/*	$NetBSD: ctlreg.h,v 1.29.34.1 2019/09/01 14:00:13 martin Exp $ */

/*
 * Copyright (c) 1996
 *	The President and Fellows of Harvard College. All rights reserved.
 * Copyright (c) 1992, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This software was developed by the Computer Systems Engineering group
 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
 * contributed to Berkeley.
 *
 * All advertising materials mentioning features or use of this software
 * must display the following acknowledgement:
 *	This product includes software developed by Harvard University.
 *	This product includes software developed by the University of
 *	California, Lawrence Berkeley Laboratory.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)ctlreg.h	8.1 (Berkeley) 6/11/93
 */

/*
 * Sun4m support by Aaron Brown, Harvard University.
 * Changes Copyright (c) 1995 The President and Fellows of Harvard College.
 * All rights reserved.
 */

/*
 * Sun 4, 4c, and 4m control registers. (includes address space definitions
 * and some registers in control space).
 */

/*
 * The Alternate address spaces.
 */

/*			0x00	   unused */
/*			0x01	   unused */
#define	ASI_CONTROL	0x02	/* cache enable, context reg, etc */
#define	ASI_SEGMAP	0x03	/* [4/4c] segment maps */
#define ASI_SRMMUFP	0x03	/* [4m] ref mmu flush/probe */
#define	ASI_PTE		0x04	/* [4/4c] PTE space (pmegs) */
#define ASI_SRMMU	0x04	/* [4m] ref mmu registers */
#define	ASI_REGMAP	0x06	/* [4/3-level MMU ] region maps */
#define	ASI_HWFLUSHSEG	0x05	/* [4/4c] hardware assisted version of FLUSHSEG */
#define	ASI_HWFLUSHPG	0x06	/* [4/4c] hardware assisted version of FLUSHPG */
#define ASI_SRMMUDIAG	0x06	/* [4m] */
#define	ASI_HWFLUSHCTX	0x07	/* [4/4c] hardware assisted version of FLUSHCTX */

#define	ASI_USERI	0x08	/* I-space (user) */
#define	ASI_KERNELI	0x09	/* I-space (kernel) */
#define	ASI_USERD	0x0a	/* D-space (user) */
#define	ASI_KERNELD	0x0b	/* D-space (kernel) */

#define	ASI_FLUSHREG	0x7	/* [4/4c] flush cache by region */
#define	ASI_FLUSHSEG	0x0c	/* [4/4c] flush cache by segment */
#define	ASI_FLUSHPG	0x0d	/* [4/4c] flush cache by page */
#define	ASI_FLUSHCTX	0x0e	/* [4/4c] flush cache by context */

#define	ASI_DCACHE	0x0f	/* [4] flush data cache */

#define ASI_ICACHETAG	0x0c	/* [4m] instruction cache tag */
#define ASI_ICACHEDATA	0x0d	/* [4m] instruction cache data */
#define ASI_DCACHETAG	0x0e	/* [4m] data cache tag */
#define ASI_DCACHEDATA	0x0f	/* [4m] data cache data */
#define ASI_IDCACHELFP	0x10	/* [4m] flush i&d cache line (page) */
#define ASI_IDCACHELFS	0x11	/* [4m] flush i&d cache line (seg) */
#define ASI_IDCACHELFR	0x12	/* [4m] flush i&d cache line (reg) */
#define ASI_IDCACHELFC	0x13	/* [4m] flush i&d cache line (ctxt) */
#define ASI_IDCACHELFU	0x14	/* [4m] flush i&d cache line (user) */
#define ASI_BLOCKCOPY	0x17	/* [4m] hypersparc: hardware block copy */
#define ASI_BLOCKFILL	0x1f	/* [4m] hypersparc: hardware block fill */
#define ASI_BYPASS	0x20	/* [4m] sun ref mmu bypass,
				        ie. direct phys access */
#define	ASI_CSR		0x2f	/* [4d] CPU-unit CSR space */
#define	ASI_ECSR	0x2f	/* [4d] CPU-unit ECSR space */
#define ASI_HICACHECLR	0x31	/* [4m] hypersparc only: I-cache flash clear */
#define ASI_ICACHECLR	0x36	/* [4m] ms1 only: I-cache flash clear */
#define ASI_DCACHECLR	0x37	/* [4m] ms1 only: D-cache flash clear */
#define ASI_DCACHEDIAG	0x39	/* [4m] data cache diagnostic register access */

/*
 * [4/4c] Registers in the control space (ASI_CONTROL).
 */
#define	AC_IDPROM	0x00000000	/* [4] ID PROM */
#define	AC_CONTEXT	0x30000000	/* [4/4c] context register (byte) */
#define	AC_SYSENABLE	0x40000000	/* [4/4c] system enable register (byte) */
#define	AC_DVMA_ENABLE	0x50000000	/* [4] enable user dvma */
#define	AC_BUS_ERR	0x60000000	/* [4] bus error register */
#define	AC_SYNC_ERR	0x60000000	/* [4c] sync (memory) error reg */
#define	AC_SYNC_VA	0x60000004	/* [4c] sync error virtual addr */
#define	AC_ASYNC_ERR	0x60000008	/* [4c] async error reg */
#define	AC_ASYNC_VA	0x6000000c	/* [4c] async error virtual addr */
#define	AC_DIAG_REG	0x70000000	/* [4] diagnostic reg */
#define	AC_CACHETAGS	0x80000000	/* [4/4c?] cache tag base address */
#define	AC_CACHEDATA	0x90000000	/* [4] cached data [sun4/400?] */
#define	AC_DVMA_MAP	0xd0000000	/* [4] user dvma map entries */
#define AC_VMEINTVEC	0xe0000000	/* [4] vme interrupt vector */
#define	AC_SERIAL	0xf0000000	/* [4/4c] special serial port sneakiness */
	/* AC_SERIAL is not used in the kernel (it is for the PROM) */

/* XXX: does not belong here */
#define	ME_REG_IERR	0x80		/* memory err ctrl reg error intr pending bit */

/*
 * [4/4c]
 * Bits in sync error register.  Reading the register clears these;
 * otherwise they accumulate.  The error(s) occurred at the virtual
 * address stored in the sync error address register, and may have
 * been due to, e.g., what would usually be called a page fault.
 * Worse, the bits accumulate during instruction prefetch, so
 * various bits can be on that should be off.
 */
#define	SER_WRITE	0x8000		/* error occurred during write */
#define	SER_INVAL	0x80		/* PTE had PG_V off */
#define	SER_PROT	0x40		/* operation violated PTE prot */
#define	SER_TIMEOUT	0x20		/* bus timeout (non-existent mem) */
#define	SER_SBUSERR	0x10		/* S-Bus bus error */
#define	SER_MEMERR	0x08		/* memory ecc/parity error */
#define	SER_SZERR	0x02		/* [4/vme] size error (r/w too large) */
#define	SER_WATCHDOG	0x01		/* watchdog reset (never see this) */

#define	SER_BITS \
"\20\20WRITE\10INVAL\7PROT\6TIMEOUT\5SBUSERR\4MEMERR\2SZERR\1WATCHDOG"

/*
 * [4/4c]
 * Bits in async error register (errors from DVMA or Sun-4 cache
 * writeback).  The corresponding bit is also set in the sync error reg.
 *
 * A writeback invalid error means there is a bug in the PTE manager.
 *
 * The word is that the async error register does not work right.
 */
#define	AER_WBINVAL	0x80		/* writeback found PTE without PG_V */
#define	AER_TIMEOUT	0x20		/* bus timeout */
#define	AER_DVMAERR	0x10		/* bus error during DVMA */

#define	AER_BITS	"\20\10WBINVAL\6TIMEOUT\5DVMAERR"

/*
 * [4/4c] Bits in system enable register.
 */
#define	SYSEN_DVMA	0x20		/* Enable dvma */
#define	SYSEN_CACHE	0x10		/* Enable cache */
#define	SYSEN_IOCACHE	0x40		/* Enable IO cache */
#define	SYSEN_VIDEO	0x08		/* Enable on-board video */
#define	SYSEN_RESET	0x04		/* Reset the hardware */
#define	SYSEN_RESETVME	0x02		/* Reset the VME bus */


/*
 * [4m] Bits in ASI_CONTROL space, sun4m only.
 */
#define MXCC_STREAM_DATA	0x1c00000	/* Stream data register */
#define MXCC_STREAM_SRC		0x1c00100	/* Stream source register */
#define MXCC_STREAM_DST		0x1c00200	/* Stream dest register */
#define MXCC_BIST		0x1c00800	/* Builtin self test register */
#define MXCC_CTRLREG		0x1c00a00	/* Control register for MXCC */
#define MXCC_STATREG		0x1c00b00	/* Status register for MXCC */
#define MXCC_MRST		0x1c00c00	/* Module reset register */
#define MXCC_ERROR		0x1c00e00	/* Error register */
#define MXCC_MBUSPORT		0x1c00f00	/* MBus port register */

/* Bits in MXCC_CTRLREG */
#define MXCC_CTRLREG_HC		0x1	/* Half cache (Xbus only) */
#define MXCC_CTRLREG_CS		0x2	/* E-cache size (Xbus only) */
#define MXCC_CTRLREG_CE		0x4	/* Enable e-cache */ 
#define MXCC_CTRLREG_PE		0x8	/* Parity enable */ 
#define MXCC_CTRLREG_MC		0x10	/* Multiple command enable */
#define MXCC_CTRLREG_PF		0x20	/* Prefetch enable */
#define MXCC_CTRLREG_WI		0x40	/* Write invalidate (Xbus only) */
#define MXCC_CTRLREG_BWC_MASK	0x180	/* Bus watch count (Xbus only) */
#define MXCC_CTRLREG_RC		0x200	/* Read reference count */

/* Bits in MXCC_MRST */
#define MXCC_MRST_SI		0x00000002	/* Software Internal reset */
#define MXCC_MRST_WD		0x00000004	/* Watchdog reset */

/*
 * Stream register usage:
 *	To fill a block with some value, load that value into the 64 byte
 *	stream data register (using double-word access; on Mbus only the
 *	lower 32 bytes are used), then write the physical address of
 *	the destination into the stream destination register.
 *
 *	To copy a block, write the physical address of the source into
 *	the stream source register causing the block to be transferred
 *	into the stream data register, then write the physical address of
 *	the destination into the stream destination register.
 *
 *	In both cases, or in the MXCC_STREAM_CE bit to make the transactions
 *	cache-coherent. Note that stream operations do not cause cache
 *	lines to be allocated.
 */
#define MXCC_STREAM_BLKSZ	32		/* Unit for stream ops */
#define MXCC_STREAM_C		0x1000000000ULL	/* Cacheable bit for stream ops */

/*
 * Bits in ASI_SRMMUFP space.
 *	Bits 8-11 determine the type of flush/probe.
 *	Address bits 12-31 hold the page frame.
 */
#define ASI_SRMMUFP_L3	(0<<8)	/* probe L3	| flush L3 PTE */
#define ASI_SRMMUFP_L2	(1<<8)	/* probe L2	| flush L2/L3 PTE/PTD's */
#define ASI_SRMMUFP_L1	(2<<8)	/* probe L1	| flush L1/L2/L3 PTE/PTD's*/
#define ASI_SRMMUFP_L0	(3<<8)	/* probe L0	| flush L0/L1/L2/L3 PTE/PTD's */
#define ASI_SRMMUFP_LN	(4<<8)	/* probe all	| flush all levels */

/*
 * [4m] Registers and bits in the SPARC Reference MMU (ASI_SRMMU).
 */
#define SRMMU_PCR	0x00000000	/* Processor control register */
#define SRMMU_CXTPTR	0x00000100	/* Context table pointer register */
#define SRMMU_CXR	0x00000200	/* Context register */
#define SRMMU_SFSR	0x00000300	/* Synchronous fault status reg */
#define SRMMU_SFAR	0x00000400	/* Synchronous fault address reg */
#define SRMMU_AFSR	0x00000500	/* Asynchronous fault status reg (HS) */
#define SRMMU_AFAR	0x00000600	/* Asynchronous fault address reg (HS)*/
#define SRMMU_PCFG	0x00000600	/* Processor configuration reg (TURBO)*/
#define SRMMU_RST	0x00000700	/* Reset reg */
#define SRMMU_TLBCTRL	0x00001000	/* TLB replacement control reg */


/*
 * [4m] Bits in SRMMU control register. One set per module.
 */

/* Bits 0 and 1 are common between implementations */
#define SRMMU_PCR_ME	0x00000001	/* MMU Enable */
#define SRMMU_PCR_NF	0x00000002	/* Fault inhibit bit */

#define VIKING_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
#define VIKING_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
#define VIKING_PCR_PSO	0x00000080	/* Partial Store Ordering enable */
#define VIKING_PCR_DCE	0x00000100	/* Data cache enable bit */
#define VIKING_PCR_ICE	0x00000200	/* SuperSPARC instr. cache enable */
#define VIKING_PCR_SB	0x00000400	/* Store buffer enable bit */
#define VIKING_PCR_MB	0x00000800	/* MBus mode: 0=MXCC, 1=no MXCC */
#define VIKING_PCR_PE	0x00001000	/* Enable memory parity checking */
#define VIKING_PCR_BM	0x00002000	/* 1 iff booting */
#define VIKING_PCR_SE	0x00004000	/* Coherent bus snoop enable */
#define VIKING_PCR_AC	0x00008000	/* 1=cache non-MMU accesses */
#define	VIKING_PCR_TC	0x00010000	/* 1=cache table walks */

#define HYPERSPARC_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
#define HYPERSPARC_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
#define HYPERSPARC_PCR_CE	0x00000100	/* Cache enable bit */
#define HYPERSPARC_PCR_CM	0x00000400	/* Cache mode: 1=write-back */
#define	HYPERSPARC_PCR_MR	0x00000800	/* Memory reflection: 1 = on */
#define HYPERSPARC_PCR_CS	0x00001000	/* cache size: 1=256k, 0=128k */
#define HYPERSPARC_PCR_C	0x00002000	/* enable cache when MMU off */
#define HYPERSPARC_PCR_BM	0x00004000	/* 1 iff booting */
#define HYPERSPARC_PCR_MID	0x00078000	/* MBus module ID MID<3:0> */
#define HYPERSPARC_PCR_WBE	0x00080000	/* Write buffer enable */
#define HYPERSPARC_PCR_SE	0x00100000	/* Coherent bus snoop enable */
#define HYPERSPARC_PCR_CWR	0x00200000	/* Cache wrap enable */

#define CYPRESS_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
#define CYPRESS_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
#define CYPRESS_PCR_CE	0x00000100	/* Cache enable bit */
#define CYPRESS_PCR_CL	0x00000200	/* Cache Lock (604 only) */
#define CYPRESS_PCR_CM	0x00000400	/* Cache mode: 1=write-back */
#define	CYPRESS_PCR_MR	0x00000800	/* Memory reflection: 1=on (605 only) */
#define CYPRESS_PCR_C	0x00002000	/* enable cache when MMU off */
#define CYPRESS_PCR_BM	0x00004000	/* 1 iff booting */
#define CYPRESS_PCR_MID	0x00078000	/* MBus module ID MID<3:0> (605 only) */
#define CYPRESS_PCR_MV	0x00080000	/* Multichip Valid */
#define CYPRESS_PCR_MCM	0x00300000	/* Multichip Mask */
#define CYPRESS_PCR_MCA	0x00c00000	/* Multichip Address */

#define MS1_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
#define MS1_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
#define MS1_PCR_DCE	0x00000100	/* Data cache enable */
#define MS1_PCR_ICE	0x00000200	/* Instruction cache enable */
#define MS1_PCR_RC	0x00000c00	/* DRAM Refresh control */
#define MS1_PCR_PE	0x00001000	/* Enable memory parity checking */
#define MS1_PCR_BM	0x00004000	/* 1 iff booting */
#define MS1_PCR_AC	0x00008000	/* 1=cache if ME==0 (and [ID]CE on) */
#define	MS1_PCR_ID	0x00010000	/* 1=disable ITBR */
#define	MS1_PCR_PC	0x00020000	/* Parity control: 0=even,1=odd */
#define	MS1_PCR_MV	0x00100000	/* Memory data View (diag) */
#define	MS1_PCR_DV	0x00200000	/* Data View (diag) */
#define	MS1_PCR_AV	0x00400000	/* Address View (diag) */
#define	MS1_PCR_STW	0x00800000	/* Software Tablewalk enable */

#define SWIFT_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
#define SWIFT_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
#define SWIFT_PCR_SA	0x00000080	/* Store Allocate */
#define SWIFT_PCR_DCE	0x00000100	/* Data cache enable */
#define SWIFT_PCR_ICE	0x00000200	/* Instruction cache enable */
#define SWIFT_PCR_RC	0x00003c00	/* DRAM Refresh control */
#define SWIFT_PCR_BM	0x00004000	/* 1 iff booting */
#define SWIFT_PCR_AC	0x00008000	/* 1=cache if ME=0 (and [ID]CE on) */
#define	SWIFT_PCR_PA	0x00010000	/* TCX/SX control */
#define	SWIFT_PCR_PC	0x00020000	/* Parity control: 0=even,1=odd */
#define SWIFT_PCR_PE	0x00040000	/* Enable memory parity checking */
#define	SWIFT_PCR_PMC	0x00180000	/* Page mode control */
#define	SWIFT_PCR_BF	0x00200000	/* Branch Folding */
#define	SWIFT_PCR_WP	0x00400000	/* Watch point enable */
#define	SWIFT_PCR_STW	0x00800000	/* Software Tablewalk enable */

#define TURBOSPARC_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
#define TURBOSPARC_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
#define TURBOSPARC_PCR_ICS	0x00000004	/* I-cache snoop enable */
#define TURBOSPARC_PCR_PSO	0x00000008	/* Partial Store order (ro!) */
#define TURBOSPARC_PCR_DCE	0x00000100	/* Data cache enable */
#define TURBOSPARC_PCR_ICE	0x00000200	/* Instruction cache enable */
#define TURBOSPARC_PCR_RC	0x00003c00	/* DRAM Refresh control */
#define TURBOSPARC_PCR_BM	0x00004000	/* 1 iff booting */
#define	TURBOSPARC_PCR_PC	0x00020000	/* Parity ctrl: 0=even,1=odd */
#define TURBOSPARC_PCR_PE	0x00040000	/* Enable parity checking */
#define	TURBOSPARC_PCR_PMC	0x00180000	/* Page mode control */

/* The Turbosparc's Processor Configuration Register */
#define	TURBOSPARC_PCFG_SCC	0x00000007	/* e-cache config */
#define	TURBOSPARC_PCFG_SE	0x00000008	/* e-cache enable */
#define	TURBOSPARC_PCFG_US2	0x00000010	/* microsparc II compat */
#define	TURBOSPARC_PCFG_WT	0x00000020	/* write-through enable */
#define	TURBOSPARC_PCFG_SBC	0x000000c0	/* SBus Clock */
#define	TURBOSPARC_PCFG_WS	0x03800000	/* DRAM wait states */
#define	TURBOSPARC_PCFG_RAH	0x0c000000	/* DRAM Row Address Hold */
#define	TURBOSPARC_PCFG_AXC	0x30000000	/* AFX Clock */
#define	TURBOSPARC_PCFG_SNP	0x40000000	/* DVMA Snoop enable */
#define	TURBOSPARC_PCFG_IOCLK	0x80000000	/* I/O clock ratio */


/* Implementation and Version fields are common to all modules */
#define SRMMU_PCR_VER	0x0f000000	/* Version of MMU implementation */
#define SRMMU_PCR_IMPL	0xf0000000	/* Implementation number of MMU */


/* [4m] Bits in the Synchronous Fault Status Register */
#define SFSR_EM		0x00020000	/* Error mode watchdog reset occurred */
#define SFSR_CS		0x00010000	/* Control Space error */
#define SFSR_SB		0x00008000	/* SS: Store Buffer Error */
#define SFSR_PERR	0x00006000	/* Parity error code */
#define SFSR_P		0x00004000	/* SS: Parity error */
#define SFSR_UC		0x00001000	/* Uncorrectable error */
#define SFSR_TO		0x00000800	/* S-Bus timeout */
#define SFSR_BE		0x00000400	/* S-Bus bus error */
#define SFSR_LVL	0x00000300	/* Pagetable level causing the fault */
#define SFSR_AT		0x000000e0	/* Access type */
#define SFSR_FT		0x0000001c	/* Fault type */
#define SFSR_FAV	0x00000002	/* Fault Address is valid */
#define SFSR_OW		0x00000001	/* Overwritten with new fault */

#define	SFSR_BITS	"\177\020"		\
	"b\21EM\0b\20CS\0b\17SB\0f\15\2PERR\0"	\
	"b\14UC\0b\13TO\0b\12BE\0f\10\2LVL\0"	\
	"f\05\3AT\0f\02\3FT\0b\01FAV\0b\01OW\0"

/* [4m] Synchronous Fault Types */
#define SFSR_FT_NONE		(0 << 2) 	/* no fault */
#define SFSR_FT_INVADDR		(1 << 2)	/* invalid address fault */
#define SFSR_FT_PROTERR		(2 << 2)	/* protection fault */
#define SFSR_FT_PRIVERR		(3 << 2)	/* privelege violation */
#define SFSR_FT_TRANSERR	(4 << 2)	/* translation fault */
#define SFSR_FT_BUSERR		(5 << 2)	/* access bus error */
#define SFSR_FT_INTERR		(6 << 2)	/* internal error */
#define SFSR_FT_RESERVED	(7 << 2)	/* reserved */

/* [4m] Synchronous Fault Access Types */
#define SFSR_AT_LDUDATA		(0 << 5)     	/* Load user data */
#define SFSR_AT_LDSDATA		(1 << 5)	/* Load supervisor data */
#define SFSR_AT_LDUTEXT		(2 << 5)	/* Load user text */
#define SFSR_AT_LDSTEXT		(3 << 5)	/* Load supervisor text */
#define SFSR_AT_STUDATA		(4 << 5)	/* Store user data */
#define SFSR_AT_STSDATA		(5 << 5) 	/* Store supervisor data */
#define SFSR_AT_STUTEXT		(6 << 5)	/* Store user text */
#define SFSR_AT_STSTEXT		(7 << 5)	/* Store supervisor text */
#define SFSR_AT_SUPERVISOR	(1 << 5)	/* Set iff supervisor */
#define SFSR_AT_TEXT		(2 << 5)	/* Set iff text */
#define SFSR_AT_STORE		(4 << 5)	/* Set iff store */

/* [4m] Synchronous Fault PT Levels */
#define SFSR_LVL_0		(0 << 8)	/* Context table entry */
#define SFSR_LVL_1		(1 << 8)	/* Region table entry */
#define SFSR_LVL_2		(2 << 8)	/* Segment table entry */
#define SFSR_LVL_3		(3 << 8)	/* Page table entry */

/* [4m] Asynchronous Fault Status Register bits */
#define AFSR_AFO	0x00000001	/* Async. fault occurred */
#define AFSR_AFA	0x000000f0	/* Bits <35:32> of faulting phys addr */
#define AFSR_AFA_RSHIFT	4		/* Shift to get AFA to bit 0 */
#define AFSR_AFA_LSHIFT	28		/* Shift to get AFA to bit 32 */
#define AFSR_BE		0x00000400	/* Bus error */
#define AFSR_TO		0x00000800	/* Bus timeout */
#define AFSR_UC		0x00001000	/* Uncorrectable error */
#define AFSR_SE		0x00002000	/* System error */

#define	AFSR_BITS	"\177\020"	\
	"b\15SE\0b\14UC\0b\13TO\0b\12BE\0f\04\4AFA\0b\0AFO\0"

/* [4m] TLB Replacement Control Register bits */
#define TLBC_DISABLE	0x00000020	/* Disable replacement counter */
#define TLBC_RCNTMASK	0x0000001f	/* Replacement counter (0-31) */

/* [4m] SRMMU Reset Register bits */
#define SRMMU_RST_SI	0x00000002	/* Software Internal reset */
#define SRMMU_RST_WD	0x00000004	/* Watchdog reset */

/*
 * The Ross Hypersparc has an Instruction Cache Control Register (ICCR)
 * It contains an enable bit for the on-chip instruction cache and a bit
 * that controls whether a FLUSH instruction causes an Unimplemented
 * Flush Trap or just flushes the appropriate instruction cache line.
 * The ICCR register is implemented as Ancillary State register number 31.
 */
#define HYPERSPARC_ICCR_ICE	1	/* Instruction cache enable */
#define HYPERSPARC_ICCR_FTD	2	/* Unimpl. flush trap disable */
#define HYPERSPARC_ASRNUM_ICCR	31	/* ICCR == ASR#31 */


/*
 * microSPARC-IIep has control space registers in PA[30:28] = 0x1
 */

/* Asynchronous memory Fault Status/Address Registers */
#define MSIIEP_AFSR	0x10001000
#define MSIIEP_AFAR	0x10001004

#define MSIIEP_AFSR_ERR		0x80000000 /* summary bit: LE || TO || BE */
#define MSIIEP_AFSR_LE		0x40000000 /* late error */
#define MSIIEP_AFSR_TO		0x20000000 /* time out */
#define MSIIEP_AFSR_BE		0x10000000 /* bus error */
#define MSIIEP_AFSR_S		0x01000000 /* supervisor */
#define MSIIEP_AFSR_ME		0x00080000 /* multiple error */
#define MSIIEP_AFSR_RD		0x00040000 /* read operation */
#define MSIIEP_AFSR_FAV		0x00020000 /* fault address valid */

#define MSIIEP_AFSR_BITS	"\177\20"			\
		"b\37ERR\0" "b\36LE\0" "b\35TO\0" "b\34BE\0"	\
		"b\30S\0" "b\23ME\0" "b\22RD\0" "b\21FAV\0"


/* Memory Fault Status/Address Registers (parity faults) */
#define MSIIEP_MFSR	0x10001050
#define MSIIEP_MFAR	0x10001054

#define MSIIEP_MFSR_ERR		0x80000000 /* summary bit */
#define MSIIEP_MFSR_S		0x01000000 /* supervisor */
#define MSIIEP_MFSR_CP		0x00800000 /* CPU transaction */
#define MSIIEP_MFSR_ME		0x00080000 /* multiple error */
#define MSIIEP_MFSR_ATO		0x00008000 /* PCI local bus timeout */
#define MSIIEP_MFSR_PERR_1	0x00004000 /* parity error [1] */
#define MSIIEP_MFSR_PERR_0	0x00002000 /* parity error [0] */
#define MSIIEP_MFSR_BM		0x00001000 /* boot mode */
#define MSIIEP_MFSR_C		0x00000800 /* cacheable */
#define MSIIEP_MFSR_REQ		0x000000f0 /* request type */

#define MSIIEP_MFSR_REQ_NOP		0x00
#define MSIIEP_MFSR_REQ_RD64		0x10
#define MSIIEP_MFSR_REQ_RD128		0x20
#define MSIIEP_MFSR_REQ_RD256		0x40
#define MSIIEP_MFSR_REQ_WR8		0x90
#define MSIIEP_MFSR_REQ_WR16		0xa0
#define MSIIEP_MFSR_REQ_WR32		0xb0
#define MSIIEP_MFSR_REQ_WR64		0xc0

#define MSIIEP_MFSR_BITS	"\177\20"				   \
		"b\37ERR\0" "b\30S\0" "b\27CP\0" "b\23ME\0" "b\17ATO\0"	   \
		"b\16PERR1\0" "b\15PERR0\0" "b\14BM\0" "b\13C\0"	   \
		"f\4\4REQ\0" ":\0(NOP)\0" ":\1(RD64)\0" ":\2(RD128)\0"	   \
		":\4(RD256)\0" ":\11(WR8)\0" ":\12(WR16)\0" ":\13(WR32)\0" \
		":\14(WR64)\0"