrading>
* Uninstalling <#uninstalling>
* More samples <#more_samples>
* Undocumented features <#undocumented_features>
* Known issues <#known_issues>
* Reporting bugs <#reporting_bugs>
* Credits <#credits>
* License <#license>
Introduction
RMagick is an interface between the Ruby programming language and the ImageMagick and GraphicsMagick image processing libraries.
Contact Information
Author: Tim Hunter
Email: rmagick@rubyforge.org
Prerequisites
O/S Linux, Sun Solaris, Cygwin, FreeBSD, MS Windows 98 and later. Ruby Ruby 1.6.7 or later. You can get Ruby from www.ruby-lang.org http://www.ruby-lang.org
One of
ImageMagick ImageMagick 6.0.0 or later. You can get ImageMagick from www.imagemagick.org http://www.imagemagick.org. GraphicsMagick GraphicsMagick is a friendly fork of ImageMagick 5.5.1. You can get GraphicsMagick from www.graphicsmagick.org http://www.graphicsmagick.org.
You only need one of ImageMagick or GraphicsMagick. RMagick works equally well with both. Some RMagick methods may not be supported in one or the other library.
Tips for installing and configuring ImageMagick and GraphicsMagick
if you are installing RMagick by compiling the source code, I /strongly/ encourage you to install the latest version of ImageMagick or GraphicsMagick /from source/. If you have never installed ImageMagick or GraphicsMagick before, I also strongly encourage you to read the README.txt file as many times as is necessary for you to understand how to configure it. ImageMagick and GraphicsMagick are large and complicated programs and can be difficult to configure. Follow these tips to minimize the amount of time you'll spend and your frustration level.
Do /not/ simply type ./configure and expect the defaults to be correct for you. Since you are installing ImageMagick/GraphicsMagick to use with Ruby, consider whether you want to skip ImageMagick's/GraphicMagicks' support for Perl and C++ by using the --without-perl and --without-magick-plus-plus options. Doing so will speed up the installation process and save some disk space. You will almost certainly want to specify the --enable-shared and --disable-static options.
Determine which image formats you are interested in using and make sure that you have installed the libraries that ImageMagick/GraphicsMagick uses to process these formats. ImageMagick and GraphicsMagick use additional libraries to support some image formats. If you do not install those libraries you cannot read and write those image formats. You will need to configure ImageMagick/GraphicsMagick to support the JPG, PNG, TIFF, and WMF formats in order to execute all the RMagick sample programs. See ImageMagick's or GraphicMagick's README.txt file for more information.
Once you have determined the configuration options you need, run the configure script. When it completes, read the summary output to see if configuration worked the way you expected. Here's an example of the summary output from ImageMagick's configure script. Notice that the result of each option is listed in the "Configured value" column.
Shared libraries --enable-shared=yes yes Static libraries --enable-static=no no Module support --with-modules=yes yes GNU ld --with-gnu-ld=yes yes LZW support --enable-lzw=yes yes Quantum depth --with-quantum-depth=8 8
Delegate Configuration: BZLIB --with-bzlib=yes yes DPS --with-dps=yes yes FlashPIX --with-fpx=yes no FreeType 2.0 --with-ttf=yes yes Ghostscript None gs (7.07.2) Ghostscript fonts --with-gs-font-dir=default /usr/share/fonts/default/Type1/ Ghostscript lib --with-gslib=no no Graphviz --with-dot=yes no JBIG --with-jbig=yes no JPEG v1 --with-jpeg=yes yes JPEG-2000 --with-jp2=yes no LCMS --with-lcms=yes yes Magick++ --with-magick-plus-plus=no no PERL --with-perl=no no PNG --with-png=yes yes TIFF --with-tiff=yes yes Windows fonts --with-windows-font-dir=/mnt/windows/windows/fonts /mnt/windows/windows/fonts/ WMF --with-wmf=yes yes X11 --with-x= yes XML --with-xml=yes yes ZLIB --with-zlib=yes yes
X11 Configuration: X_CFLAGS = -I/usr/X11R6/include XPRELIBS = -lSM -lICE X_LIBS = -L/usr/X11R6/lib XEXTRALIBS =
If the results are not what you wanted, install any missing libraries,
choose new or different options, or whatever it takes, erase the
config.cache file, and re-run configure. Repeat as often as necessary
before moving to the make' andmake install' steps.
Detailed information about all of ImageMagick's and GraphicsMagick's configuration options may be found in their README.txt and INSTALL.txt files.
Windows Metafile Format
As noted in the ImageMagick and GraphicsMagick README.txt files, to support images in the Windows Metafile format, ImageMagick/GraphicsMagick requires an additional library. Without this library some of the RMagick sample programs will not work. ImageMagick and GraphicsMagick require libwmf 0.2.5, 0.2.7, or 0.2.2 to support the WMF format. (Avoid libwmf 0.2.6!)
Installing RMagick
Installing RMagick is much simpler than installing ImageMagick or GraphicsMagick. Note that the /make/ step runs all the example programs. This process both builds the example images used in the documentation and validates your RMagick installation. This step can take 5-15 minutes depending on the speed of your computer.
Configuration options
Type |./configure --help| to see a list of configuration options. In addition to the regular options, there are a few RMagick-specific options:
--with-doc-dir=directory Specify the directory to install the RMagick documentation. By default this is $prefix/share/RMagick, where $prefix is the prefix specified by --prefix. For example, to install the documentation in /home/user/RMagick, specify:
./configure --with-doc-dir=/home/user/RMagick
--enable-allow-example-errors Normally the documentation installation terminates if 5 examples fail. If you use this option, the installation does not check for failing examples and will always complete. This option is useful if you're having trouble installing RMagick and you want to see all the failing examples. --with-graphics-magick If you have both ImageMagick and GraphicsMagick installed, this option will force RMagick to be configured with GraphicsMagick. --with-so-dir=directory The directory for ruby extensions. --with-ruby-path=directory The path to set the !# line in Ruby scripts. The default is |$prefix/bin/ruby|. --with-ruby-prog=name The name of the Ruby executable. The default is |ruby|. --with-make-prog=name The name of the |make| program. --with-rbconfig=path The path to the rbconfig.rb file to use. The default is Ruby's rbconfig.
Running the |configure| and |make| scripts
De-compress the RMagick-1.7.2.tar.gz archive and enter the top directory. Then type:
$ ./configure <configuration options>
$ make
($ su) $ make install (optionally) $ make clean
Things that can go wrong
Cannot open shared object file
When |make| is running the examples, if you get a message like this:
/home/you/RMagick-1.7.2/lib/RMagick.rb:11:in 'require': libMagick.so.0: cannot open shared object file: No such file or directory - /home/you/RMagick-1.7.2/ext/RMagick/RMagick.so (LoadError)
you probably do not have the directory in which the ImageMagick or
GraphicsMagick library is installed in your load path. An easy way
to fix this is to define the directory in the LD_LIBRARY_PATH
environment variable. For example, suppose you installed the
GraphicsMagick library libGraphicsMagick.so in /usr/local/lib. (By
default this is where it is installed.) Create the LD_LIBRARY_PATH
variable like this:
export LDLIBRARYPATH=/usr/local/lib
On Linux, see |ld(1)| and |ld.so(8)| for more information. On other
operating systems, see the documentation for the dynamic loading
facility.
No such file or directory - "/tmp/rmagick6872.6"
When |make| is running the examples, if you get a message like this:
hook /home/me/src/RMagick-1.7.2/./post-setup.rb failed: No such file or directory - "/tmp/rmagick6872.6"
you probably do not have a temporary directory environment variable
set. Set the TMPDIR environment variable to your temporary
directory. For example:
export TMPDIR=/home/me/tmp
Upgrading
If you upgrade to a newer release of ImageMagick or GraphicsMagick, make sure you're using a release of RMagick that supports that release. Usually I put out a new release of RMagick with every new release of ImageMagick. It's safe to install a newer release of RMagick over an earlier release.
Uninstalling
The 'uninstall' target will uninstall RMagick completely:
|make uninstall|
More samples
You can find more sample RMagick programs in the /example directory. These programs are not installed in the RMagick documentation tree.
Undocumented features
This release includes an extra feature that isn't in the documentation. The Magick module defines two methods that control ImageMagick's logging function. This function is not officially documented by ImageMagick, so I have decided not to add them to RMagick's documentation. However, you may find them helpful for debugging your application. (Caveat: these two methods may change behavior or be removed without advance notice! You are on your own!)
/Magick::setlogevent_mask(event [,...]) -> Magick/
The arguments are one or more "event domains". The setlogevent_mask method recognizes these event domains: "all", "annotate", "blob", "cache", "coder", "configure", "deprecate", "draw", "locale", "none", "resource", "transform", "user", and "x11". ImageMagick events that match the mask are logged. The default domain is "none". For example,
Magick::set_log_event_mask("render")
Logging is controlled by the log.mgk file, which may be found in the same directory as the delegates.mgk files. (See ImageMagick's README.txt file.) The purpose of the entries in this file is undocumented, so your guess is as good as mine. Also, the meaning of the event domains and exactly what events are logged are undocumented.
/Magick::setlogformat(format) -> Magick/
The default log format is described in the log.mgk file. This method allows you to redefine the format at run-time. The format argument is a string similar to an fprintf format string. Each line in the log has the format described by the format string. Characters that are not control characters are printed as-is. The control characters are:
%t - the current time
%r - the elapsed time
%u - the user time
%p - the pid (process id)
%m - the name of the ImageMagick source file that contains the
function that generated the event
%f - the name of the ImageMagick function that generated the
event
%l - the line number in the source file
%d - the event domain (one of the event mask strings listed above)
%e - the event name
For example, the default log format is:
Magick::set_log_format("%t %r %u %p %m/%f/%l/%d:\n %e")
Known issues
cc1: warning: changing search order for system directory "/usr/local/include" cc1: warning: as it has already been specified as a non-system directory
This does not indicate a problem.
/usr/include/sys/ipc.h:25:3: warning: #warning "Files using this header must be compiled with SVIDSOURCE or XOPENSOURCE"
This is harmless.
Reporting bugs
Please report bugs in RMagick, its documentation, or its installation programs to me via the bug tracker on the RMagick project page http://rubyforge.org/projects/rmagick/ at RubyForge. However, I cannot help with Ruby installation and configuration or ImageMagick or GraphicsMagick installation and configuration. Please report problems with that software to their respective authors or distributors.
Credits
Thanks to
* Akinori MUSHA, for his work making RMagick available on FreeBSD.
* Tom Payne, for reporting bugs, sending me the Ruby 1.8.0 patches,
and for the Gentoo ebuild.
* Bob Friesenhahn, for GraphicsMagick. Also for his help with the
RMagick installation and many other things.
* Simple Systems, for hosting the RMagick documentation online.
* Mike Williams, for the RMagick Debian package
* ImageMagick Studio LLC, for ImageMagick and for hosting the
RMagick documentation.
* Kaspar Schiess, for the MS Windows gem.
License
Copyright © 2004 by Timothy P. Hunter
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
http://www.opensource.org/docs/definition.php
*This software is OSI Certified Open Source Software. OSI Certified is a certification mark of the Open Source Initiative.*