#Message ID: 03001
$$$$03001
յۥhرz /etc/fstab ɮסC
ĵi: pGzb sysinstall eACD˸mbϥΡA
L̦bɱN|QI\\
#[English]
#Attempting to rebuild your /etc/fstab file.  Warning: If you had
#any CD devices in use before running sysinstall then they may NOT
#be found by this run!

#Message ID: 03002
$$$$03002
䤣ϺСI\\
#[English]
#No disks found!

#Message ID: 03070
$$$$03070
Lkإ߷s /etc/fstab ɮסI
NHʤ覡iC\\
#[English]
#Unable to create a new /etc/fstab file!  Manual intervention
#will be required.

#Message ID: 03007
$$$$03007
Lk %s ͱJI\\
#[English]
#Unable to make mount point for: %s

#Message ID: 03014
$$$$03014
HAJùO@{ time-out ɶ\\
#[English]
#Enter time-out period in seconds for screen saver

#Message ID: 03015
$$$$03015
J NTP AWr\\
#[English]
#Enter the name of an NTP server

#Message ID: 03074
$$$$03074
w Linux AΪ禡w...\\
#[English]
#Installing Linux compatibility library...

#Message ID: 03080
$$$$03080
wܰתw]wȡC
oܤj "w" AȩM inetd(8) 
N|QҰʦbjKϥΪ̪AUAi঳@Ǧb
tΤKvšCpGo|ZzAܤw]wA
pGzTDzbAiHΰw˳]wӥNC
s /etc/rc.conf iHbӧܦ]wȡC\\
#[English]
#High security settings have been selected.
#This means that most "popular" network services and
#mechanisms like inetd(8) have been DISABLED by default.
#PLEASE NOTE that this still does not save you from having
#to properly secure your system in other ways or exercise
#due diligence in your administration, this simply picks
#a more secure set of out-of-box defaults to start with.
#To change any of these settings later, edit /etc/rc.conf

#Message ID: 03082
$$$$03082
wܤתw]wȡC
oܤj "w" AȩM inetd(8) 
N|QҰʦbjKϥΪ̪AUAi঳@Ǧb
tΤKvšCpGo|ZzAܤw]wA
pGzTDzbAiHΰw˳]wӥNC
s /etc/rc.conf iHbӧܦ]wȡC\\
#[English]
#Moderate security settings have been selected.
#This means that most "popular" network services and
#mechanisms like inetd(8) have been enabled by default
#for a comfortable user experience but with possible
#trade-offs in system security.  If this bothers you and
#you know exactly what you are doing, select one of the
#other security profiles instead.
#To change any of these settings later, edit /etc/rc.conf

#Message ID: 03084
$$$$03084
wܧCתw]wȡC
oܤj "w" AȩM inetd(8) 
N|QҰʦbjKϥΪ̪AUAi঳@Ǧb
tΤKvšCpGo|ZzAܤw]wA
pGzTDzbAiHΰw˳]wӥNC
s /etc/rc.conf iHbӧܦ]wȡC\\
#[English]
#Liberal security settings have been selected.
#This means that most "popular" network services and
#mechanisms like inetd(8) have been enabled by default
#for the most comfortable user experience but with possible
#trade-offs in system security.  If this bothers you and
#you know exactly what you are doing, select one of the
#other security profiles instead.
#To change any of these settings later, edit /etc/rc.conf

#Message ID: 03072
$$$$03072
sWMɡA@ӿ~oͥѳoخୱһݭnC
Ч󴫦w˴C^åB(Ϊ)ܤ@ӤP(]\²)ୱ
AåBAաC\\
#[English]
#An error occurred while adding the package(s) required
#by this desktop type.  Please change installation media
#and/or select a different, perhaps simpler, desktop
#environment and try again.

#Message ID: 03068
$$$$03068
X server iHΤUؤ覡ƹGάOzLƹ
deamon hCzQ{bh]wܡH
pGzQn X server hƹAЦboӮɭԿ"_"C\\
#[English]
#The X server may access the mouse in two ways: direct access
#or indirect access via the mouse daemon.  You have not
#configured the mouse daemon.  Would you like to configure it
#now?  If you intend to let the X server access the mouse
#directly, choose "No" at this time.

#Message ID: 03069
$$$$03069
zw]wBƹ deamon b椤C
 "/dev/sysmouse" ƹsB "Sysmouse"
Ϊ̱N "MouseSystems" b X windows ]wu㤤ƹ
w\\
#[English]
#You have configured and are now running the mouse daemon.
#Choose "/dev/sysmouse" as the mouse port and "SysMouse" or
#"MouseSystems" as the mouse protocol in the X configuration
#utility.

#Message ID: 03061
$$$$03061
ثeoӾާ@]DAҥHLk䴩ΤҦC
q root OܤUA %s OCpC\\
#[English]
#Currently this operation is not supported on Japanese
#mode and Chinese mode due to the bugs.  Execute %s
#command directly from root's command prompt.  Sorry.

#Message ID: 03071
$$$$03071
XFree86 ]w{ǥѤFCаݱznAդ@ܡH\\
#[English]
#The XFree86 configuration process seems to havefailed.  Would you like to try again?

#Message ID: 03016
$$$$03016
zҿܪ XFree86 ]wèSQwˡI
Цb]w XFree86 ewˡC\\
#[English]
#The XFree86 setup utility you chose does not appear to be installed!
#Please install this before attempting to configure XFree86.

#Message ID: 03050
#[no translated message!]
#$$$$03050
#\\
#[English]
#Please specify the router you wish to use.  Routed is
#provided with the stock system and gated is provided
#as an optional package which this installation system
#will attempt to load if you select gated.  Any other
#choice of routing daemon will be assumed to be something
#the user intends to install themselves before rebooting
#the system.  If you don't want any routing daemon, choose NO

#Message ID: 03051
$$$$03051
LkŪ gated packageCh^S routerC\\
#[English]
#Unable to load gated package.  Falling back to no router.

#Message ID: 03052
$$$$03052
ˬd routing daemon XСFpGzb routedA
-q  nodes OTܡA -s OhDDC\\
#[English]
#Please Specify the routing daemon flags; if you're running routed
#then -q is the right choice for nodes and -s for gateway hosts.

#Message ID: 03027
$$$$03027
SQܨӸѶ}C\\
#[English]
#No packages were selected for extraction.

#Message ID: 03039
$$$$03039
ާ@@ NFS ANzݥwˤ@ /etc/exports 
ɮסAëX@ӥDQ\iHszaɮרtΡC
{bU [ENTER] ΨӦb /etc/exports WҰʽs边\\
#[English]
#Operating as an NFS server means that you must first configure
#an /etc/exports file to indicate which hosts are allowed certain
#kinds of access to your local file systems.
#Press [ENTER] now to invoke an editor on /etc/exports

