[ 1.000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, [ 1.000000] 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, [ 1.000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, [ 1.000000] 2024, 2025, 2026 [ 1.000000] The NetBSD Foundation, Inc. All rights reserved. [ 1.000000] Copyright (c) 1982, 1986, 1989, 1991, 1993 [ 1.000000] The Regents of the University of California. All rights reserved. [ 1.000000] NetBSD 11.99.6 (ULTRA-PCI) #352: Thu Jun 4 17:21:46 CEST 2026 [ 1.000000] jdc@morava:/mnt/obj/sparc64/mnt/src/sys/arch/sparc64/compile/ULTRA-PCI [ 1.000000] total memory = 16384 MB [ 1.000000] avail memory = 16070 MB [ 1.000000] timecounter: Timecounters tick every 10.000 msec [ 1.000000] Kernelized RAIDframe activated [ 1.000000] mainbus0 (root): SUNW,Sun-Fire-V245 (Sun Fire V245): hostid 847a7d28 [ 1.000000] cpu0 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 0 [ 1.000000] cpu0: manuf 3e, impl 16, mask 34 [ 1.000000] cpu0: system tick frequency 20 MHz [ 1.000000] cpu0: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.000000] cpu1 at mainbus0: SUNW,UltraSPARC-IIIi @ 1504 MHz, CPU id 1 [ 1.000000] cpu1: manuf 3e, impl 16, mask 34 [ 1.000000] cpu1: system tick frequency 20 MHz [ 1.000000] cpu1: 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l) [ 1.000000] memory-controller at mainbus0 not configured [ 1.000000] memory-controller at mainbus0 not configured [ 1.000000] pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 14 [ 1.000000] pyro0: pci0 at pyro0 [ 1.000000] pci0: i/o space, memory space enabled [ 1.000000] ppb0 at pci0 dev 0 function 0: PLX Technology product 8532 (rev. 0xbb) [ 1.000000] ppb0: PCI Express capability version 1 [ 1.000000] pci1 at ppb0 bus 3 [ 1.000000] pci1: i/o space, memory space enabled [ 1.000000] ppb1 at pci1 dev 1 function 0: PLX Technology product 8532 (rev. 0xbb) [ 1.000000] ppb1: PCI Express capability version 1 x4 @ 2.5GT/s [ 1.000000] pci2 at ppb1 bus 4 [ 1.000000] pci2: i/o space, memory space enabled [ 1.000000] ppb2 at pci2 dev 0 function 0: Acer Labs M5249 Hypertransport to PCI Bridge (rev. 0x00) [ 1.000000] ppb2: PCI Express capability version 1 [ 1.000000] pci3 at ppb2 bus 5 [ 1.000000] pci3: i/o space, memory space enabled [ 1.000000] ohci0 at pci3 dev 28 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.000000] ohci0: interrupting at ivec 780 [ 1.000000] ohci0: OHCI version 1.0, legacy support [ 1.000000] usb0 at ohci0: USB revision 1.0 [ 1.000000] ohci1 at pci3 dev 28 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03) [ 1.000000] ohci1: interrupting at ivec 780 [ 1.000000] ohci1: OHCI version 1.0, legacy support [ 1.000000] ohci1: Clear PME# now [ 1.000000] usb1 at ohci1: USB revision 1.0 [ 1.000000] ehci0 at pci3 dev 28 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01) [ 1.000000] ehci0: 32-bit DMA [ 1.000000] ehci0: interrupting at ivec 781 [ 1.000000] ehci0: EHCI version 1.0 [ 1.000000] ehci0: wrong number of companions (3 != 2) [ 1.000000] ehci0: 2 companion controllers, 3 ports each: ohci0 ohci1 [ 1.000000] usb2 at ehci0: USB revision 2.0 [ 1.000000] ebus0 at pci3 dev 30 function 0: Acer Labs product 1575, revision 0x00 [ 1.000000] rtc0 at ebus0 addr 70-73: mc146818 compatible time-of-day clock: m5823 [ 1.000000] aceride0 at pci3 dev 31 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc8) [ 1.000000] aceride0: bus-master DMA support present [ 1.000000] aceride0: primary channel configured to native-PCI mode [ 1.000000] aceride0: using ivec 2f84 for native-PCI interrupt [ 1.000000] atabus0 at aceride0 channel 0 [ 1.000000] aceride0: secondary channel configured to native-PCI mode [ 1.000000] atabus1 at aceride0 channel 1 [ 1.000000] ppb3 at pci1 dev 2 function 0: PLX Technology product 8532 (rev. 0xbb) [ 1.000000] ppb3: PCI Express capability version 1 x4 @ 2.5GT/s [ 1.000000] pci4 at ppb3 bus 6 [ 1.000000] pci4: i/o space, memory space enabled [ 1.000000] Sun Microsystems Neptune (ethernet network, revision 0x01) at pci4 dev 0 function 0 not configured [ 1.000000] Sun Microsystems Neptune (ethernet network, revision 0x01) at pci4 dev 0 function 1 not configured [ 1.000000] Sun Microsystems Neptune (ethernet network, revision 0x01) at pci4 dev 0 function 2 not configured [ 1.000000] Sun Microsystems Neptune (ethernet network, revision 0x01) at pci4 dev 0 function 3 not configured [ 1.000000] ppb4 at pci1 dev 8 function 0: PLX Technology product 8532 (rev. 0xbb) [ 1.000000] ppb4: PCI Express capability version 1 x8 @ 2.5GT/s [ 1.000000] pci5 at ppb4 bus 7 [ 1.000000] pci5: i/o space, memory space enabled [ 1.000000] ppb5 at pci5 dev 0 function 0: PLX Technology PEX 8114 PCIe-to-PCI/PCI-X Bridge (rev. 0xaa) [ 1.000000] ppb5: PCI Express capability version 1 [ 1.000000] pci6 at ppb5 bus 8 [ 1.000000] pci6: i/o space, memory space enabled [ 1.000000] mpt0 at pci6 dev 8 function 0: Symbios Logic 53c1020/53c1030 (rev. 0x08) [ 1.000000] mpt0: interrupting at ivec 2f94 [ 1.000000] scsibus0 at mpt0: 16 targets, 8 luns per target [ 1.000000] mpt1 at pci6 dev 8 function 1: Symbios Logic 53c1020/53c1030 (rev. 0x08) [ 1.000000] mpt1: interrupting at ivec 2f95 [ 1.000000] scsibus1 at mpt1: 16 targets, 8 luns per target [ 1.000000] ppb6 at pci1 dev 9 function 0: PLX Technology product 8532 (rev. 0xbb) [ 1.000000] ppb6: PCI Express capability version 1 x4 @ 2.5GT/s [ 1.000000] pci7 at ppb6 bus 9 [ 1.000000] pci7: i/o space, memory space enabled [ 1.000000] ppb7 at pci7 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5) [ 1.000000] ppb7: PCI Express capability version 1 [ 1.000000] pci8 at ppb7 bus 10 [ 1.000000] pci8: i/o space, memory space enabled [ 1.000000] bge0 at pci8 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet [ 1.000000] bge0: interrupting at ivec 3795 [ 1.000000] bge0: HW config 00010115, 00000015, 00000000, 00000000 00000000 [ 1.000000] bge0: ASIC BCM5715 A3 (0x9003), Ethernet address 00:14:4f:7a:7d:28 [ 1.000000] bge0: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.000000] bge0: setting short Tx thresholds [ 1.000000] brgphy0 at bge0 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.000000] brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] bge1 at pci8 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet [ 1.000000] bge1: interrupting at ivec 3796 [ 1.000000] bge1: HW config 00000114, 00000014, 00000000, 00000000 00000000 [ 1.000000] bge1: ASIC BCM5715 A3 (0x9003), Ethernet address 00:14:4f:7a:7d:29 [ 1.000000] bge1: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.000000] bge1: setting short Tx thresholds [ 1.000000] brgphy1 at bge1 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.000000] brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] ppb8 at pci8 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4) [ 1.000000] pci9 at ppb8 bus 11 [ 1.000000] pci9: i/o space, memory space enabled [ 1.000000] ppb9 at pci1 dev 10 function 0: PLX Technology product 8532 (rev. 0xbb) [ 1.000000] ppb9: PCI Express capability version 1 x4 @ 2.5GT/s [ 1.000000] pci10 at ppb9 bus 12 [ 1.000000] pci10: i/o space, memory space enabled [ 1.000000] ppb10 at pci10 dev 0 function 0: ServerWorks BCM5714/BCM5715 Integral PCI-E to PCI-X Bridge (rev. 0xb5) [ 1.000000] ppb10: PCI Express capability version 1 [ 1.000000] pci11 at ppb10 bus 13 [ 1.000000] pci11: i/o space, memory space enabled [ 1.000000] bge2 at pci11 dev 4 function 0: Broadcom BCM5714 Gigabit Ethernet [ 1.000000] bge2: interrupting at ivec 3796 [ 1.000000] bge2: HW config 00010115, 00000015, 00000000, 00000000 00000000 [ 1.000000] bge2: ASIC BCM5715 A3 (0x9003), Ethernet address 00:14:4f:7a:7d:2a [ 1.000000] bge2: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.000000] bge2: setting short Tx thresholds [ 1.000000] brgphy2 at bge2 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.000000] brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] bge3 at pci11 dev 4 function 1: Broadcom BCM5714 Gigabit Ethernet [ 1.000000] bge3: interrupting at ivec 3797 [ 1.000000] bge3: HW config 00000114, 00000014, 00000000, 00000000 00000000 [ 1.000000] bge3: ASIC BCM5715 A3 (0x9003), Ethernet address 00:14:4f:7a:7d:2b [ 1.000000] bge3: autoconfiguration error: WARNING: failed to restrict dma range, falling back to parent bus dma range [ 1.000000] bge3: setting short Tx thresholds [ 1.000000] brgphy3 at bge3 phy 1: BCM5714 1000BASE-T/X media interface, rev. 0 [ 1.000000] brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] ppb11 at pci11 dev 8 function 0: ServerWorks HT1000 PCI/PCI-X Bridge (rev. 0xb4) [ 1.000000] pci12 at ppb11 bus 14 [ 1.000000] pci12: i/o space, memory space enabled [ 1.000000] mpt2 at pci12 dev 1 function 0: Symbios Logic SAS1064 (rev. 0x02) [ 1.000000] mpt2: interrupting at ivec 2f8f [ 1.000000] mpt2: Phy 0: Link Status Unknown [ 1.000000] mpt2: Phy 0: Link Status Unknown [ 1.000000] mpt2: Phy 0: Link Status Unknown [ 1.000000] mpt2: Phy 0: Link Status Unknown [ 1.000000] mpt2: Unknown async event: 0xb000000 [ 1.000000] mpt2: Unknown async event: 0xb000000 [ 1.000000] mpt2: Unknown async event: 0xb000000 [ 1.000000] scsibus2 at mpt2: 63 targets, 8 luns per target [ 1.000000] pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4 [ 1.000000] pyro1: pci13 at pyro1 [ 1.000000] pci13: i/o space, memory space enabled [ 1.000000] ppb12 at pci13 dev 0 function 0: Intel Serial to Parallel PCI Bridge A (rev. 0x09) [ 1.000000] ppb12: PCI Express capability version 1 [ 1.000000] pci14 at ppb12 bus 3 [ 1.000000] pci14: i/o space, memory space enabled [ 1.000000] cas0 at pci14 dev 2 function 0: National Semiconductor Saturn (rev. 0x30) [ 1.000000] STR: "phy-type" [ 1.000000] cas0: interrupting at ivec 37ce [ 1.000000] cas0: Ethernet address 00:14:4f:44:73:43 [ 1.000000] gphyter0 at cas0 phy 1: DP83865 1000BASE-T media interface, rev. 8 [ 1.000000] gphyter0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto [ 1.000000] gphyter0: strapped to slave mode [ 1.000000] ppb13 at pci13 dev 0 function 2: Intel Serial to Parallel PCI Bridge B (rev. 0x09) [ 1.000000] ppb13: PCI Express capability version 1 [ 1.000000] pci15 at ppb13 bus 4 [ 1.000000] pci15: i/o space, memory space enabled [ 1.000000] ebus1 at mainbus0 [ 1.000000] flashprom at ebus1 addr 0-1fffff not configured [ 1.000000] com0 at ebus1 addr 80-87 ipl 7c8: ns16550a, 16-byte FIFO [ 1.000000] com0: console [ 1.000000] com1 at ebus1 addr 40-47 ipl 7c9: ns16550a, 16-byte FIFO [ 1.000000] rmc-comm at ebus1 addr 0-7 ipl 7ca not configured [ 1.000000] gpio at ebus1 addr c0-c0 not configured [ 1.000000] env-monitor at ebus1 addr 0-80 not configured [ 1.000000] power at ebus1 addr 40-c1 ipl 7c3 not configured [ 1.000000] firei2c0 at mainbus0: addr 4000fd30000: Fire/MI2C i2c controller [ 1.000000] iic0 at firei2c0: I2C bus [ 1.000000] seeprom0 at iic0 addr 0x19: pdb-fru-prom: size 8192 [ 1.000000] seeprom1 at iic0 addr 0x32: sasbp-fru-prom: size 8192 [ 1.000000] seeprom2 at iic0 addr 0x36: power-supply-fru-prom: size 256 [ 1.000000] seeprom3 at iic0 addr 0x37: power-supply-fru-prom: size 256 [ 1.000000] pcf8574io0 at iic0 addr 0x3e: GPIO [ 1.000000] pcf8574io1 at iic0 addr 0x3f: GPIO [ 1.000000] pcagpio0 at iic0 addr 0x40: PCA9555 [ 1.000000] seeprom4 at iic0 addr 0x51: motherboard-fru-prom: size 8192 [ 1.000000] seeprom5 at iic0 addr 0x53: nvram: size 8192 [ 1.000000] seeprom6 at iic0 addr 0x54: riser-fru-prom: size 8192 [ 1.000000] seeprom7 at iic0 addr 0x55: riser-fru-prom: size 8192 [ 1.000000] adt7462sm0 at iic0 addr 0x58: ADT7462 system monitor: rev. 0x4 [ 1.000000] adt7462sm0: 0 fans, 4 temperatures, 5 voltages [ 1.000000] dsrtc0 at iic0 addr 0x68: DS1307 Real-time Clock/NVRAM [ 1.000000] dsrtc0: secondary clock [ 1.000000] clock-generator (i2c-ics9fg108) at iic0 addr 0x6e not configured [ 1.000000] spdmem0 at iic0 addr 0x70 [ 1.000000] spdmem0: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) [ 1.000000] spdmem0: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time [ 1.000000] spdmem0: tAA-tRCD-tRP-tRAS: 1-3-3-7 [ 1.000000] spdmem0: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) [ 1.000000] spdmem1 at iic0 addr 0x71 [ 1.000000] spdmem1: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) [ 1.000000] spdmem1: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time [ 1.000000] spdmem1: tAA-tRCD-tRP-tRAS: 1-3-3-7 [ 1.000000] spdmem1: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) [ 1.000000] spdmem2 at iic0 addr 0x72 [ 1.000000] spdmem2: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) [ 1.000000] spdmem2: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time [ 1.000000] spdmem2: tAA-tRCD-tRP-tRAS: 1-3-3-7 [ 1.000000] spdmem2: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) [ 1.000000] spdmem3 at iic0 addr 0x73 [ 1.000000] spdmem3: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) [ 1.000000] spdmem3: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time [ 1.000000] spdmem3: tAA-tRCD-tRP-tRAS: 1-3-3-7 [ 1.000000] spdmem3: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) [ 1.000000] spdmem4 at iic0 addr 0x74 [ 1.000000] spdmem4: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) [ 1.000000] spdmem4: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time [ 1.000000] spdmem4: tAA-tRCD-tRP-tRAS: 1-3-3-7 [ 1.000000] spdmem4: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) [ 1.000000] spdmem5 at iic0 addr 0x75 [ 1.000000] spdmem5: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) [ 1.000000] spdmem5: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time [ 1.000000] spdmem5: tAA-tRCD-tRP-tRAS: 1-3-3-7 [ 1.000000] spdmem5: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) [ 1.000000] spdmem6 at iic0 addr 0x76 [ 1.000000] spdmem6: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) [ 1.000000] spdmem6: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time [ 1.000000] spdmem6: tAA-tRCD-tRP-tRAS: 1-3-3-7 [ 1.000000] spdmem6: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) [ 1.000000] spdmem7 at iic0 addr 0x77 [ 1.000000] spdmem7: DDR SDRAM (registered), data ECC, 2GB, 333MHz (PC-2700) [ 1.000000] spdmem7: 13 rows, 12 cols, 2 ranks, 4 banks/chip, 6.0ns cycle time [ 1.000000] spdmem7: tAA-tRCD-tRP-tRAS: 1-3-3-7 [ 1.000000] spdmem7: voltage SSTL 2.5V, refresh time 7.8us (self-refreshing) [ 1.000000] pcons at mainbus0 not configured [ 1.000000] WARNING: system needs entropy for security; see entropy(7) [ 1.000000] timecounter: Timecounter "tick-counter" frequency 1504000000 Hz quality 100 [ 1.000003] timecounter: Timecounter "stick-counter" frequency 20000000 Hz quality 200 [ 1.000016] No counter-timer -- using %stick at 20MHz as system clock. [ 1.000016] timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 [ 2.748379] uhub0 at usb0: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.748379] uhub0: 3 ports with 3 removable, self powered [ 2.748379] uhub1 at usb1: NetBSD (0x0000) OHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1 [ 2.748379] uhub1: 3 ports with 3 removable, self powered [ 2.748379] uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1 [ 2.748379] uhub2: 8 ports with 8 removable, self powered [ 2.748379] scsibus0: waiting 2 seconds for devices to settle... [ 2.748379] scsibus1: waiting 2 seconds for devices to settle... [ 2.748379] scsibus2: waiting 2 seconds for devices to settle... [ 2.748379] IPsec: Initialized Security Association Processing. [ 2.748379] ehci0: delaying single user by 5 seconds due to USB owner change. [ 2.748379] ehci0: handing over full speed device on port 3 to ohci0 [ 2.834724] WARNING: lwp 116 (system usb2) flags 0x20000000: timecounter went backwards from (3 + 0xadab366004902d67/2^64) sec to (2 + 0xd6840faa8dd9486b/2^64) sec in netbsd:mi_switch+0xf0 [ 4.124724] uhub3 at uhub1 port 1: vendor 03eb (0x03eb) Standard USB Hub (0x3301), class 9/0, rev 1.10/3.00, addr 2 [ 4.274724] uhub3: 4 ports with 4 removable, self powered [ 19.984723] sd0 at scsibus2 target 0 lun 0: disk fixed [ 20.076743] sd0: 69943 MB, 69943 cyl, 16 head, 128 sec, 512 bytes/sect x 143243264 sectors [ 20.184723] sd0: 643456 trailing sectors not covered by disklabel [ 20.255900] sd0: tagged queueing [ 20.374723] sd1 at scsibus2 target 2 lun 0: disk fixed [ 20.484723] sd1: 136 GB, 14089 cyl, 24 head, 848 sec, 512 bytes/sect x 286739329 sectors [ 20.604723] sd1: tagged queueing [ 20.724723] sd2 at scsibus2 target 3 lun 0: disk fixed [ 20.844723] sd2: 136 GB, 14089 cyl, 24 head, 848 sec, 512 bytes/sect x 286739329 sectors [ 20.954723] sd2: tagged queueing [ 21.014723] swwdog0: software watchdog initialized [ 21.074723] sd0: 643456 trailing sectors not covered by disklabel [ 21.144723] sd0: 643456 trailing sectors not covered by disklabel [ 21.214723] WARNING: 4 errors while detecting hardware; check system log. [ 21.294723] root on bge0 [ 21.333037] nfs_boot: trying DHCP/BOOTP [ 25.434723] nfs_boot: DHCP next-server: 192.168.13.20 [ 25.484723] nfs_boot: my_name=nenya [ 25.534722] nfs_boot: my_domain=home [ 25.574723] nfs_boot: my_addr=192.168.13.76 [ 25.624723] nfs_boot: my_mask=255.255.255.0 [ 25.674723] nfs_boot: gateway=192.168.13.1 [ 35.774723] root on 192.168.13.20:/home/export/nenya/root [ 35.834723] root file system type: nfs [ 35.884723] kern.module.path=/stand/sparc64/11.99.6/modules [ 36.774723] entropy: best effort